PSI - Issue 78

Marco Terrenzi et al. / Procedia Structural Integrity 78 (2026) 418–425

425

References

Ambraseys, N., Smit, P., Douglas, J., Margaris, B., Sigbjo¨rnsson, R., Olafsson, S., Suhadolc, P., Costa, G., et al., 2004. Internet site for european strong-motion data. Bollettino di geofisica teorica ed applicata 45, 113–129. Barbagallo, F., Bosco, M., Marino, E.M., Rossi, P.P., 2020. On the fibre modelling of beams in rc framed buildings with rigid diaphragm. Bulletin of earthquake engineering 18, 189–210. Barbagallo, F., Di Domenico, M., Terrenzi, M., Cantagallo, C., Marino, E.M., Ricci, P., Verderame, G.M., Camata, G., Spacone, E., 2023. Influence of the modelling approach on the seismic assessment of rc structures by nonlinear static analyses. Soil Dynamics and Earthquake Engineering 172, 107970. Basaglia, A., Cianchino, G., Cocco, G., Rapone, D., Terrenzi, M., Spacone, E., Brando, G., 2021. An automatic procedure for deriving building portfolios using the italian cartis online database, in: Structures, Elsevier. pp. 2974–2986. Cantagallo, C., Terrenzi, M., Barbagallo, F., Di Domenico, M., Ricci, P., Camata, G., Spacone, E., Marino, E.M., Verderame, G.M., 2023. E ff ects of the extended n2 method on non-linear static procedures of reinforced concrete frame structures. Soil Dynamics and Earthquake Engineering 173, 108144. Cardone, D., Perrone, G., 2015. Developing fragility curves and loss functions for masonry infill walls. Earthquakes and Structures 9, 257–279. Charney, F.A., 2008. Unintended consequences of modeling damping in structures. Journal of structural engineering 134, 581–592. Chopra, A.K., McKenna, F., 2016. Modeling viscous damping in nonlinear response history analysis of buildings for earthquake excitation. Earthquake Engineering & Structural Dynamics 45, 193–211. Decanini, L., Fantin, G., 1987. Modelos simplificados de la mamposter´ıa incluida en porticos. Caracteristicas de sti ff nessy resistencia lateral en estado limite. Jornadas Argentinas de Ingenier´ıa Estructural 2, 817–836. Decanini, L.D., Liberatore, L., Mollaioli, F., 2014. Strength and sti ff ness reduction factors for infilled frames with openings. Earthquake Engineer ing and Engineering Vibration 13, 437–454. ISTAT (2011), . Edifici residenziali. ttp://daticensimentopopolazione.istat.it/Index.aspx?DataSetCode=DI-CA_EDIFICI1 (ac cessed September 14, 2023), in Italian. Kent, D.C., Park, R., 1971. Flexural members with confined concrete. Journal of the Structural Division . Lanzano, G., Sgobba, S., Luzi, L., Puglia, R., Pacor, F., Felicetta, C., DAmico, M., Cotton, F., Bindi, D., 2019. The pan-european engineering strong motion (esm) flatfile: compilation criteria and data statistics. Bulletin of Earthquake Engineering 17, 561–582. Mazzoni, S., McKenna, F., Scott, M.H., Fenves, G.L., 2006. The Open System for Earthquake Engineering Simulation (OpenSEES) User Command-Language Manual . Noh, N.M., Liberatore, L., Mollaioli, F., Tesfamariam, S., 2017. Modelling of masonry infilled rc frames subjected to cyclic loads: State of the art review and modelling with opensees. Engineering Structures 150, 599–621. Pancottini, L., Terrenzi, M., Spacone, E., 2025. E ff ects of staircase modeling on assessing the seismic response of gravitational rc building, in: Dindar, A.A., Benavent-Climent, A., Mollaioli, F., Varum, H. (Eds.), Energy-Based Seismic Engineering, Springer Nature Switzerland, Cham. pp. 433–441. Petracca, M., Candeloro, F., Camata, G., 2017. Stko user manual. asdea software technology, pescara, italy (2017). Pinto, M., 1973. Method of analysis for cyclically loaded rc plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending, in: Proc. of IABSE symposium on resistance and ultimate deformability of structures acted on by well defined repeated loads, pp. 15–22. Sassun, K., Sullivan, T.J., Morandi, P., Cardone, D., 2016. Characterising the in-plane seismic performance of infill masonry. Bulletin of the New Zealand Society for Earthquake Engineering 49. Scott, M.H., Fenves, G.L., 2006. Plastic hinge integration methods for force-based beam–column elements. Journal of Structural Engineering 132, 244–252. Scott, Park R., P.M.J.N., 1982. Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates. ACI Structural Journal 79, 13–27. Spacone, E., Filippou, F., Taucer, F., 1996a. Fibre beam-column model for non-linear analysis of r / c frames: Part i. formulation. Earthquake engineering and structural dynamics 25, 711–726. Spacone, E., Filippou, F., Taucer, F., 1996b. Fibre beam-column model for non-linear analysis of r / c frames: Part ii. applications. Earthquake engineering and structural dynamics 25, 727–742. Terrenzi, M., Cantagallo, C., Camata, G., Spacone, E., 2024. E ff ect of damping in nonlinear dynamic analysis of existing reinforced concrete buildings, in: 18th World Conference on Earthquake Engineering, WCEE2024. Terrenzi, M., Spacone, E., 2025. Nonlinear seismic analysis of rc structures: Influence of material properties on hysteretic damping, in: 10th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN2025. Terrenzi, M., Spacone, E., Camata, G., 2018. Collapse limit state definition for seismic assessment of code-conforming rc buildings. International Journal of Advanced Structural Engineering 10, 325–337. Terrenzi, M., Spacone, E., Camata, G., 2020. Comparison between phenomenological and fiber-section non-linear models. Frontiers in Built Environment 6, 38. Terrenzi, M., Spacone, E., Camata, G., 2022. Engineering demand parameters for the definition of the collapse limit state for code-conforming reinforced concrete buildings. Engineering Structures 266, 114612. Wilson, E., Penzien, J., 1972. Evaluation of orthogonal damping matrices. International Journal for numerical methods in engineering 4, 5–10.