PSI - Issue 79

Martin Sladký et al. / Procedia Structural Integrity 79 (2026) 421–432

432

Acknowledgements

This work was supported by project No. FSI-S-23-8163, funded through institutional support from the Ministry of Education, Youth and Sports of the Czech Republic. Research by the authors from the Czech Technical University in Prague was supported by the Grant Agency of the Czech Technical University in Prague under project No. SGS23 / 156 / OHK2 / 3T / 12.

References

ASME BPVC.VIII.2-2023, 2023. BPVC Section VIII: Rules for Construction of Pressure Vessels, Division 2 - Alternative Rules. American Society of Mechanical Engineers (ASME). New York, NY, USA. AWSD1.1 / D1.1M:2020, 2020. Structural Welding Code — Steel. American Welding Society (AWS). Miami, FL, USA. Baumgartner, J., 2017. Review and considerations on the fatigue assessment of welded joints using reference radii. International Journal of Fatigue 101, 459–468. doi: 10.1016/j.ijfatigue.2017.01.013 . Baumgartner, J., Bruder, T., 2013. An e ffi cient meshing approach for the calculation of notch stresses. Welding in the World 57, 137–145. doi: 10.1007/s40194-012-0005-3 . Baumgartner, J., Hobbacher, A.F., Rennert, R., 2020. Fatigue assessment of welded thin sheets with the notch stress approach – proposal for recommendations. International Journal of Fatigue 140, 105844. doi: 10.1016/j.ijfatigue.2020.105844 . BS 7608:2014 + A1:2015, 2015. Guide to fatigue design and assessment of steel products. British Standards Institution (BSI). London, United Kingdom. Cormier, N.G., Smallwood, B.S., Sinclair, G.B., Meda, G., 1999. Aggressive submodelling of stress concentrations. International Journal for Numerical Methods in Engineering 46, 889–909. doi: 10.1002/(SICI)1097-0207(19991030)46:6<889::AID-NME699>3.0.CO;2-F . EN 1993-1-9:2005 / AC:2009, 2009. Eurocode 3: Design of Steel Structures — Part 1-9: Fatigue. European Committee for Standardization (CEN). Brussels, Belgium. Fricke, W., 2012. IIW Recommendations for the Fatigue Assessment of Welded Structures by Notch Stress Analysis. Woodhead Publishing Series in Welding and Other Joining Technologies. 1st ed., Woodhead Publishing, Cambridge, United Kingdom. doi: 10.1533/9780857098566 . Fricke, W., 2013. IIW guideline for the assessment of weld root fatigue. Welding in the World 57, 753–791. doi: 10.1007/s40194-013-0066-y . Gurney, T.R., 1997. Fatigue of Thin Walled Joints Under Complex Loading. 1st ed., Abington Publishing, Cambridge, United Kingdom. Hobbacher, A.F., Baumgartner, J., 2024. Recommendations for Fatigue Design of Welded Joints and Components. IIW Collection. 3rd ed., Springer Cham, Cham, Switzerland. doi: 10.1007/978-3-031-57667-6 . Jiao, H., Mashiri, F., Zhao, X.L., 2013. Fatigue behavior of very high strength (vhs) circular steel tube to plate t-joints under in-plane bending. Thin-Walled Structures 68, 106–112. doi: 10.1016/j.tws.2013.03.006 . Lee, J.M., Seo, J.K., Kim, M.H., Shin, S.B., Han, M.S., Park, J.S., Mahendran, M., 2010. Comparison of hot spot stress evaluation methods for welded structures. International Journal of Naval Architecture and Ocean Engineering 2, 200–210. doi: 10.2478/IJNAOE-2013-0037 . Macdonald, K.A. (Ed.), 2011. Fracture and Fatigue of Welded Joints and Structures. Woodhead Publishing Series in Welding and Other Joining Technologies. 1st ed., Woodhead Publishing, Cambridge, United Kingdom. doi: 10.1533/9780857092502 . Machacˇ, M., Papuga, J., Doubrava, K., Fisˇer, J., 2022. Fatigue analysis of thin-walled welded hollow section joints, in: Lesiuk, G., Duda, S., Correia, J.A.F.O., De Jesus, A.M.P. (Eds.), Fatigue and Fracture of Materials and Structures, Springer Cham, Cham, Switzerland. pp. 49–55. doi: 10.1007/978-3-030-97822-8_6 . Maddox, S.J., 2002. Fatigue Strength of Welded Structures. Woodhead Publishing Series in Welding and Other Joining Technologies. 2nd ed., Woodhead Publishing, Cambridge, United Kingdom. doi: 10.1016/B978-1-85573-013-7.50010-0 . Marulo, G., Baumgartner, J., Frendo, F., 2017. Fatigue strength assessment of laser welded thin-walled joints made of mild and high strength steel. International Journal of Fatigue 96, 142–151. doi: 10.1016/j.ijfatigue.2016.11.016 . Niemi, E., Fricke, W., Maddox, S.J., 2017. Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components. IIW Collection. 2nd ed., Springer Singapore, Singapore. doi: 10.1007/978-981-10-5568-3 . Parmentier, G., Huther, M., Huther, I., Lefebvre, F., 2023. Best Practice Guideline for Statistical Analyses of Fatigue Results. IIW Collection. 1st ed., Springer Cham, Cham, Switzerland. doi: 10.1007/978-3-031-23570-2 . Radaj, D., 1990. Design and analysis of fatigue resistant welded structures. Woodhead Publishing Series in Welding and Other Joining Technolo gies. 1st ed., Woodhead Publishing, Cambridge, United Kingdom. doi: 10.1533/9781845698751 . Radaj, D., Lazzarin, P., Berto, F., 2013. Generalised neuber concept of fictitious notch rounding. International Journal of Fatigue 51, 105–115. doi: 10.1016/j.ijfatigue.2013.01.005 . Radaj, D., Sonsino, C.M., Fricke, W., 2006. Fatigue Assessment of Welded Joints by Local Approaches. Woodhead Publishing Series in Welding and Other Joining Technologies. 2nd ed., Woodhead Publishing, Cambridge, United Kingdom. doi: 10.1533/9781845691882 . Rennert, R., Kullig, E., Vormwald, M., Esderts, A., Luke, M., 2020. FKM-Guideline “Analytical Strength Assessment for Machine Components”. 7th ed., VDMA Verlag, Frankfurt am Main, Germany. Sonsino, C.M., Bruder, T., Baumgartner, J., 2010. S-n lines for welded thin joints — suggested slopes and fat values for applying the notch stress concept with various reference radii. Welding in the World 54, 375–392. doi: 10.1007/BF03266752 . Zhao, X.L., Packer, J.A., 2000. Fatigue Design Procedure for Welded Hollow Section Joints. Woodhead Publishing Series in Welding and Other Joining Technologies. 1st ed., Woodhead Publishing, Cambridge, United Kingdom. doi: 10.1533/9780857093127 .