PSI - Issue 79

Mansi Gupta et al. / Procedia Structural Integrity 79 (2026) 259–265

265

 The initial elastic stiffness increases with higher aggregate volume content; however, the peak load decreases since a larger aggregate fraction introduces more ITZ, which is assumed to be weaker than the mortar.  For identical aggregate volume fractions, the mean peak stress of specimens with circular or elliptical aggregates is slightly higher than that of specimens with polygonal aggregates. This behavior can again be attributed to the increased aggregate–mortar interfacial elements.  The size effect in geometrically similar notched beams has been successfully reproduced through the model. References Bažant, Z. P., & Oh, B. H. (1983). Crack band theory for fracture of concrete. Matériaux et construc tion, 16(3), 155-177. Bazant, Z. P., & Pfeiffer, P. A. (1987). Determination of fracture energy from size effect and brittleness number. ACI Materials Journal, 84(6), 463-480. Bažant, Z. P., Planas, J., & Bazant, Z. P. (1998). Fracture and size effect in c oncrete and other quasibrittle materials. Bhowmik, S., & Ray, S. (2019). An experimental approach for ch aracterization of fracture process zone in concrete. Engineering Fracture Mechanics, 211, 401-419. Carrara, P., Kruse, R., Bentz, D. P., Lunardelli, M., Leusmann, T., Varady, P. A., & De Lorenzis, L. (2018). Improved mesoscale segmentation of concrete from 3D X-ray images using contrast enhancers. Cement and Concrete Composites, 93, 30-42. Chen, Q., Zhang, J., Wang, Z., Zhao, T., & Wang, Z. (2024). A review of the interfaci al transition zones in concrete: Identification, physical characteristics, and mechanical properties. Engineering Fracture Mechanics, 300, 109979. Gopalaratnam, V. S., & Shah, S. P. (1985). Softening response of plain concrete in direct te nsion. ACI journal, 82(3), 310-323. Hillerborg, A., Modéer, M., & Petersson, P. E. (1976). Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and concrete research, 6(6), 773-781. Kaplan, M. F. (1961, November). Crack propagation and the fracture of concrete. In Journal Proceedings (Vol. 58, No. 11, pp. 591-610). Kargari, A., Akhaveissy, A. H., & Pietruszczak, S. (2023). Experimental and meso-scale investigation of size effect on fracture properties in three-point concrete beams (TPB). Theoretical and Applied Fracture Mechanics, 127, 104026. Kesler, C. E., Naus, D. J., & Lott, J. L. (1972). Fracture mechanics-its applicability to concrete. In Proceedings of the Socie ty of Materials Science Conference on the Mechanical Behavior of Materials. (No. Conf Paper). Kwan, A. K. H., Wang, Z. M., & Chan, H. C. (1999). Mesoscopic study of concrete II: nonlinear finite element analysis. Computers & structures, 70(5), 545-556. Manual, A. (2013). ABAQUS documentation version 6.13. Dassault Systems SIMULIA Corp., Providence, RI, USA. Petersson, P. E. (1981). Crack growth and development of fracture zones in plain concrete and similar materials. Roesler, J., Paulino, G. H., Park, K., & Gaedicke, C. (2007). Concrete fracture prediction using bilinear softening. Cement and Concrete Composites, 29(4), 300-312. Skar ż y ń ski, Ł ., & Tejchman, J. (2016). Experimental investigations of fracture process in concrete by means of X ‐ ray micro ‐ computed tomography. Strain, 52(1), 26-45. Skar ż y ń ski, Ł ., Nitka, M., & Tejchman, J. (2015). Mode lling of concrete fracture at aggregat e level using FEM and DEM based on X-ray μ CT images of internal structure. Engineering fracture mechanics, 147, 13-35. Thilakarathna, P. S. M., Baduge, K. K., Mendis, P., Vimonsatit, V., & Lee, H. (2020). Mesoscale m odelling of concrete–a review of geometry generation, placing algorithms, constitutive relations and a pplications. Engineering Fracture Mechanics, 231, 106974. Trawi ń ski, W., Bobi ń ski, J., & Tejchman, J. (2016). Two-dimensional simulations of concrete fracture at aggregate level with cohesive elements based on X-ray μ CT images. Engineering Fracture Mechanics, 168, 204-226. Trawi ń ski, W., Tejchman, J., & Bobi ń ski, J. (2018). A three-dimensional meso-scale modelling of c oncrete fracture, based on cohesive elements and X-ray μ CT images. Engineering fracture mechanics, 189, 27-50. Wang, X. F., Yang, Z. J., Yates, J. R., Jivkov, A. P., & Zhang, C. (2015). Monte Carlo simulations of mesoscale fracture modell ing of concrete with random aggregates and pores. Construction and Building Materials, 75, 35-45. Wang, X., Yang, Z., & Jivkov, A. P. (2015). Monte Carlo simulations of mesoscale fracture of concrete with random aggregates and pores: a size effect study. Construction and Building Materials, 80, 262-272. Wang, Z. M., Kwan, A. K. H., & Chan, H. C. (1999). Mesoscopic st udy of concrete I: generation of random aggregate structure and finite element mesh. Computers & structures, 70(5), 533-544. Wriggers, P., & Moftah, S. O. (2006). Mesoscale models for concrete: Hom ogenisation and damage behaviour. Finite elements in analysis and design, 42(7), 623-636. Wriggers, P., & Moftah, S. O. (2006). Mesoscale models for concrete: Hom ogenisation and damage behaviour. Finite elements in analysis and design, 42(7), 623-636. Yang, Z. J., Li, B. B., & Wu, J. Y. (2019). X-ray computed tomography images based phase-field modeling of mesoscopic failure in concrete. Engineering Fracture Mechanics, 208, 151-170. Zhu, S., Zhou, Z., & Xiong, Y. (2024). Mesoscale fracture analysis of three-point bending concre te beams based on cohesive zone model. Engineering Fracture Mechanics, 296, 109828.