Issue 77

S. Spiller et alii, Fracture and Structural Integrity, 77 (2026) 386-404; DOI: 10.3221/IGF-ESIS.77.22

R EFERENCES [1] Bankapalli, N.K., Gupta, V., Saxena, P., Bajpai, A., Lahoda, C., Polte, J. (2023). Filament fabrication and subsequent additive manufacturing, debinding, and sintering for extrusion-based metal additive manufacturing and their applications: A review, Compos. Part B Eng., 264, p. 110915. DOI: https://doi.org/10.1016/j.compositesb.2023.110915. [2] Costa, J.M., Sequeiros, E.W., Vieira, M.F. (2023). Fused Filament Fabrication for Metallic Materials: A Brief Review, Materials, 16(24), p. 7505. DOI: https://doi.org/10.3390/ma16247505. [3] Alt ı parmak, S.C., Xiao, B. (2021). A market assessment of additive manufacturing potential for the aerospace industry, J. Manuf. Process., 68, pp. 728–738. DOI: https://doi.org/10.1016/j.jmapro.2021.05.072. [4] Spiller, S., Berto, F., Razavi, N. (2022). Mechanical behavior of Material Extrusion Additive Manufactured components: an overview, Procedia Struct. Integr., 41, pp. 158–174. DOI: https://doi.org/10.1016/j.prostr.2022.05.018. [5] Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives, Materials, 11(5), p. 840. DOI: https://doi.org/10.3390/ma11050840. [6] Galati, M., Minetola, P. (2019). Analysis of Density, Roughness, and Accuracy of the Atomic Diffusion Additive Manufacturing (ADAM) Process for Metal Parts, Materials, 12(24), p. 4122. DOI: https://doi.org/10.3390/ma12244122. [7] Henry, T.C., Morales, M.A., Cole, D.P., Shumeyko, C.M., Riddick, J.C. (2021). Mechanical behavior of 17-4 PH stainless steel processed by atomic diffusion additive manufacturing, Int. J. Adv. Manuf. Technol., 114(7–8), pp. 2103–2114. DOI: https://doi.org/10.1007/s00170-021-06785-1. [8] Suwanpreecha, C., Seensattayawong, P., Vadhanakovint, V., Manonukul, A. (2021). Influence of Specimen Layout on 17-4PH (AISI 630) Alloys Fabricated by Low-Cost Additive Manufacturing, Metall. Mater. Trans. A, 52(5), pp. 1999– 2009. DOI: https://doi.org/10.1007/s11661-021-06211-x. [9] Alkindi, T., Alyammahi, M., Susantyoko, R.A., Atatreh, S. (2021). The effect of varying specimens’ printing angles to the bed surface on the tensile strength of 3D-printed 17-4PH stainless-steels via metal FFF additive manufacturing, MRS Commun., 11(3), pp. 310–316. DOI: https://doi.org/10.1557/s43579-021-00040-0. [10] Abe, Y., Kurose, T., Santos, M., Kanaya, Y., Ishigami, A., Tanaka, S., Ito, H. (2021). Effect of Layer Directions on Internal Structures and Tensile Properties of 17-4PH Stainless Steel Parts Fabricated by Fused Deposition of Metals, Materials, 14(2), p. 243. DOI: https://doi.org/10.3390/ma14020243. [11] Lawrence, B.D., Henry, T.C., Phillips, F., Riddick, J., Kudzal, A. (2023). High-cycle tension-tension fatigue performance of additively manufactured 17–4 PH stainless steel, Int. J. Adv. Manuf. Technol., 126(1–2), pp. 777–786. DOI: https://doi.org/10.1007/s00170-023-11146-1. [12] Rodriguez, J., Zuriarrain, A., Madariaga, A., Arrazola, P.J., Dominguez, E., Fraile, I., Soler, D. (2023). Mechanical Properties and Fatigue Performance of 17-4 PH Stainless Steel Manufactured by Atomic Diffusion Additive Manufacturing Technology, J. Manuf. Mater. Process., 7(5), p. 172. DOI: https://doi.org/10.3390/jmmp7050172. [13] Naim, M., Chemkhi, M., Kauffmann, J., Alhussein, A. (2024). Taguchi DoE analysis and characterization of 17-4 PH stainless steel parts produced by material extrusion (MEX) process, Adv. Ind. Manuf. Eng., 8, p. 100138. DOI: https://doi.org/10.1016/j.aime.2024.100138. [14] Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C., Holzer, C. (2019). Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing, Mater. Lett., 248, pp. 165–168. DOI: https://doi.org/10.1016/j.matlet.2019.04.024. [15] Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip, ASTM A693-24, 2024. (n.d.). [16] Pellegrini, A., Lavecchia, F., Guerra, M.G., Galantucci, L.M. (2023). Influence of aging treatments on 17–4 PH stainless steel parts realized using material extrusion additive manufacturing technologies, Int. J. Adv. Manuf. Technol., 126(1– 2), pp. 163–178. DOI: https://doi.org/10.1007/s00170-023-11136-3. [17] Local characterization of stainless steel 17-4PH produced by material extrusion additive manufacturing: Influence of the post-treatment, Mater. Sci. Eng. A, 880, p. 145371. DOI: https://doi.org/10.1016/j.msea.2023.145371. [18] Kedziora, S., Decker, T., Museyibov, E., Morbach, J., Hohmann, S., Huwer, A., Wahl, M. (2022). Strength Properties of 316L and 17-4 PH Stainless Steel Produced with Additive Manufacturing, Materials, 15(18), p. 6278. DOI: https://doi.org/10.3390/ma15186278. [19] Ghadimi, H., Jirandehi, A.P., Nemati, S., Ding, H., Garbie, A., Raush, J., Zeng, C., Guo, S. (2023). Effects of Printing Layer Orientation on the High-Frequency Bending-Fatigue Life and Tensile Strength of Additively Manufactured 17-4 PH Stainless Steel, Materials, 16(2), p. 469. DOI: https://doi.org/10.3390/ma16020469.

402