PSI - Issue 78

Andrea Gennaro et al. / Procedia Structural Integrity 78 (2026) 663–670

670

point‑constrained solution yielded the lower objective‑function value, confirming that the lumped‑spring representation can more flexibly accommodate unknown abutment dimensions and additional soil effects than an explicitly modelled abutment of assumed geometry. Acknowledgements This study was carried out within the RETURN Extended Partnership and received funding from the European Union Next‑GenerationEU under the National Recovery and Resilience Plan (NRRP, Mission 4, Component 2, Investment 1.3 – D.D. 1243 2/8/2022, PE0000005), with additional support from ReLUIS through the C.S.LL.PP./ReLUIS Project 2021 – 2024. Allemang, R.J., Brown, D.L., 1982. A Correlation Coefficient for Modal Vector Analysis. Proceedings of the 1st International Modal Analysis Conference, pp. 110 – 116. Brownjohn, J.M.W., Xia, P.Q., Hao, H., Xia, Y., 2001. Civil Structure Condition Assessment by FE Model Updating: Methodology and Case Studies. Finite Elements in Analysis and Design 37, 761 – 775. Cunha, Á., Caetano, E., Calçada, R., De Roeck, G., Peeters, B., 2003. Dynamic Measurements on Bridges: Design, Rehabilitation and Monitoring. Proceedings of the Institution of Civil Engineers – Bridge Engineering 156, 135 – 148. De Domenico, D., Mazzeo, M., Messina, D., Santoro, R., Recupero, A., 2025. Structural Health Assessment of Concrete Half-Joint Bridges: From Load Testing to FEM Simulation Accounting for Material Uncertainties. Structure and Infrastructure Engineering, in press. Del Giudice, G., 1967. Ponte a travata Gerber in cemento armato . Casa Editrice Vitali & Ghianda, Genova. FEMtools, 2012. FEMtools 3.6 – Release Notes . Dynamic Design Solutions, Leuven, Belgium. Friswell, M.I., Mottershead, J.E., 1995. Finite Element Model Updating in Structural Dynamics . Springer, Dordrecht. Giglioni, V., Poole, J., Venanzi, I., Ubertini, F., Worden, K., 2024. A Domain Adaptation Approach to Damage Classification with an Application to Bridge Monitoring. Mechanical Systems and Signal Processing 209, 111135. Lorenzoni, F., De Conto, N., da Porto, F., Modena, C., 2019. Ambient and Free -Vibration Tests to Improve the Quantification and Estimation of Modal Parameters in Existing Bridges. Journal of Civil Structural Health Monitoring 9, 617 – 637. MIDAS IT, 2022. Midas Civil: Analysis Manual for Civil Structures . MIDAS Information Technology Co., Ltd., Gyeonggi - do, South Korea. Mottershead, J.E., Link, M., Friswell, M.I., 2011. The Sensitivity Method in Finite Element Model Updating: A Tutorial. Mecha nical Systems and Signal Processing 25, 2275 – 2296. Neville, A.M., Brooks, J.J., 2010. Concrete Technology , 2nd ed. Pearson Education, Essex, UK. NTC, 2018. D.M. 17 gennaio 2018. Aggiornamento delle Norme Tecniche per le Costruzioni. Supplemento Ordinario alla Gazzetta Ufficiale n. 42, 20 febbraio 2018. Peeters, B., Van Der Auweraer, H., 2005. PolyMax: A Revolution in Operational Modal Analysis. 1st International Operational Modal Analysis Conference, Copenhagen, Denmark. Rao, S.S., 2010. The Finite Element Method in Engineering , 5th ed. Elsevier, Oxford. Reynders, E., Schevenels, M., De Roeck, G., 2014. MACEC 3.3 – User’s Manual . KU Leuven, Department of Civil Engineering, Leuven, Belgium. Saler, E., Pernechele, V., Lorenzoni, F., Biasetto, L., da Porto, F., 2020. Dynamic Identification and Calibration of an Arch Steel Bridge Model for the Evaluation of Corrosion Effects. Structural Integrity 11, 883 – 891. Salvalaggio, M., Lorenzoni, F., Valluzzi, M.R., 2024. Impact of Sound-Insulated Joints in the Dynamic Behavior of Cross-Laminated Timber Structures. Journal of Building Engineering 91, 109525. References