PSI - Issue 78

Martina Sciomenta et al. / Procedia Structural Integrity 78 (2026) 253–260

260

References

Aicher S, Münzer A, Hezel J, et al. (2023) Head pull-through capacity of load-bearing timber screws – Influential parameters and shortcomings of European test procedure. Wood Material Science & Engineering 18(4). Taylor & Francis: 1505–1520. British Standards Institute (2001) EN 26891:1991- Timber Structures - Joints Made With Mechanical Fasteners - General Principles For The Determination Of Strength And Deformation Characteristics. Brunetti M, Nocetti M and Burato P (2013) Strength properties of chestnut structural timber with wane. Advanced Materials Research 778(October): 377–384. CEN (2011) EN 1995-1-1:2004 - Eurocode 5: Design of timber structures - part 1-1: Common rules and rules for buildings. (CEN) EC for S (1991) EN 26891 - Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics, European Committee for Standardization (CEN),. Brussels, Belgium. CEN (European Committee for Standardization) (1991) EN 26891:1991 - Timber Structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983). Structural Engineer . CEN (European Committee for Standardization) (2016) EN 14358:2016. Timber structures – Calculation and verification of characteristic values. De Santis Y, Sciomenta M, Spera L, et al. (2022) Effect of Interlayer and Inclined Screw Arrangements on the Load-Bearing Capacity of Timber Concrete Composite Connections. Buildings 12(12). European Committee for Standardization (CEN) (2005) EN 12512:2001 Timber structures - test methods - cyclic testing of joints made with mechanical fasteners. Loss C, Piazza M and Zandonini R (2016) Connections for steel–timber hybrid prefabricated buildings. Part I: Experimental tests. Construction and Building Materials 122: 781–795. Martins C, Ferreira C, Monteiro SRS, et al. (2025) Mechanical properties of sweet chestnut sawn wood and glulam performance. European Journal of Wood and Wood Products 83(3): 112. Ministero delle Infrastrutture e dei Trasporti. (2018). D.M 17 gennaio 2018 “Aggiornamento delle Norme tecniche per le Costruzioni”. Supplemento Ordinario Alla “Gazzetta Ufficiale„ n. 42 Del 20 Febbraio 2018- Serie Generale . Nero R, Christopher P and Ngo T (2025) Residential long-span timber floor typologies: a comprehensive performance assessment and opportunities for value adding to plantation hardwood. Wood Material Science and Engineering 20(2): 338–349. Pramreiter M and Grabner M (2023) The Utilization of European Beech Wood (Fagus sylvatica L.) in Europe. Forests 14(7). Schiro G, Giongo I, Sebastian W, et al. (2018) Testing of timber-to-timber screw-connections in hybrid configurations. Construction and Building Materials 171: 170–186. Sciomenta M, Spera L, Peditto A, et al. (2022) Mechanical characterization of homogeneous and hybrid beech-Corsican pine glue-laminated timber beams. Engineering Structures 264. Spera L, Sciomenta M, Bedon C, et al. (2024) Out-of-Plane Strengthening of Existing Timber Floors with Cross Laminated Timber Panels Made of Short Supply Chain Beech. Buildings 14(3). Tomei V, Sciomenta M and Sandoli A (2023) the Use of Structural Timber in Europe: an Overview on Recent Developments. In: COMPDYN Proceedings , 2023.