Issue 77

N. S. Kondratev et alii, Fracture and Structural Integrity, 77 (2026) 230-246; DOI: 10.3221/IGF-ESIS.77.14

[18] Trusov, P., Kondratev, N., Baldin, M., Bezverkhy, D. (2023). A Multilevel Physically Based Model of Recrystallization: Analysis of the Influence of Subgrain Coalescence at Grain Boundaries on the Formation of Recrystallization Nuclei in Metals, Materials, 16(7), p. 2810. DOI: https://doi.org/10.3390/ma16072810. [19] Trusov, P., Kondratev, N., Podsedertsev, A. (2022). Description of Dynamic Recrystallization by Means of An Advanced Statistical Multilevel Model: Grain Structure Evolution Analysis, Crystals, 12(5), p. 653. DOI: https://doi.org/10.3390/cryst12050653. [20] Madej, L., Sitko, M. (2023). Computationally Efficient Cellular Automata ‐ Based Full ‐ Field Models of Static Recrystallization: A Perspective Review, Steel Research Int., 94(3), p. 2200657. DOI: https://doi.org/10.1002/srin.202200657. [21] Khajezade, A., Poole, W.J., Greenwood, M., Militzer, M. (2024). Large-Scale Multi-Phase-Field Simulation of 2D Subgrain Growth, Metals, 14(5), p. 584. DOI: https://doi.org/10.3390/met14050584. [22] Trusov, P., Kondratev, N., Podsedertsev, A. (2023). Grain Structure Rearrangement by Means the Advanced Statistical Model Modified for Describing Dynamic Recrystallization, Metals, 13(1), p. 113. DOI: https://doi.org/10.3390/met13010113. [23] Quey, R., Renversade, L. (2018). Optimal polyhedral description of 3D polycrystals: Method and application to statistical and synchrotron X-ray diffraction data, Computer Methods in Applied Mechanics and Engineering, 330, pp. 308–333. DOI: https://doi.org/10.1016/j.cma.2017.10.029. [24] Furu, T., Ørsund, R., Nes, E. (1995). Subgrain growth in heavily deformed aluminium—experimental investigation and modelling treatment, Acta Metallurgica et Materialia, 43(6), pp. 2209–2232. DOI: https://doi.org/10.1016/0956-7151(94)00410-2. [25] Knudsen, T., Cao, W.Q., Godfrey, A., Liu, Q., Hansen, N. (2008). Stored Energy in Nickel Cold Rolled to Large Strains, Measured by Calorimetry and Evaluated from the Microstructure, Metall Mater Trans A, 39(2), pp. 430–440. DOI: https://doi.org/10.1007/s11661-007-9421-1. [26] Hamdi, H., Abedi, H.R. (2024). Thermal stability of Ni-based superalloys fabricated through additive manufacturing: A review, Journal of Materials Research and Technology, 30, pp. 4424–4476. DOI: https://doi.org/10.1016/j.jmrt.2024.04.161. [27] Read, W.T., Shockley, W. (1950). Dislocation Models of Crystal Grain Boundaries, Phys. Rev., 78(3), pp. 275–289. DOI: https://doi.org/10.1103/physrev.78.275. [28] Li, Z., Wang, D., Zhai, Y., Jiang, C., Zhou, L., Zhou, Z., Wang, H., Zhang, Z., Yan, L., Wang, L., Yu, G. (2024). Microstructure and microtexture evolution characteristics of a powder metallurgy Ni-based superalloy during static recrystallization, J. Iron Steel Res. Int., 31(9), pp. 2308–2325. DOI: https://doi.org/10.1007/s42243-024-01217-2. [29] Slama, C., Cizeron, G. (1997). Étude du comportement structural de l’alliage NC 19 Fe Nb (Inconel 718), J. Phys. III France, 7(3), pp. 665–688. DOI: https://doi.org/10.1051/jp3:1997148. [30] Song, Y.S., Lee, M.R., Kim, J.T. (2005). Effect of Grain Size for the Tensile Strength and the Low Cycle Fatigue at Elevated Temperature of Alloy 718 Cogged by Open Die Forging Press, Superalloys, 718, pp. 625–706. DOI: https://doi.org/10.7449/2005/superalloys_2005_539_549. [31] Han, Y., Deb, P., Chaturvedi, M.C. (1982). Coarsening behaviour of γ ″ - and γ′ -particles in Inconel alloy 718, Metal Science, 16(12), pp. 555–562. [32] Fournier, D., Pineau, A. (1977). Low cycle fatigue behavior of inconel 718 at 298 K and 823 K, Metall Trans A, 8(7), pp. 1095–1105. DOI: https://doi.org/10.1007/bf02667395. [33] Tseng, M.-W., Varma, S.K. (1992). Development of an empirical model for subgrain growth in Al-0.6Fe alloy, aluminium, copper and nickel during recovery, J Mater Sci, 27(20), pp. 5509–5515. DOI: https://doi.org/10.1007/bf00541613. [34] Ferry, M., Burhan, N. (2007). Structural and kinetic aspects of continuous grain coarsening in a fine-grained Al–0.3Sc alloy, Acta Materialia, 55(10), pp. 3479–3491. DOI: https://doi.org/10.1016/j.actamat.2007.01.047. [35] Pantleon, W., Hansen, N. (2001). Dislocation boundaries—the distribution function of disorientation angles, Acta Materialia, 49(8), pp. 1479–1493. DOI: https://doi.org/10.1016/s1359-6454(01)00027-1. [36] Zhang, H.W., Huang, X., Hansen, N. (2008). Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains, Acta Materialia, 56(19), pp. 5451–5465. DOI: https://doi.org/10.1016/j.actamat.2008.07.040. [37] Xu, H., Li, Y., Li, H., Wang, J., Liu, G., Song, Y. (2022). Constitutive Equation and Characterization of the Nickel Based Alloy 825, Metals, 12(9), p. 1496. DOI: https://doi.org/10.3390/met12091496. [38] Thomas, A., El-Wahabi, M., Cabrera, J.M., Prado, J.M. (2006). High temperature deformation of Inconel 718, Journal of Materials Processing Technology, 177(1–3), pp. 469–472. DOI: https://doi.org/10.1016/j.jmatprotec.2006.04.072.

245