Issue 71

P. Doubek et alii, Fracture and Structural Integrity, 71 (2025) 67-79; DOI: 10.3221/IGF-ESIS.71.06

Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers Pavel Doubek Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Veve ř í 331/95, 602 00 Brno, Czech Republic, and OMNI-X CZ s.r.o., Samalova 60a, 615 00 Brno, Czech Republic pavel.doubek@omni-x.cz http://orcid.org/0000-0002-3010-8771 Ivana Kumpová Brno University of Technology, Faculty of Civil Engineering, Veveri 331/95, 602 00 Brno, Czech Republic and Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, v. v. i, Prosecka 76, Praha, 190 00, Czech Republic Ivana.Kumpova@vutbr.cz , https://orcid.org/0000-0001-8556-4996 Lucie Malíková, Mohammad Sami Al Khazali, Stanislav Seitl Czech Academy of Sciences, Institute of Physics of Materials, v. v. i., Žižkova 22, 616 00 Brno, Czech Republic, and Brno University of Technology, Faculty of Civil Engineering, Veve ř í 331/95, 602 00 Brno, Czech Republic Lucie.Malikova@vut.cz , http://orcid.org/0000-0001-5868-5717 Mohammad.Sami.Al.Khazali@vutbr.cz , https://orcid.org/0009-0004-6998-9264 seitl@ipm.cz , http://orcid.org/0000-0002-4953-4324

Citation: Doubek, P., Kumpová, I., Malíková, L., Al Khazali, M.S., Seitl, S., Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers, Fracture and Structural Integrity, 71 (2025) 67-79.

Received: 06.09.2024 Accepted: 07.10.2024 Published: 11.10.2024 Issue: 01.2025

Copyright: © 2024 This is an open access article under the terms of the CC BY 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

K EYWORDS . S960, Tomography, Laser cladded, Aluminum bronze, Cobalt alloy, stainless steel.

67