PSI - Issue 78

Giacomo Iovane et al. / Procedia Structural Integrity 78 (2026) 521–527

526

References

Andreolli, M., Piazza, M., Tomasi, R., Zandonin, R., 2011. Ductile moment-resistant steel-timber connections. In: Structures and Buildings, 164, SB2, 65-78. Beltran, G.- G., 2016. Local energy dissipators for skeleton structures. In: World Conference on Timber Engineering (WCTE), 2016. Faggiano, B., Iovane, G., Tartaglia, R., Ciccone, G., Landolfo, R., Mazzolani, F.,M., Andreolli, M., Tomasi, R., Piazza, M., 2019. Numerical simulation of monotonic tests on beam-column timber joints equipped with steel links for heavy timber seismic resistant MRF. In: International Conference on Numerical Analysis and Applied Mathematics 2018, ICNAAM 2018. ISBN:978-073541854-7. DOI:10.1063/1.5114268. Gohlich, R., Erochko, J., 2016. Development of a heavy timber moment-resisting frame with ductile steel links. In: World Conference on Timber Engineering (WCTE). He, M., Zhao, Y., Ma, R., 2016. Experimental investigation on lateral performance of pre-stressed tube bolted connection with high initial stiffness. In: Advances in Structural Engineering, Vol. 19(5) 762–776, 2016. DOI: 10.1177/1369433215622863. He, M.-j., Liu, H.-f., 2015. Comparison of glulam post-to-beam connections reinforced by two different dowel-type fasteners. In: Construction and Building Materials, 99–108, Elsevier Ltd. Iovane, G., Noviello, C., Mazzolani, F.,M., Landolfo, R., Faggiano, B., 2023a. A proposal for the mechanical classification of beam-to-column joints for timber structures . In: World Conference of Timber Engineering (WCTE). https://dx.doi.org/10.52202/069179-0390. Iovane, G., Rodrigues, L., Branco, J., Faggiano, B., 2023b. Monotonic tests on beam-to-column joint with steel link for timber seismic resistant structures. In: World Conference of Timber Engineering (WCTE). https://doi.org/10.52202/069179-0288. Jayasekara, L.,M.,M.,B., Foster, R., M., 2023. Numerical modelling of mass timber beam-column connections . In: World Conference of Timber Engineering (WCTE). https://doi.org/10.52202/069179-0372. Johanides, M., Kubíncová, L., M., Mikolášek, D., Lokaj, A., Sucharda, O., Mynarˇcík, P., 2021. Analysis of Rotational Stiffne ss of the Timber Frame Connection . In: Sustainability 2021, 13, 156, MDPI. https://dx.doi.org/10.3390/su13010156. Kang, S., Xiong, G., Feng, S., Zhu, H., Zhou, S., 2022. Behaviour of glulam timber frames with different beam-column connections and braces under reversed cyclic loads. In: Journal of Building Engineering 49 (2022) 104031, Elsevier. https://doi.org/10.1016/j.jobe.2022.104031. Kasal, B., Asce, M., Guindos, P., Polocoser, T., Asce, S.M., Heiduschke, A., Urushadze, S., Pospisil, S., 2014. Heavy laminates timber frames with rigid three-dimensional beam-to-column connections. In: Journal of Performance of Constructed Facilities, 28(6): A4014014. Kasal, B., Heiduschke, A., Pospisil, S., Urushadze, S., 2010. Shake table tests of a three-story spatial timber frame with moment connections. In: World Conference on Timber Engineering (WCTE). Li, Z., Wang, Y., Liu, X., Ou, J., Gan, Z., He, M., 2024. Mechanical performance of glulam beam-to-column joints with geometrical modulus: Experimental investigation and analytical approach. In: Journal of Building Engineering 84 (2024) 108437, Elsevier. https://doi.org/10.1016/j.jobe.2024.108437. Liu, Y., Xiong, H., 2018. Lateral performance of a semi-rigid timber frame structure: theoretical analysis and experimental study . In: Journal of Wood Science (2018) 64:591-600, Springer. https://doi.org/10.1007/s10086-018-1727-7. Madland, H., Fischer, E., Sinha, A., 2024. Monotonic Testing of Glue-Laminated Beam-to-Column Connections . In: Journal of Structural Engineering, 2023, 149(5): 04023039, ASCE. Masaeli, M., Gilbert, B.,P., Karampour, H., Underhill, I.,D., Gunalan, S., 2020. Scaling effect on the moment and shear responses of three types of beam-tocolumn connectors used in mass timber buildings. In: Engineering Structures 208 (2020) 110329, Elsevier. https://doi.org/10.1016/j.engstruct.2020.110329. Nakatani, M., Mori, T., Komatsu, K., 2012 Development of cross embedded joint using lagscrewbolt. In: World Conference on Timber Engineering (WCTE). Polastri, A. 2010. Caratterizzazione del comportamento di giunti sem-irigidi per strutture lignee in zona sismica. PhD Thesis, Supervisor: Prof. Maurizio Piazza, Prof. Ian Smith. University of Trento, University of Brescia, University of Padova, University of Trieste, University of Udine, University of Venezia. Rahmzadeh, A., Iqbal, A., 2021. Numerical modelling and analysis of post-tensioned timber beam-column joint . In: Engineering Structures, 245 (2021) 112762, Elsevier Ltd. https://doi.org/10.1016/j.engstruct.2021.112762. Salem, S., 2016. Experimental testing of steel-wood-steel glulam frame bolted connections. In: World Conference on Timber Engineering. Salem, S., Petrycki, A., 2016. Experimental testing of wood-steel-wood moment resisting bolted connections. In: World Conference on Timber Engineering (WCTE). Sun, X., Luo, L., Sun, S., Luo, J., Ou, J., 2024. An experimental and numerical study on the rotational behavior of bolted glulam beam-to-column connections reinforced by double U-shaped welded steel sections . In: Engineering Structures 301 (2024) 117315, Elsevier. https://doi.org/10.1016/j.engstruct.2023.117315. Vilguts, A., Stamatopoulos, H., Malo, K.,A., 2024. Experimental and analytical evaluation of semi-rigid timber connection with screwed-in threaded rods and steel coupling part . In: Journal of Building Engineering 94 (2024) 109923, Elsevier Ltd. https://doi.org/10.1016/j.jobe.2024.109923. Wang, M., Song, X., Gu, X., Zhang, Y., Luo, L., 2014. Rotational Behavior of Bolted Beam-to-Column Connections with Locally Cross Laminated Glulam. In: Journal of Structural Engineering, ASCE. Wang, X., T., Zhu, E.,C., Niu, S., Wang, H.,J., 2021. Analysis and test of stiffness of bolted connections in timber structures . In: Construction and Building Materials 303 (2021) 124495, Elsevier. https://doi.org/10.1016/j.conbuildmat.2021.124495.