Issue 74

A.Ganji et alii, Fracture and Structural Integrity, 74 (2025) 421-437; DOI: 10.3221/IGF-ESIS.74.26

[9] Kharat, W.S. and Sidhu, J.S., 2016. Development of epoxy based composites filled with boron carbide (B4C), tungsten disulphide (WS2) and evaluation of its mechanical properties. Int J Mech Eng Res, 6, pp.19-30. [10] Abenojar, J., Martínez, M.A., Velasco, F., Pascual-Sánchez, V., Martín-Martínez, J.M. (2009). Effect of Boron Carbide Filler on the Curing and Mechanical Properties of an Epoxy Resin, The Journal of Adhesion, 85(4–5), pp. 216–238. DOI: https://doi.org/10.1080/00218460902881782. [11] Rallini, M., Natali, M., Kenny, J.M., Torre, L. (2013). Effect of boron carbide nanoparticles on the fire reaction and fire resistance of carbon fiber/epoxy composites, Polymer, 54(19), pp. 5154–5165. DOI: https://doi.org/10.1016/j.polymer.2013.07.038. [12] Abuali Galehdari, N., Kelkar, A.D. (2017). Effect of neutron radiation on the mechanical and thermophysical properties of nanoengineered polymer composites, J. Mater. Res., 32(2), pp. 426–434. DOI: https://doi.org/10.1557/jmr.2016.494. [13] Revankar, S., Banapurmath, N.R., Sajjan, A.M., Nimbagal, V., Patil, A.Y., Venkatesh, R., Umarfarooq, M.A., Vadlamudi, C., Krishnappa, S. (2022). Epoxy-poly lactic acid blended composites reinforced with carbon fibres for engineering applications, Mat Express, 12(12), pp. 1502–1511. DOI: https://doi.org/10.1166/mex.2022.2303. [14] Dileep, K., Srinath, A., Banapurmath, N.R., Umarfarooq, M.A., Sajjan, A.M. (2023). Mechanical and Fracture Characterization of Epoxy/PLA/Graphene/SiO2 Composites, Frattura Ed Integrità Strutturale, 17(64), pp. 229–239. DOI: https://doi.org/10.3221/IGF-ESIS.64.15. [15] ASTM, D638-14:2014. Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA, USA 2014. [16] ASTM D790, Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, ASTM International, West Conshohocken, PA 2010. [17] ASTM D4812-19e1, Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics. ASTM International: West Conshohocken, PA, USA, 2022. [18] ASTM Standard D5045, Standard Test Methods for Plane Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials, ASTM International, West Conshohocken PA 1999, p. s2007 [19] Dileep, K., Umarfarooq, M.A., Srinath, A., Banapurmath, N.R., Sajjan, A.M. (2024). Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites, Frattura Ed Integrità Strutturale, 18(70), pp. 91–104. DOI: https://doi.org/10.3221/IGF-ESIS.70.05. [20] Varughese, J.J., M. S., S. (2024). Investigation on enhancement of filler dispersion and prediction of mechanical behavior of hexagonal boron nitride/epoxy nanocomposites through machine learning and deep learning models, Polymer Composites, 45(7), pp. 6287–6304. DOI: https://doi.org/10.1002/pc.28197. [21] Umarfarooq, M.A., Choukimath, M., Banapurmath, N.R. (2024). Mechanical, Fracture, and Thermal Characterization of Post-Cured Hybrid Epoxy Nanocomposites Reinforced with Graphene Nanoplatelets and h-Boron Nitride, Fracture and Structural Integrity, 19(71), pp. 22–36. DOI: https://doi.org/10.3221/IGF-ESIS.71.03. [22] Nimbagal, V., Banapurmath, N.R., Umarfarooq, M.A., Revankar, S., Sajjan, A.M., Soudagar, M.E.M., Shahapurkar, K., Alamir, M.A., Alarifi, I.M., Elfasakhany, A. (2023). Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy composites, Polymer Composites, 44(7), pp. 3977–3989. DOI: https://doi.org/10.1002/pc.27371. [23] B. Hiremath, G., R. Banapurmath, N., M. Sajjan, A., H. Ayachit, N., Badiger, N.M. (2025). Effect of Boron Nanoparticles on Epoxy Composites on Mechanical and Ionizing Radiation Protection Properties, Nuclear Technology, pp. 1–10. DOI: https://doi.org/10.1080/00295450.2025.2483055. [24] Xie, Y., Kurita, H., Ishigami, R., Narita, F. (2020). Assessing the Flexural Properties of Epoxy Composites with Extremely Low Addition of Cellulose Nanofiber Content, Applied Sciences, 10(3), p. 1159. DOI: https://doi.org/10.3390/app10031159.

437