PSI - Issue 78

Samuele Faini et al. / Procedia Structural Integrity 78 (2026) 718–725

725

References

Ayorinde, E.O., Warburton, G.B., 1980. Minimizing structural vibrations with absorbers. Earthquake Engineering and Structural Dynamics 8(3), 219 – 236. Caetano, E., Cunha, A., Moutinho, C., 2007. Implementation of passive devices for vibration control at Coimbra footbridge. 2nd International Conference on Experimental Vibration Analysis for Civil Engineering Structures (EVACES). Porto, Portugal. CEN, European Committee for Standardization, 2001. EN10002 - Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature. Bruxelles, Belgium. CEN, European Committee for Standardization, 2004. EN1992 - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings. Bruxelles, Belgium. CEN, European Committee for Standardization, 2019. EN12504 - Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression. Bruxelles, Belgium. CEN, European Committee for Standardization, 2021. EN12390 - Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression. Bruxelles, Belgium. Chang, G.A., and Mander, J.B., 1994. Seismic Energy Based Fatigue Damage Ananlysis of Bridge Columns: Part 1 - Evaluation of Seismic Capacity. Technical Report NCEER-94-0006. University at Buffalo, State University of New York, United States. Crisci, G., Ceroni, F., Lignola, G.P., Prota, A., 2022. Critical issues in existing RC deck stiffened arch bridges under seismic actions. Engineering Structures 272. CSLP, Ministero dei Lavori Pubblici - Consiglio Superiore, 1957. Circolare n. 1472 - Armatura delle strutture in cemento armato (in Italian). CSLP, Consiglio superiore dei lavori pubblici, 2018. Nuove norme sismiche per il calcolo strutturale (DM 17.01.2018, in Italian). Dallard, P., Fitzpatrick, A.J., Flint, A., Le Bourva, S., Low, A., Ridsdill Smith, R.M., Willford, M., 2001. The London Millennium Footbridge. The Structural Engineer 79(22), 17 – 33. ESM, Engineering Strong Motion database. Accessed the 24/04/2025 at: https://esm-db.eu/#/home. Frahm, H., 1909. US patent No. US989958A. Device for damping vibrations of bodies. Gandelli, E., Faccin, E., Faini, S., Facconi, L., Minelli, F., 2025. Seismic Retrofit of a Reinforced Concrete Arch Bridge using Low-Mass Tuned Mass Dampers. Journal of Bridge Engineering (submitted). Guidi, L.G., De Luca, A., 2025. Retrofitting Alternatives for an Existing Maillart-Arch-Type Bridge: A Case Study. Structural Engineering International 35(2), 171 – 190. Imperadore, S., Rinaldi, Z., Drago, C., 2017. Degradation relationships for the mechanical properties of corroded steel rebars. Construction and Building Materials 148, 219 – 230. Khan, E., Sullivan, T.J., Kowalsky, M.J., 2014. Direct Displacement – Based Seismic Design of Reinforced Concrete Arch Bridges. Journal of Bridge Engineering 19(1), 44 – 58. Lomiento, G., Danielian, S.A., 2024. Seismic energy-based design of isolated bridges. 18th World Conference on Earthquake Engineering (WCEE). Milan, Italy. Menegotto M., Pinto P.E., 1973. Method of Analysis for Cyclic Loaded R.C. Plane Frame Including Changes in Geometry and Non-Elastic Behaviour of Elements under Combined Normal Force and Bending. IABSE Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Preliminary Report. Lisbon, Portugal. Midas-Support. Analysis Manual 2023. Accessed the 10/02/2025 at: https://support.midasuser.com/hc/en-us/p/gate_product_manual. Modena, C., Tecchio, G., Pellegrino, C., Da Porto, F., Donà, M., Zampieri, P., Zanini, M.A., 2015. Reinforced concrete and masonry arch bridges in seismic areas: typical deficiencies and retrofitting strategies. Structure and Infrastructure Engineering: Maintenance, Management, Life Cycle Design and Performance 11(4), 415-442. Pavese, A., Bolognini, D., Peloso, S., 2004. FRP seismic retrofit of RC square hollow section bridge piers. Journal of Earthquake Engineering 8(1), 225 – 250. Reggia, A., Morbi, A., Plizzari, G.A., 2020. Experimental study of a reinforced concrete bridge pier strengthened with HPFRC jacketing. Engineering Structures210. SeismoSoft. SeismoMatch v. 2024. Available at: https://seismosoft.com/product/seismomatch/. Poon, D., Shieh, S.S., Joseph, L.M., Chang, C.C. 2004. Structural Design of Taipei 101, the World’s Tallest Building. CTBUH 2004 Seoul conference. Seoul, Korea. Rodríguez, J., Ortega, L. M., Casal, J. & Diez, J. M. , 2004. Corrosion of Reinforcement and Service Life of Concrete Structures. Durability of Building Materials & Components. Routledge, Taylor & Francis group, London. Savor, Z., Mujkanovic, N., and Hrelja, G., 2008. Design and construction of KRKA River arch bridge. Chinese-Croatian Joint Colloquium on Long Arch Bridges. Fuzhou, China. Verderame, G.M., Stella, A., Cosenza, E., 2001. Le proprietà meccaniche degli acciai impiegati nelle strutture in c.a. realizzate n egli anni ‘60. 10th Congresso Nazionale “L’ingegneria Sismica in Italia” .Matera,Italy (in Italian). Wang, W., Chen, S., Chen, B., Liu, G., Hua, X., Chen, Z., 2025. Development and application of metallic dampers in bridge engineering: A review. Journal of Traffic and Transportation Engineering (English Edition) 12(2), 236 – 268. Weber, F., Distl, J., Maslanka, M., 2013. Semi-Active TMD Concept for Volgograd Bridge. Topics in Dynamics of Civil Structures 4, 79 – 88.