PSI - Issue 78

Mariano Di Domenico et al. / Procedia Structural Integrity 78 (2026) 1237–1244

1244

Di Domenico, M., De Risi, M.T., Manfredi, V., Terrenzi, M., Camata, G., et al., 2023. "Modelling and seismic response analysis of Italian pre code and low - code reinforced concrete buildings. Part II: Infilled frames." J. Earthq. Eng. 27(6), 1534–1564. Di Domenico, M., Ricci, P., Verderame, G.M., 2021. "Floor spectra for bare and infilled reinforced concrete frames designed according to Eurocodes." Earthq. Eng. Struct. Dyn. 50, 3577–3601. Di Domenico, M., Ricci, P., Verderame, G.M., 2021. "Empirical calibration of hysteretic parameters for modeling the seismic response of RC columns with plain bars." Eng. Struct. 237, 112120. Domaneschi, M., Cimellaro, G.P., Scutiero, G., 2019. "A simplified method to assess generation of seismic debris for masonry structures." Eng. Struct. 186, 306–320. FEMA, 2003. "HAZUS - MH MR - 1 technical manual." Federal Emergency Management Agency, Washington, D.C., USA. Garcia - Torres, S., Kahhat, R., Santa - Cruz, S., 2017. "Methodology to characterize and quantify debris generation in residential buildings after seismic events." Resour. Conserv. Recycl. 117, 151–159. Goretti, A., Sarli, V., 2006. "Road network and damaged buildings in urban areas: short and long - term interaction." Bull. Earthq. Eng. 4, 159– 175. Haselton, C.B., Liel, A.B., Taylor - Lange, S., Deierlein, G.G., 2008. "Beam - column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings." PEER Report No. 2007/03, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA. Hirokawa, N., Osaragi, T., 2016. "Earthquake disaster simulation system: integration of models for building collapse, road blockage, and fire spread." J. Disaster Res. 11(2), 175–187. Iervolino, I., Spillatura, A., Bazzurro, P., 2018. "Seismic reliability of code - conforming Italian buildings." J. Earthq. Eng. 22(sup2), 5–27. Jeon, J. - S., Lowes, L.N., DesRoches, R., Brilakis, I., 2015. "Fragility curves for non - ductile reinforced concrete frames that exhibit different component response mechanisms." Eng. Struct. 85, 127–143. Liberatore, L., Noto, F., Mollaioli, F., Franchin, P., 2018. "In - plane response of masonry infill walls: Comprehensive experimentally - based equivalent strut model for deterministic and probabilistic analysis." Eng. Struct. 167, 533–548. Lin, F., Zu, Z., Ren, X., 2024. "Collapsed debris distribution of RC frame structures under earthquake excitation and secondary effects." In: Proc. 6th Int. Conf. on Smart Monitoring, Assessment and Rehabilitation of Civil Structures , Lect. Notes Civ. Eng. , 259. Lu, X., Yang, Z., Chear, C., Guan, H., 2020. "Experimental study on earthquake - induced falling debris of exterior infill walls and its impact to pedestrian evacuation." Int. J. Disaster Risk Reduct. 43. Mays, G.C., Hetherington, J.G., Rose, T.A., 1998. "Resistance - deflection functions for concrete wall panels with openings." J. Struct. Eng. 124(5), 579–587. McKenna, F., Scott, M., Fenves, G., 2010. "Nonlinear finite element analysis software architecture using object composition." J. Comput. Civ. Eng. 24(1), 95–107. MIT – Ministero delle Infrastrutture e dei Trasporti, 2018. "Aggiornamento delle Norme Tecniche per le Costruzioni." Gazz. Uff. Repubblica Italiana n.42, 20 febbraio 2018. (in Italian) Ricci, P., Di Domenico, M., Verderame, G.M., 2018a. "Empirical - based out - of - plane URM infill wall model accounting for the interaction with in - plane demand." Earthq. Eng. Struct. Dyn. 47(3), 802–827. Ricci, P., Di Domenico, M., Verderame, G.M., 2018b. "Experimental investigation of the influence of slenderness ratio and of the in - plane/out - of plane interaction on the out - of - plane strength of URM infill walls." Constr. Build. Mater. 191, 505–522. Ricci, P., Di Domenico, M., Verderame, G.M., 2022. "Effects of the in - plane/out - of - plane interaction in URM infills on the seismic performance of RC buildings designed to Eurocodes." J. Earthq. Eng. 26(3), 1595–1629. Sassun, K., Sullivan, T.J., Morandi, P., Cardone, D., 2016. "Characterising the in - plane seismic performance of infill masonry." Bull. N.Z. Soc. Earthq. Eng. 49(1), 98–115. TCSM – Technical Commission for Seismic Microzonation, 2014. "Manuale per l’analisi della Condizione Limite per l’Emergenza (CLE) dell’insediamento urbano." Roma, Italy, 278 pp. (in Italian) Verderame, G.M., Manfredi, G., Frunzio, G., 2001. "Le proprietà meccaniche dei calcestruzzi impiegati nelle strutture in cemento armato realizzate negli anni ‘60." In: Proc. 10th Italian Conf. on Seismic Engineering (ANIDIS 2001) , Potenza - Matera, Italy. (in Italian) Verderame, G.M., Ricci, P., Esposito, M., Manfredi, G., 2012. "STIL v1.0 – Software per la caratterizzazione delle proprietà meccaniche degli acciai da c.a. tra il 1950 e il 2000." ReLUIS, Naples, Italy.