Issue 70

P. Kulkarni et alii, Frattura ed Integrità Strutturale, 70 (2024) 71-90; DOI: 10.3221/IGF-ESIS.70.04

Modeling turning performance of Inconel 718 with hybrid nanofluid under MQL using ANN and ANFIS

Paresh Kulkarni Vi shwakarma Institute of Information Technology, Assistant Professor at Dr. D.Y. Patil Institute of Engineering, Management and Research, Pune-411044, India paresh.219p0014@viit.ac.in, http://orcid.org/0000-0002-2761-8754 Satish Chinchanikar Mechanical department, Vishwakarma Institute of Information Technology, Pune, India satish.chinchanikar@viit.ac.in, http://orcid.org/0000-0002-4175-3098

Citation: Kulkarni, P., Chinchanikar, S., Modeling turning performance of Inconel 718 with hybrid nanofluid under MQL using ANN and ANFIS, Frattura ed Integrità Strutturale, 70 (2024) 71-90.

Received: 17.06.2024 Accepted: 16.07.2024 Published: 02.08.2024 Issue: 10.2024

Copyright: © 2024 This is an open access article under the terms of the CC-BY 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

K EYWORDS . ANN, ANFIS, Inconel 718, Subtractive manufacturing, Tool wear, Fracture, Modeling.

I NTRODUCTION he expansion of the manufacturing field during the previous decade has had an influence on the development of several countries. Precise and sustainable machining are critical to the industrial economy and environmental sustainability. With the goal of enhancing the cutting of nickel alloys using a sustainable strategy, significant research was conducted on cutting and Minimum Quantity Lubrication (MQL) variables. [1]. The Inconel 718 nickel alloy is difficult T

71