PSI - Issue 78

Beatrice Travasoni et al. / Procedia Structural Integrity 78 (2026) 1111–1118

1118

References

Baldessari, C., 2010. In-plane behaviour of differently refurbished timber floors. PhD Thesis, University of Trento, Trento, Italy. Calvi, G. M., Magenes, G., 1994. Experimental research on response of URM building systems. Proceedings of the US–Italy Workshop on Guidelines for Seismic Evaluation and Rehabilitation of Unreinforced Masonry Buildings, pp. 41–57. CEN (European Committee for Standardization), 2004. Eurocode 5. Design of timber structures – Part 1-1: General – Common rules and rules for buildings, EN 1995-1-1:2004, Brussels, 2004. CEN (European Committee for Standardization), 2005. Eurocode 8. Design of structures for earthquake resistance – Part 3: Assessment and retrofitting of buildings, EN 1998-3-1:2005, Brussels, 2005. Foraboschi, P., 2023. Shear strength of the anchor embedded into masonry. Engineering Structures, 294, 116749. Guerrini, G., Salvatori, C., Senaldi, I., Penna, A., 2021. Experimental and numerical assessment of seismic retrofit solutions for stone masonry buildings. Geosciences, 11(6), 230. Karki, D., Al-Hunaity, S., Far, H., Saleh, A., 2022. Composite connections between CFS beams and plywood panels for flooring systems: Testing and analysis. Structures, 40, pp. 771–785. Lagomarsino, S., 2015. Seismic assessment of rocking masonry structures. Bulletin of Earthquake Engineering, 13, pp. 97–128. Magenes, G., Calvi, G., Kingsley, G. R., 1995. Seismic testing of a full-scale, two-story masonry building: test procedure and measured experimental response. Experimental and Numerical Investigation on a Brick Masonry Building Prototype – Numerical Prediction of the Experiment, Report 3.0, Roma. Mirra, M., 2022. Seismic behaviour of masonry buildings with timber diaphragms. PhD Thesis, Delft University of Technology. Tselios, I., Vintzileou, E., Karagiannaki, D., Christidis, K., Palieraki, V., Welz, G., 2023. Anchors to solid clay brick masonry in tension: behavior under monotonic and repeated loading for constant embedment depth. Applied Sciences, 13(23), 12917.