PSI - Issue 77

Roman Hofmann et al. / Procedia Structural Integrity 77 (2026) 237–247

247

Roman Hofmann et al. / Structural Integrity Procedia 00 (2026) 000–000

11

References

[1] Ali, H., Ghadbeigi, H., Mumtaz, K., 2018. E ff ect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A 712, 175–187. doi: 10.1016/j.msea.2017.11.103 . [2] Attard, B., Cruchley, S., Beetz, Ch., Megahed, M., Chiu, Y., Attallah, M., 2020. Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components. Additive Manufacturing 36, 101432. doi: 10.1016/j.addma.2020.101432 . [3] Aurenhammer, F., Edelsbrunner, H., 1984. An optimal algorithm for constructing the weighted voronoi diagram in the plane. Pattern Recognition 17, 251–257. doi: 10.1016/0031-3203(84)90064-5 . [4] Barrionuevo, G.O., Ramos-Grez, J.A., Sa´nchez-Sa´nchez, X., Zapata-Hidalgo, D., Mullo, J.L., Puma-Araujo, S.D., 2024. Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion. Journal of Manufacturing and Materials Processing 8, 35. doi: 10.3390/jmmp8010035 . [5] Beal, V.E., Erasenthiran, P., Hopkinson, N., Dickens, P., Ahrens, C.H., 2008. Scanning strategies and spacing e ff ect on laser fusion of H13 tool steel powder using high power Nd:YAG pulsed laser. International Journal of Production Research 46, 217–232. doi: 10.1080/ 00207540500168279 . [6] Filtser, A., Krauthgamer, R., Trabelsi, O., 2018. Relaxed Voronoi: A Simple Framework for Terminal-Clustering Problems. doi: 10.48550/arXiv. 1809.00942 , arXiv:1809.00942 . [7] Fritz, A.H., Schmu¨tz, J. (Eds.), 2022. Fertigungstechnik. Springer, Berlin, Heidelberg. doi: 10.1007/978-3-662-64875-9 . [8] Hagedorn-Hansen, D., Bezuidenhout, M., Dimitrov, D., Oosthuizen, T., 2017. THE EFFECTS OF SELECTIVE LASER MELTING SCAN STRATEGIES ON DEVIATION OF HYBRID PARTS. South African Journal of Industrial Engineering 28. doi: 10.7166/28-3-1862 . [9] Jia, H., Sun, H., Wang, H., Wu, Y., Wang, H., 2021. Scanning strategy in selective laser melting (SLM): A review. The International Journal of Advanced Manufacturing Technology 113, 2413–2435. doi: 10.1007/s00170-021-06810-3 . [10] Jilabi, A.S.J., 2024. Control of Angular Distortion in Gas Tungsten Arc Aluminum Welds Using the Back-Step Welding Procedure. Annales de Chimie - Science des Mate´riaux 48, 823–829. doi: 10.18280/acsm.480608 . [11] Ka¨ß, M., Weihe, S., Werz, M., 2025. Residual stress and distortion analysis of laser powder bed additive manufactured parts using the incremental hole drilling method and the cantilever method. Journal of Advanced Joining Processes 12, 100336. doi: 10.1016/j.jajp.2025.100336 . [12] Kladovasilakis, N., Charalampous, P., Tsongas, K., Kostavelis, I., Tzovaras, D., Tzetzis, D., 2022. Influence of Selective Laser Melting Additive Manufacturing Parameters in Inconel 718 Superalloy. Materials 15, 1362. doi: 10.3390/ma15041362 . [13] Koutny, D., Palousek, D., Pantelejev, L., Hoeller, C., Pichler, R., Tesicky, L., Kaiser, J., 2018. Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting. Materials 11, 298. doi: 10.3390/ma11020298 . [14] Lagae, A., Dutre´, P., 2008. A Comparison of Methods for Generating Poisson Disk Distributions. Computer Graphics Forum 27, 114–129. doi: 10.1111/j.1467-8659.2007.01100.x . [15] Marattukalam, J.J., Karlsson, D., Pacheco, V., Beran, P., Wiklund, U., Jansson, U., Hjo¨rvarsson, B., Sahlberg, M., 2020. The e ff ect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS. Materials & Design 193, 108852. doi: 10.1016/j.matdes.2020.108852 . [16] Ponnusamy, P., Rahman Rashid, R.A., Masood, S.H., Ruan, D., Palanisamy, S., 2020. Mechanical Properties of SLM-Printed Aluminium Alloys: A Review. Materials 13, 4301. doi: 10.3390/ma13194301 . [17] Popovich, V., Borisov, E., Popovich, A., Sufiiarov, V.Sh., Masaylo, D., Alzina, L., 2017. Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties. Materials & Design 114, 441–449. doi: 10. 1016/j.matdes.2016.10.075 . [18] Raju, N., Ravichandran, G., Sudharsanam, V., Easwaran, R., 2013. Distortion and its Control in Welding of Stainless Steel Structures - Case Studies. Advanced Materials Research 794, 358–365. doi: 10.4028/www.scientific.net/AMR.794.358 . [19] Ramos, D., Belblidia, F., Sienz, J., 2019. New scanning strategy to reduce warpage in additive manufacturing. Additive Manufacturing 28, 554–564. doi: 10.1016/j.addma.2019.05.016 . [20] Truong, T., Asala, G., Ola, O., Ojo, O., Odeshi, A., 2023. E ff ects of process parameters and loading direction on the impact strength of additively manufactured 18%Ni-M350 maraging steel under dynamic impact loading. Materials Science and Engineering: A 874, 145074. doi: 10.1016/ j.msea.2023.145074 .