PSI - Issue 77

Boyu Li et al. / Procedia Structural Integrity 77 (2026) 316–322 Boyu Li et al. / Structural Integrity Procedia 00 (2026) 000 – 000

322

7

architectural features more accurately. Hence, our uture work will focus on employing specimens with larger dimensions in order to achieve better compatibility with the sampling resolution. This approach is expected to improve the reliability of the simulations, enhance the printing design and quality, and promote greater structural uniformity, also increasing the overall accuracy of experimental measurements. References Alsoufi, M.S., Elsayed, A.E, 2018. Surface roughness quality and dimensional accuracy - a comprehensive analysis of 100% infill printed parts fabricated by a personal/desktop cost-effective FDM 3D printer. Materials Sciences and Applications, 9, 11 – 40. Bacciaglia, A., Falcetelli, F., Troiani, E., Di Sante, R., Liverani, A., Ceruti, A, 2023. Geometry reconstruction for additive manufacturing: from G CODE to 3D CAD model. Materials Today: Proceedings, 75, 16 – 22. Banjo, A.D., Agrawal, V., Auad, M.L., Celestine, A.D.N, 2022. Moisture-induced changes in the mechanical behavior of 3D printed polymers. Composites Part C: Open Access, 7, 100243. Gagani, A.I., Echtermeyer, A.T., 2018. Fluid diffusion in cracked composite laminates – Analytical, numerical and experimental study. Composites Science and Technology, 160, 86 – 96. Hachimi, T., Majid, F., Zekriti, N., Rhanim, R., Rhanim, H., 2024. Improvement of 3D printing polymer simulations considering converting G code to Abaqus. International Journal of Advanced Manufacturing Technology, 131, 5193 – 5208. Hanon, M.M., Zsidai, L., Ma, Q., 2021. Accuracy investigation of 3D printed PLA with various process parameters and different colors. Materials Today: Proceedings, 42, 3089 – 3096. Ivey, M., Melenka, G.W., Carey, J.P., Ayranci, C., 2017. Characterizing short-fiber-reinforced composites produced using additive manufacturing. Advanced Manufacturing: Polymer & Composites Science, 3, 81 – 91. Jiang, N., Li, Y., Li, D., Yu, T., Li, Y., Xu, J., Li, N., Marrow, T.J., 2020. 3D finite element modeling of water diffusion behavior of jute/PLA composite based on X-ray computed tomography. Composites Science and Technology, 199, 108313. Kim, D.H., Seo, H.S., 2023. Role of the wall layer in 3D-printed composites under the salt spray condition. Journal of Marine Science and Engineering, 11, 1416. Li, B., Baxevanakis, K.P., Silberschmidt, V.V., 2024. Water diffusion in additively manufactured polymers: Analysis of the capillary effect. Micro, 4, 281-294. Li, W., Zhao, X., Liu, Y., Ouyang, Y., Li, W., Chen, D., Ye, D., 2023. Hygrothermal aging behavior and flexural property of carbon fiber-reinforced polyethylene terephthalate glycol composites. Textile Research Journal, 93, 1005 – 1018. Montalti, A., Ferretti, P., Santi, G.M., 2024. From CAD to G-code: Strategies to minimizing errors in 3D printing process. CIRP Journal of Manufacturing Science and Technology, 55, 62 – 70. Stroud, I., Xirouchakis, P.C., 2000. STL and extensions. Advances in Engineering Software, 31, 83 – 95. Wang, M., 2024. Multiscale water diffusivity prediction of plain woven composites considering void defects. Science and Engineering of Composite Materials, 31, 20220236. Zhang, K., Shi, D., Wang, W., Wang, Q., 2017. Mechanical characterization of hybrid lattice-to-steel joint with pyramidal CFRP truss for marine application. Composite Structures, 160, 1198 – 1204. Zouaoui, M., Gardan, J., Lafon, P., Makke, A., Labergere, C., Recho, N., 2021. A finite element method to predict the mechanical behavior of a pre-structured material manufactured by fused filament fabrication in 3D printing. Applied Sciences, 11, 5075.