PSI - Issue 77

V. Kroužecký et al. / Procedia Structural Integrity 77 (2026) 161 – 169 Vít Kroužecký / Structural Integrity Procedia 00 (2026) 000 – 000

169

9

References

Abu Zaki, M.S.S., Taib, M.T., Rahman, I.U., Abu Bakar, M.H., Ab Wahab, N.B., 2024. The examination of impact testing performed on SS-316L specimens fabricated utilizing selective laser melting 3D printer machine. Eng. Res. Express 6, 045576. https://doi.org/10.1088/2631-8695/ad9afa Aziz, U., McAfee, M., Manolakis, I., Timmons, N., Tormey, D., 2025. A Review of Optimization of Additively Manufactured 316/316L Stainless Steel Process Parameters, Post-Processing Strategies, and Defect Mitigation. Materials 18, 2870. https://doi.org/10.3390/ma18122870 Brytan, Z., 2017. Comparison of Vacuum Sintered and Selective Laser Melted Steel AISI 316L. Archives of Metallurgy and Materials 62, 2125 – 2131. https://doi.org/10.1515/amm-2017-0314 Casati, R., Lemke, J., Vedani, M., 2016. Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting. Journal of Materials Science & Technology 32, 738 – 744. https://doi.org/10.1016/j.jmst.2016.06.016 Chen, W., Yin, G., Feng, Z., Liao, X., 2018. Effect of Powder Feedstock on Microstructure and Mechanical Properties of the 316L Stainless Steel Fabricated by Selective Laser Melting. Metals 8, 729. https://doi.org/10.3390/met8090729 Choi, J.-P., Shin, G.-H., Lee, H.-S., Yang, D.-Y., Yang, S., Lee, C.-W., Brochu, M., Yu, J.-H., 2017. Evaluation of Powder Layer Density for the Selective Laser Melting (SLM) Process. Mater. Trans. 58, 294 – 297. https://doi.org/10.2320/matertrans.M2016364 Choiron, Moch.A., Purnowidodo, A., Zacoeb, A., Setyawan, G.E., Wirawan, W.A., Ariadi, Y., Rennie, A.E.W., Kurnianingtyas, D., 2025. Advanced computational techniques for predicting 3D printing distortion in selective laser melting processes of Aluminium AlSi10Mg. Mech. Eng. for Soc. and Ind. 5, 158 – 168. https://doi.org/10.31603/mesi.12581 Cui, C., Uhlenwinkel, V., Schulz, A., Zoch, H.-W., 2019. Austenitic Stainless Steel Powders with Increased Nitrogen Content for Laser Additive Manufacturing. Metals 10, 61. https://doi.org/10.3390/met10010061 Dejene, N.D., Lemu, H.G., 2023. Current Status and Challenges of Powder Bed Fusion-Based Metal Additive Manufacturing: Literature Review. Metals 13, 424. https://doi.org/10.3390/met13020424 Deng, Y., Mao, Z., Yang, N., Niu, X., Lu, X., 2020. Collaborative Optimization of Density and Surface Roughness of 316L Stainless Steel in Selective Laser Melting. Materials 13, 1601. https://doi.org/10.3390/ma13071601 Du, K., Li, S., Jie, S., Gao, X., Yu, Y., 2019. Effect of 316L stainless steel powder size distribution on selective laser melting process. J. Phys.: Conf. Ser. 1347, 012121. https://doi.org/10.1088/1742-6596/1347/1/012121 Faisal, S., Mulay, Dr. (Mrs. ) A., Sawant, Dr.M., 2022. Evaluation of SS 316L TPMS Lattice Structures Manufactured Using SLM Process, in: Proceedings of the International Conference on Industrial Engineering and Operations Management. Presented at the 2nd Indian International Conference on Industrial Engineering and Operations Management, IEOM Society International, Warangal, India, pp. 2368 – 2378. https://doi.org/10.46254/IN02.20220559 Fang, W., Wen, Q., Hu, J., Jiang, F., Hu, Z., Wu, X., Yang, J., Wang, X., 2025. Experimental Study on Surface Polishing of SLM-316L Stainless Steel via Laser Treatment and Mechanical Grinding. Micromachines 16, 634. https://doi.org/10.3390/mi16060634 Hajnys, J., Pagac, M., Kotera, O., Petru, J., Scholz, S., 2019. INFLUENCE OF BASIC PROCESS PARAMETERS ON MECHANICAL AND INTERNAL PROPERTIES OF 316L STEEL IN SLM PROCESS FOR RENISHAW AM400. MM SJ 2019, 2790 – 2794. https://doi.org/10.17973/MMSJ.2019_03_2018127 Hui, J., Huang, J., Yan, Z., Zhang, H., 2021. Energy Consumption Model for pulse-laser Selective Laser Melting. J. Phys.: Conf. Ser. 2009, 012067. https://doi.org/10.1088/1742-6596/2009/1/012067 Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Kononenko, G.A., LLC “Additive laser technology of Ukraine,” Adjamsky, S.V., LLC “Additive laser technology of Ukraine,” Podolskyi, R.V., Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, LLC “Additive laser technology of Ukraine,” Ukrainian State University of Science and Technologies, Safronova, O.A., Iron and Steel Institu te of Z. I. Nekrasov National Academy of Sciences of Ukraine, Shpak, E.A., Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, 2022. Comparative study of mechanical properties of 316L steel samples made on the ALFA-150 machine in compliance with world analogues. Fund.Appl.Probl.F.Met 36, 370 – 378. https://doi.org/10.52150/2522-9117-2022-36-370-378 Kim, Y.W., Park, H., Eom, Y.S., Ahn, D.G., Kim, K.T., Yu, J., Choi, Y.S., Park, J.M., 2023. High-speed manufacturing-driven strength-ductility improvement of H13 tool steel fabricated by selective laser melting. Powder Metallurgy 66, 582 – 592. https://doi.org/10.1080/00325899.2023.2241245 Król, M., Mazurkiewicz, J., Żołnierczyk, S., 2018. Optimization and analysis of porosityand roughness in selective laser melt ing316L parts. Archives of Materials Science and Engineering 1, 5 – 15. https://doi.org/10.5604/01.3001.0012.0607 Li, J., 2023. Effects of laser power and printing speed on the temperature field during selective laser melting of aluminum alloy. TNS 9, 258 – 264. https://doi.org/10.54254/2753-8818/9/20240770 Li, Y., Ge, Y., Lei, J., Bai, W., 2022. Mechanical Properties and Constitutive Model of Selective Laser Melting 316L Stainless Steel at Different Scanning Speeds. Advances in Materials Science and Engineering 2022, 1 – 13. https://doi.org/10.1155/2022/2905843 Lin, G., 2021. Application of 3D Printing Technology in Machining and Manufacturing. converter 79 – 85. https://doi.org/10.17762/converter.18 Lu, P., Cheng-Lin, Z., Hai-Yi, L., Liang, W., Tong, L., 2020. A new two-step selective laser remelting of 316L stainless steel: process, density, surface roughness, mechanical properties, microstructure. Mater. Res. Express 7, 056503. https://doi.org/10.1088/2053-1591/ab8b86 Lyczkowska-Widlak, E., Lochynski, P., Nawrat, G., Chlebus, E., 2019. Comparison of electropolished 316L steel samples manufactured by SLM and traditional technology. RPJ 25, 566 – 580. https://doi.org/10.1108/RPJ-03-2018-0060 Pagac, M., Hajnys, J., Halama, R., Aldabash, T., Mesicek, J., Jancar, L., Jansa, J., 2021. Prediction of Model Distortion by FEM in 3D Printing via the Selective Laser Melting of Stainless Steel AISI 316L. Applied Sciences 11, 1656. https://doi.org/10.3390/app11041656 Piscopo, G., Salmi, A., Atzeni, E., 2019. On the quality of unsupported overhangs produced by laser powder bed fusion. IJMR 14, 198. https://doi.org/10.1504/IJMR.2019.100012 Shen, L.-C., Yang, X.-H., Ho, J.-R., Tung, P.-C., Lin, C.-K., 2020. Effects of Build Direction on the Mechanical Properties of a Martensitic Stainless Steel Fabricated by Selective Laser Melting. Materials 13, 5142. https://doi.org/10.3390/ma13225142 Spierings, A.B., Herres, N., Levy, G., 2011. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts. Rapid Prototyping Journal 17, 195 – 202. https://doi.org/10.1108/13552541111124770 Trubačová, P., Piska, M., Horníková, J., Šandera, P., Slámečka, K., 2016. Analysis of Selective Laser Melting Process Paramet ers Effect on Mechanical and Material Properties for Stainless Steel 316L. SSP 258, 579 – 582. https://doi.org/10.4028/www.scientific.net/SSP.258.579 Vukkum, V.B., Christudasjustus, J., Darwish, A.A., Storck, S.M., Gupta, R.K., 2022. Enhanced corrosion resistance of additively manufactured stainless steel by modification of feedstock. npj Mater Degrad 6, 2. https://doi.org/10.1038/s41529-021-00215-z Wang, H., Shu, X., Zhao, J., 2022. Influence of Build Angle and Polishing Roughness on Corrosion Resistance of 316L Stainless Steel Fabricated by SLM Method. Materials 15, 4020. https://doi.org/10.3390/ma15114020 Wang, Y., Li, Z., Cui, J., Zhang, W., Liu, Y., 2024. Experimental Study on Parameters Optimization of Selective Laser Melting 316L Stainless Steel Based on the Response Surface Methodology. Journal of Engineering Materials and Technology 146, 041004. https://doi.org/10.1115/1.4065426 Wu, B., Ji, X., Zhou, J., Yang, H., Peng, D., Wang, Z., Wu, Y., Yin, Y., 2021. In situ monitoring methods for selective laser melting additive manufacturing process based on images — A review. China Foundry 18, 265 – 285. https://doi.org/10.1007/s41230-021-1111-x Zhai, W., Zhou, W., Zhu, Z., Nai, S.M.L., 2022. Selective Laser Melting of 304L and 316L Stainless Steels: A Comparative Study of Microstructures and Mechanical Properties. steel research int. 93, 2100664. https://doi.org/10.1002/srin.202100664