PSI - Issue 78

Available online at www.sciencedirect.com

ScienceDirect

Procedia Structural Integrity 78 (2026) 1048–1055

© 2025 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of XX ANIDIS Conference organizers Keywords: Masonry arch bridges; Non-linear 3D FEM modelling; Concrete Damage Plasticity; Uncertainty Abstract The structural assessment of masonry arch bridges is often hindered by uncertainties related to geometry, materials, and loading conditions, particularly under seismic actions. This study proposes a modelling strategy that enables advanced numerical analysis of such structures through the calibration of a simplified finite element model. As a case study, the San Marcello Pistoiese bridge in Italy has been selected, for which an extensive prior documentation and literature studies were available, including laboratory testing and dynamic identification, which enables the validation of numerical simulations against experimental data. For the case study, two models are developed: a detailed three-dimensional solid model and a reduced shell-based model referred to as the Shell-Box Model (SBM). Both models implement the Concrete Damage Plasticity (CDP) approach to capture the non-linear behavior of masonry materials. The Shell-Box Model, once calibrated against the solid model with the regard to the modal characteristics, has been used to perform nonlinear analyses, demonstrating a good capability of reproducing the significant structural response features, including capacity curves and damage maps - while reducing computational effort by over 99%. This makes the simplified model particularly suitable for large-scale parametric analyses aimed at uncertainty management. XX ANIDIS Conference Efficient nonlinear seismic modelling of masonry arch bridges using calibrated simplified FE models Giuseppina Uva a, *, Luigi Salvatore Rainone a , Luis Martins da Silva b , Siro Casolo b a DICATECH Department, Polytechnic University of Bari, Bari, Italy b DABC, Politecnico di Milano, Milano, Italy

* Corresponding author. E-mail address: giuseppina.uva@poliba.it

2452-3216 © 2025 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of XX ANIDIS Conference organizers 10.1016/j.prostr.2025.12.134