Issue 71

K. Annapoorna et alii, Frattura ed Integrità Strutturale, 71 (2025) 285-301; DOI: 10.3221/IGF-ESIS.71.21

Effect of hybrid nano particle reinforcements on fractographic, mechanical and wear behavior of Al6061 alloy composites manufactured by ultrasonic assisted stir casting technique Annapoorna Krishnappa Dept. of Mechanical Eng., RNS Institute of Technology, Visvesvaraya Technological University, India annapoorna.apk@gmail.com, http://orcid.org/0000-0003-2543-4801 Shobha Ramesh Dept. of Industrial Eng. and Management, Ramaiah Institute of Technology, Bengaluru, Karnataka, India shobhamtech@gmail.com, http://orcid.org/0000-0003-0210-3540 Bharath Vedashantha Murthy Dept. of Mechanical Eng., RNS Institute of Technology, Visvesvaraya Technological University, India, bharathv88@gmail.com, http://orcid.org/0000-0001-6765-4728 Rajanna Siddagangappa Dept. of Mechanical Eng., Government Engineering College, Mosale Hosahalli, Karnataka, India rajanna.cit@gmail.com, http://orcid.org/0000-0001-9209-5104 Srimadhu Ashokkumar Trelleborg Sealing Solutions, Bengaluru, Karnataka, India srimadhua@gmail.com, http://orcid.org/0009-0002-7671-2381 Madeva Nagaral Aircraft Research and Design Centre, Hindustan Aeronautics Limited, Bangalore 560037, Karnataka, India madev.nagaral@gmail.com, http://orcid.org/0000-0002-8248-7603 Virupaxi Auradi Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumakuru-572103, Karnataka, India vsauradi@gmail.com, http://orcid.org/0000-0001-6549-6340

Citation: Annapoorna, K., Shobha, R., Bharath, V., Rajanna, S., Ashokkumar, S., Nagaral, M., Auradi, V., Effect of Hybrid Nano Particle Reinforcements on Fractographic, Mechanical and Wear Behavior of Al6061 Alloy Composites Manufactured by Ultrasonic Assisted Stir Casting Technique , Frattura ed Integrità Strutturale, 71 (2025) 285-301.

Received: 25.09.2024 Accepted: 03.11.2024 Published: 05.12.2024 Issue: 01.2025

Copyright: © 2024 This is an open access article under the terms of the CC-BY 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

285