PSI - Issue 79

Agnieszka Chowaniec-Michalak et al. / Procedia Structural Integrity 79 (2026) 198–205

205

Acknowledgements The authors received funding from the project supported by the National Science Centre, Poland within the SONATA 17 program, grant number UMO-2021/43/D/ST8/02031, entitled “Experimental evaluation of the properties of epoxy composites modified with coarse aggregate sourced from the modernization of prewar residential buildings (CARMEL)”. References A ğ can, A.E., Kartal, İ ., 2025. A review of waste-derived fillers for enhancing the properties of epoxy resins. International Journal of Adhesion and Adhesives 138, 103944. Chowaniec, A., 2021. The Effect of the Viscosity and the Contact Angle on the Pull-Off Strength of Epoxy Resin Modified with Waste Granite Powders. In: da Silva, L.F.M., Adams, R.D. (Eds.), Proceedings of the 6th International Conference on Adhesive Bonding 2021 . Springer, Cham. Chowaniec-Michalak, A., Czarnecki, S., Sadowski, Ł ., 2022. Waste granite powders as fillers in epoxy coatings: A case study in a car repair workshop. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238(7). EN ISO 6272-1:2011. Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter. European Committee for Standardization (CEN), Brussels; International Organization for Standardization (ISO), Geneva, Switzerland. Eurostat, 2024. Waste statistics – Waste generation, excluding major mineral waste, 2022. [online] Available at: https://ec.europa.eu/eurostat/statistics-explained/index.php?title=Waste_statistics Hodul, J., Mészárosová, L., Drochytka, R., 2021. Recovery of Industrial Wastes as Fillers in the Epoxy Thermosets for Building Application. Materials 14(13), 3490. Kampa, Ł ., Chowaniec, A., Królicka, A., Czarnecki, S., Sadowski, Ł ., 2022. Adhesive properties of an epoxy resin bonding agent modified with waste granite powder. Journal of Coatings Technology and Research 19, 1303–1316. Miturska-Bara ń ska, I., Antosz, K., 2025. Epoxy Adhesive Materials as Protective Coatings: Strength Property Analysis Using Machine Learning Algorithms. Materials 18(12), 2803.