PSI - Issue 79

Giuseppe Macoretta et al. / Procedia Structural Integrity 79 (2026) 508–516

516

References

[1] R. Kuziak, R. Kawalla, S. Waengler, Advanced high strength steels for automotive industry, Archives of Civil and Mechanical Engineering 8 (2008) 103–117. https://doi.org/10.1016/S1644-9665(12)60197-6. [2] C.D. Horvath, Advanced steels for lightweight automotive structures, in: Materials, Design and Manufacturing for Lightweight Vehicles, Elsevier, 2021: pp. 39–95. https://doi.org/10.1016/B978-0-12-818712-8.00002-1. [3] F. Aiello, M. Beghini, C.M. Belardini, L. Bertini, G. Macoretta, B.D. Monelli, R. Valentini, Proposal of a hydrogen embrittlement index for a martensitic advanced high-strength steel, Corrosion Science 222 (2023) 111357. https://doi.org/10.1016/j.corsci.2023.111357. [4] S. Chu, W. Zhu, B. Mao, G. Hu, High strain rate deformation behavior of QP1180 advanced high-strength steel for automobiles, Materials Science and Engineering: A 923 (2025) 147735. https://doi.org/10.1016/j.msea.2024.147735. [5] G. Lovicu, E.P. Bagliani, M.D. Sanctis, A. Dimatteo, R. Ishak, R. Valentini, Hydrogen embrittlement of a medium carbon Q&P steel, (n.d.). [6] W. Li, W. Wu, Q. Zhou, W. Li, J. Li, Analysis of hydrogen-induced delayed cracking and hydrogen trapping behavior in plastically deformed quenching and partitioning steel, Corrosion Science 223 (2023) 111437. https://doi.org/10.1016/j.corsci.2023.111437. [7] W. Li, Q. Zhou, W. Wu, Y. Tong, J. Li, Effect of the segregation band on the hydrogen embrittlement susceptibility of quenched and partitioned steel, Corrosion Science 222 (2023) 111436. https://doi.org/10.1016/j.corsci.2023.111436. [8] Z. Zhao, M. Liu, Q. Zhou, M. Li, Hydrogen permeation behavior of QP1180 high strength steel in simulated coastal atmosphere, Journal of Materials Research and Technology 18 (2022) 2320–2330. https://doi.org/10.1016/j.jmrt.2022.03.147. [9] M.E. Palmieri, Experimental characterization of QP1180 steel and its performance in stamping simulation: Comparison with DP1180, in: 2025: pp. 242–249. https://doi.org/10.21741/9781644903735-28. [10] M.M. Tedesco, P. Licignano, A. Mara, S. Plano, D. Gabellone, M. Basso, M. Baricco, Mechanical and Metallurgical Characterization of Advance High Strength Steel Q&P1180 Produced by Two Different Suppliers, Metals 15 (2025) 301. https://doi.org/10.3390/met15030301. [11] W. Li, W. Wu, Q. Zhou, W. Li, J. Li, Analysis of hydrogen-induced delayed cracking and hydrogen trapping behavior in plastically deformed quenching and partitioning steel, Corrosion Science 223 (2023) 111437. https://doi.org/10.1016/j.corsci.2023.111437. [12] D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, J.G. Speer, Quenching and partitioning martensite—A novel steel heat treatment, Materials Science and Engineering: A 438–440 (2006) 25–34. https://doi.org/10.1016/j.msea.2006.02.133. [13] Z. Li, R. Kiran, J. Hu, L.G. Hector, A.F. Bower, Analysis and design of a three-phase TRIP steel microstructure for enhanced fracture resistance, Int J Fract 221 (2020) 53–85. https://doi.org/10.1007/s10704-019-00405-6. [14] C.M. Belardini, G. Macoretta, B.D. Monelli, F. Berto, M.M. Tedesco, R. Valentini, Modelling of room temperature outgassing and diffusion in a martensitic advanced high-strength steel, Engineering Failure Analysis (2024) 108395. https://doi.org/10.1016/j.engfailanal.2024.108395. [15] A. Zafra, Z. Harris, C. Sun, E. Martínez-Pañeda, Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron, Journal of Natural Gas Science and Engineering 98 (2022) 104365. https://doi.org/10.1016/j.jngse.2021.104365. [16] T. Zakroczymski, Adaptation of the electrochemical permeation technique for studying entry, transport and trapping of hydrogen in metals, Electrochimica Acta 51 (2006) 2261–2266. https://doi.org/10.1016/j.electacta.2005.02.151. [17] P. Zhou, W. Li, H. Zhao, X. Jin, Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels, International Journal of Hydrogen Energy 43 (2018) 10905–10914. https://doi.org/10.1016/j.ijhydene.2018.04.241. [18] H. Li, C. Lee, J. Venezuela, H.-J. Kim, A. Atrens, Hydrogen diffusion and hydrogen embrittlement of a 1500 MPa hot-stamped steel 22MnB5 in different austenitizing conditions, Materials Science and Engineering: A 897 (2024) 146349. https://doi.org/10.1016/j.msea.2024.146349. [19] W.Y. Choo, J.Y. Lee, Effect of cold working on the hydrogen trapping phenomena in pure iron, Metallurgical Transactions A 14 (1983) 1299–1305. https://doi.org/10.1007/bf02664812.