PSI - Issue 79

Ibrahim T. Teke et al. / Procedia Structural Integrity 79 (2026) 17–25

25

Asati, B., Shajan, N., Kishore, A. V. T., Arora, K. S., & Narayanan, R. G. (2022). A comparative investigation on self-piercing riveting and resistance spot welding of automotive grade dissimilar galvanized steel sheets. International Journal of Advanced Manufacturing Technology, 123, 1079 – 109 Ertas, A. H., & Akbulut, M. (2021a). Experimental study on fatigue performance of resistance spot-welded sheet metals. International Journal of Advanced Manufacturing Technology, 114, 1205 – 1218. Ertas, A.H. (2004). Fatigue behavior of spot welds. MSc thesis, Bogazici University. Ertas, A.H. (2015). Design optimization of spot welded structures to attain maximum strength. Steel and Composite Structures, 19(4), 995 – 1009. Ertas, A.H., & Akbulut, M. (2021b). An experimental investigation into the fatigue behavior of spot welded tensile shear (TS) specimens. In Proceedings of the 8th International Conference on Fracture, Fatigue and Wear (FFW2020). Lecture Notes in Mechanical Engineering. Springer, Singapore, 423 – 427. Ertas, A.H., & Akbulut, M. (2021c). A fatigue – reliability analysis of spot welded modified tensile shear (MTS) specimens. In Proceedings of the 8th International Conference on Fracture, Fatigue and Wear (FFW2020). Lecture Notes in Mechanical Engineering. Springer, Singapore, 429 – 442. Ertas, A.H., & Sonmez, F.O. (2008). A parametric study on fatigue strength of spot-weld joints. Fatigue & Fracture of Engineering Materials & Structures, 31(9), 766 – 776. Ertas, A.H., & Sonmez, F.O. (2009). Optimization of spot-weld joints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223(3), 545 – 555. Ertas, A.H., & Sonmez, F.O. (2011). Design optimization of spot-welded plates for maximum fatigue life. Finite Elements in Analysis and Design, 47(4), 413 – 423. Ertas, A.H., Yilmaz, Y., & Baykara, C. (2008). An investigation of the effect of the gap values between the overlap portions of the spot-welded pieces on fatigue life. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222(6), 881 – 890. Ertas, A.H., Vardar, O., Sonmez, F.O., & Solim, Z. (2009). Measurement and assessment of fatigue life of spot-weld joints. Journal of Engineering Materials and Technology, 131(1), 011011. Haselhuhn, A. S., Daehn, G. S., & Carlson, B. E. (2013). Advanced resistance spot welding electrode designs for dissimilar metal joining. Welding Journal, 92(3), 59s – 66s. Haselhuhn, A. S., et al. (2017). Fatigue performance modeling of advanced resistance spot welds using structural stress and notch root methods. Engineering Failure Analysis, 73, 106 – 116. Ibrahim, M., et al. (2016). Tensile and fatigue performance of Al – steel dissimilar resistance spot welds with varied stack-ups and notch geometries. Fatigue & Fracture of Engineering Materials & Structures, 39(8), 996 – 1006. Janardhan, R., et al. (2021). Tensile and fatigue behavior of novel dissimilar resistance spot welds of AA5754 to steels: Interplay of intermetallic layer, weld nugget diameter and notch root angle. Materials Today Communications, 28, 102668. Kang, D., et al. (2020). Effect of specimen configuration on fatigue properties of dissimilar aluminum to steel resistance spot welds. Materials Testing, 62(10), 1013 – 1020. Liu, H., et al. (2013). Microstructure and fatigue properties of Mg – steel dissimilar spot welds. Science and Technology of Welding and Joining, 18(3), 241 – 248. Rao, P. B., Balasubramanian, V., & Narayanan, R. G. (2018). Effect of joining parameters on microstructure of dissimilar metal joints between aluminum and galvanized steel. Materials Science and Engineering: A, 712, 759 – 769. Shi, L., Liu, H., Zhang, J., & Li, W. (2019). Effect of coating type on microstructure and mechanical behavior of resistance spot welds of thin X626 aluminum sheet to low carbon steel. Science and Technology of Welding and Joining, 24(5), 424 – 432. Shi, L., Zhang, J., & Li, W. (2020). Effect of notch root angle on fatigue behavior of aluminum to steel resistance spot welds. Welding in the World, 64, 613 – 625. Shi, L., Zhang, J., & Li, W. (2022). Effect of specimen configuration on fatigue properties of dissimilar aluminum to steel resistance spot welds. Fatigue & Fracture of Engineering Materials & Structures, 45(2), 346 – 362. Sun, X., Stephens, E. V., Khaleel, M. A., & Davies, R. G. (2016). Fatigue behaviour of dissimilar Al 5052 and Mg AZ31 resistance spot welds . Fatigue & Fracture of Engineering Materials & Structures, 39(9), 1066 – 1077. Teke, I. T., & Ertas, A. H. (2025a). Pre-stress-integrated FEA for failure prediction in 3D-printed and injection-molded polymers. Multidiscipline Modeling in Materials and Structures, ahead-of-print. Teke, I. T., & Ertas, A. H. (2025b). Fatigue testing and life prediction of tensile shear spot-welded joints: A comprehensive review with regression modeling. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering. Walker, B., Wu, S., & Kimchi, M. (2024). Effect of Fe – Al intermetallics on fatigue properties of aluminum to steel dissimilar spot welds. Welding Journal, 103(3), 101s – 111s. Zhou, H., et al. (2022). Study on microstructures and fatigue behavior of dissimilar Al – steel resistance spot welds. Fatigue & Fracture of Engineering Materials & Structures, 45(7), 1629 – 1643.