PSI - Issue 71

Ravi Prakash et al. / Procedia Structural Integrity 71 (2025) 325–332

332

Bian, P., Jammal, A., Xu, K., Ye, F., Zhao, N., and Song, Y. 2025. A Review of the Evolution of Residual Stresses in Additive Manufacturing During Selective Laser Melting Technology. Materials, 18(8), 1707. Bukovská, Š., Moravec, J., Solfronk, P., and Pekárek, M. 2022. Assessment of the Effect of Residual Stresses Arising in the HAZ of Welds on the Fatigue Life of S700MC Steel. Metals, 12(11), 1890. Cao, J., Gharghouri, M. A., and Nash, P. 2016. Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates. Journal of Materials Processing Technology, 237, 409 – 419. Carpenter, K., and Tabei, A. 2020. On Residual Stress Development, Prevention, and Compensation in Metal Additive Manufacturing. Materials, 13(2), 255. https://doi.org/10.3390/ma13020255 Chen, L. Y., Huang, J. C., Lin, C. H., Pan, C. T., Chen, S. Y., Yang, T. L., Lin, D. Y., Lin, H. K., and Jang, J. S. C. 2017. Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting. Materials Science and Engineering: A, 682, 389 – 395. Chen, S., Ma, J., Gao, H., Wang, Y., and Chen, X. 2023. Research on Residual Stresses and Microstructures of Selective Laser Melted Ti6Al4V Treated by Thermal Vibration Stress Relief. Micromachines, 14(2), 354. Chen, S., Zhang, Y., Wu, Q., Gao, H., Gao, Z., and Li, X. 2021. Effect of solid-state phase transformation on residual stress of selective laser melting Ti6Al4V. Materials Science and Engineering: A, 819, 141299. https://doi.org/10.1016/j.msea.2021.141299 Dandekar, T. R. 2024. Insights into the Microstructure and Texture Evolution Using Electron Backscattered Diffraction and Thermal Stability of Low Mn Fe – 25Cr – 6.5Ni – 3.5Mo Alloy. Arabian Journal for Science and Engineering, 49(2), 1447 – 1459. DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., and Zhang, W. 2018. Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, 112 – 224. He, Z., He, H., Lou, J., Li, Y., Li, D., Chen, Y., and Liu, S. 2020. Fabrication, Structure and Mechanical and Ultrasonic Properties of Medical Ti6Al4V Alloys Part I: Microstructure and Mechanical Properties of Ti6Al4V Alloys Suitable for Ultrasonic Scalpel. Materials, 13(2), 478. Illarionov, A. G., Vodolazskiy, F. V., Barannikova, N. A., Kosmatskiy, Y. I., and Khudorozhkova, Y. V. 2021. Influence of phase composition on thermal expansion of Ti-0.4Al, Ti-2.2Al-2.5Zr and Ti-3Al-2.5V alloys. Journal of Alloys and Compounds, 857, 158049. Kumar, B., Dandekar, T. R., and Birosca, S. 2024. Probing the temperature field and residual stress transformation in multi-track, multi-layered system. Materials Today Communications, 38, 108056. Kumar, B., and Nagamani Jaya, B. 2023. Thermal Stability and Residual Stresses in Additively Manufactured Single and Multi-material Systems. Metallurgical and Materials Transactions A, 54(5), 1808 – 1824. Kyvelou, P., Slack, H., Daskalaki Mountanou, D., Wadee, M. A., Britton, T. Ben, Buchanan, C., and Gardner, L. 2020. Mechanical and microstructural testing of wire and arc additively manufactured sheet material. Materials and Design, 192, 108675. Li, C., Liu, Z. Y., Fang, X. Y., and Guo, Y. B. 2018. Residual Stress in Metal Additive Manufacturing. Procedia CIRP, 71, 348 – 353. Maietta, S., Gloria, A., Improta, G., Richetta, M., De Santis, R., and Martorelli, M. 2019. A Further Analysis on Ti6Al4V Lattice Structures Manufactured by Selective Laser Melting. Journal of Healthcare Engineering, 2019, 1 – 9. Mercelis, P., and Kruth, J. 2006. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 12(5), 254 – 265. Mukherjee, T., Zhang, W., and DebRoy, T. 2017. An improved prediction of residual stresses and distortion in additive manufacturing. Computational Materials Science, 126, 360 – 372. Nabavi, S. F., Dalir, H., and Farshidianfar, A. 2024. A comprehensive review of recent advances in laser powder bed fusion characteristics modeling: metallurgical and defects. The International Journal of Advanced Manufacturing Technology, 132(5 – 6), 2233 – 2269. Parry, L., Ashcroft, I. A., and Wildman, R. D. 2016. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Additive Manufacturing, 12, 1 – 15. Walker, T. R., Bennett, C. J., Lee, T. L., and Clare, A. T. 2019. A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718. International Journal of Mechanical Sciences, 151, 609 – 621. Wang, M., Cao, R., Chang, H., and Liang, D. 2023. The effect of rescanning strategy on residual stress and deformation of laser-based powder bed fusion of 316L stainless steel thin-walled parts. Rapid Prototyping Journal, 29(5), 1044 – 1060. Yadroitsava, I., Grewar, S., Hattingh, D., and Yadroitsev, I. 2015. Residual Stress in SLM Ti6Al4V Alloy Specimens. Materials Science Forum, 828 – 829, 305 – 310. Yan, Z., Guo, J., and Zou, X. 2024. Effect of Post-Heat Treatment on the Mechanical and Residual Stress Behavior of Pulsed Wave S316L Fabricated by Directed Energy Deposition. Sensors, 24(23), 7457. Yuan, Q., Liu, C., Wang, W., and Wang, M. 2023. Residual stress distribution in a large specimen fabricated by wire-arc additive manufacturing. Science and Technology of Welding and Joining, 28(2), 137 – 144.