Issue 77

N. A. Alang et al., Fracture and Structural Integrity, 77 (2026) 340-361; DOI: 10.3221/IGF-ESIS.77.20

DOI: https://doi.org/10.1016/j.matchar.2020.110514. [16] Woo, W., Jeong, J.S., Kim, D.-K., Lee, C.M., Choi, S.-H., Suh, J.-Y., Lee, S.Y., Harjo, S., Kawasaki, T. (2020). Stacking Fault Energy Analyses of Additively Manufactured Stainless Steel 316L and CrCoNi Medium Entropy Alloy Using In Situ Neutron Diffraction, Sci. Rep., 10(1), pp. 1350, DOI: https://doi.org/10.1038/s41598-020-58273-3. [17] Ferdous, I.U., Alang, N.A., Alias, J., Nadzir, S.M. (2021). Numerical Prediction of Creep Rupture Life of Ex-Service and As-Received Grade 91 Steel at 873 K, Int. J. Automot. Mech. Eng., 18(3), pp. 8845–8858, DOI: https://doi.org/10.15282/ijame.18.3.2021.01.0678. [18] Oliveira, D.M., San Marchi, C.W., Medlin, D.L., Gibeling, J.C. (2025). Hydrogen influences thermal activation parameters for dislocation glide during low cycle fatigue of 316L stainless steel, Mater. Sci. Eng. A, 932, pp. 148243, DOI: https://doi.org/10.1016/j.msea.2025.148243. [19] Cheng, Z., Sun, J., Tai, P., Zhang, L., Wei, Y., Chang, H., Thuku, R., Gichuhi, K.M. (2021). Comparative Study between Small Punch Tests and Finite Element Analysis of Miniature Steel Specimens, J. Mater. Eng. Perform., 30(12), pp. 9094– 9107, DOI: https://doi.org/10.1007/S11665-021-06098-0. [20] ASTM International. (2024). Standard test methods for tension testing of metallic materials (ASTM E8/E8M-24). DOI: https://doi.org/10.1520/E0008_E0008M-24 [21] ASTM International. (2020). Standard test method for small punch testing of metallic materials (ASTM E3205-20). DOI: https://doi.org/10.1520/E3205-20 [22] Ul Ferdous, I., Alang, N.A., Alias, J., Ab Razak, N., Abu Samah, Z. (2022). Evaluation of Yield Strength Under Small Punch Loading with Different Specimen Thicknesses, J. Adv. Res. Appl. Sci. Eng. Technol., DOI: https://doi.org/10.37934/cfdl.XX.X.XX. [23] García, T.E., Rodríguez, C., Belzunce, F.J., Suárez, C. (2014). Estimation of the mechanical properties of metallic materials by means of the small punch test, J. Alloys Compd., 582, pp. 708–717, DOI: https://doi.org/10.1016/j.jallcom.2013.08.009. [24] Moreno, M.F. (2018). Effects of thickness specimen on the evaluation of relationship between tensile properties and small punch testing parameters in metallic materials, Mater. Des., 157, pp. 512–522, DOI: https://doi.org/10.1016/j.matdes.2018.07.065. [25] Peng, J., Vijayanand, V.D., Knowles, D., Truman, C., Mostafavi, M. (2021). The sensitivity ranking of ductile material mechanical properties, geometrical factors, friction coefficients and damage parameters for small punch test, Int. J. Press. Vessel. Pip., 193, pp. 104468, DOI: https://doi.org/10.1016/j.ijpvp.2021.104468. [26] Çakan, B.G., Soyarslan, C., Bargmann, S., Hähner, P. (2017). Experimental and Computational Study of Ductile Fracture in Small Punch Tests, Mater. , 10(10), pp. 1185, DOI: https://doi.org/10.3390/MA10101185. [27] Pandey, C., Mahapatra, M.M., Kumar, P., Saini, N. (2018). Some studies on P91 steel and their weldments, J. Alloys Compd., 743, pp. 332–364, DOI: https://doi.org/10.1016/J.JALLCOM.2018.01.120. [28] Li, H., Chen, H., Al-Abedy, H.K., Sun, W. (2020). Study on the Fracture Mechanism of the P91 Steel During Small Punch Tensile Testing, , pp. 106–111, DOI: https://doi.org/10.1007/978-3-030-47883-4_19. [29] Nowik, K., Oksiuta, Z. (2022). Experimental and Numerical Small Punch Tests of the 14Cr ODS Ferritic Steel, Acta Mech. Autom., 16(3), pp. 225–232, DOI: https://doi.org/10.2478/ama-2022-0027. [30] Li, Q., Wang, X., Zhao, L., Xu, L., Han, Y. (2023). Validation and improvement in metallic material tensile models for small punch tests, J. Mater. Sci., 58(26), pp. 10832–10852, DOI: https://doi.org/10.1007/s10853-023-08695-x. [31] Pandit, S.C., Alang, N.A., Ferdous, I.U., Alias, J.B., Hassan, M.F. Bin., Ahmad, A.H. Bin. (2025). Evaluation of thinning behaviour under the influence of plastic hardening and surface friction during small punch test, Fract. Struct. Integr., 19(72), pp. 46–61, DOI: https://doi.org/10.3221/IGF-ESIS.72.05. [32] Alang, N.A., Ferdous, I.U., Alias, J., Razak, N.A.A., Ahmad, A.H. (2024). On the Influence of Clamping Force and Contact Friction in Small Punch Test, Lect. Notes Mech. Eng., , pp. 175–182, DOI: https://doi.org/10.1007/978-981-97-4806-8_15. [33] Shaik, A.R., Pandey, A.V., Karthik, V., Kolhatkar, A., Abhishek, G., Divakar, R. (2024). Application of Digital Image Correlation to Small Punch Test for Determination of Stress–Strain Properties, Trans. Indian Inst. Met., 77(11), pp. 3879–3892, DOI: https://doi.org/10.1007/s12666-024-03442-5. [34] Zhang, K., Liu, X., Fan, P., Zhu, L., Wang, K., Wang, L., Zhao, C. (2023). Characterization of geometrically necessary dislocation evolution during creep of P91 steel using electron backscatter diffraction, Mater. Charact., 195, pp. 112501, DOI: https://doi.org/10.1016/j.matchar.2022.112501. [35] Zhang, J., Yu, Q., Tian, J., Yang, S., Zuo, X., Li, Y., Chen, N., Rong, Y., Ritchie, R.O., Lu, J. (2025). Toughness enhancement by massive dislocation absorption at the crack front, Proc. Natl. Acad. Sci., 122(37), DOI: https://doi.org/10.1073/pnas.2511830122.

361