PSI - Issue 71

R. Anil Kumar et al. / Procedia Structural Integrity 71 (2025) 302–308

308

platform

temperature

during

laser

powder

bed

fusion

of

AlSi10Mg.

Acta

Materialia,

201,

231 – 243.

https://doi.org/10.1016/j.actamat.2020.10.001 Takata, N., Liu, M., Kodaira, H., Suzuki, A., and Kobashi, M. 2020. Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al – Si-based alloys. Additive Manufacturing, 33, 101152. https://doi.org/10.1016/j.addma.2020.101152 Tian, Y., Tomus, D., Rometsch, P., and Wu, X. 2017. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting. Additive Manufacturing, 13, 103 – 112. https://doi.org/https://doi.org/10.1016/j.addma.2016.10.010 Wu, J., Wang, X. Q., Wang, W., Attallah, M. M., and Loretto, M. H. 2016. Microstructure and strength of selectively laser melted AlSi10Mg. Acta Materialia, 117, 311 – 320. https://doi.org/10.1016/j.actamat.2016.07.012 Xiao, F., Shu, D., Wang, Y., Sun, Q., Wang, D., Yang, C., Wang, S., Mi, J., Sun, B., and StJohn, D. H. 2024. Tailoring hierarchical microstructures and nanoprecipitates in additive-manufactured Al-Zn-Mg-Cu-Nb alloys for simultaneously enhancing strength and ductility. Communications Materials, 5(1), 52. https://doi.org/10.1038/s43246-024-00489-1 Zhang, X. X., Lutz, A., Andrä, H., Lahres, M., Gan, W. M., Maawad, E., and Emmelmann, C. 2021. Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy. International Journal of Plasticity, 139, 102946. https://doi.org/10.1016/j.ijplas.2021.102946 Zhao, L., Santos Macías, J. G., Ding, L., Idrissi, H., and Simar, A. 2019. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions. Materials Science and Engineering: A, 764, 138210. https://doi.org/10.1016/j.msea.2019.138210 Zhao, L., Song, L., Santos Macías, J. G., Zhu, Y., Huang, M., Simar, A., and Li, Z. 2022. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg. Additive Manufacturing, 56, 102914. https://doi.org/https://doi.org/10.1016/j.addma.2022.102914