Issue 70

N. Motgi et alii, Frattura ed Integrità Strutturale, 70 (2024) 242-256; DOI: 10.3221/IGF-ESIS.70.14

[15] Ahmed, W., Hegab, H., Mohany, A. and Kishawy, H. (2021). On machining hardened steel AISI 4140 with self propelled rotary tools: Experimental investigation and analysis. Int. J. Adv. Manuf. Technol., 113(11-12), pp. 3163-3176. DOI: 10.1007/s00170-021-06827-8. [16] Wang, Z.M. Ezugwu, E.O. and Gupta, A. (1998). Evaluation of a self-propelled rotary tool in the machining of aerospace materials. Tribol. Trans., 41(2), pp. 289-295. DOI: 10.1080/10402009808983750. [17] Kishawy, H.A., Becze, C.E. and McIntosh, D.G. (2004). Tool performance and attainable surface quality during the machining of aerospace alloys using self propelled rotary tools. J. Mater. Process. Technol., 152(3), pp. 266-271. DOI: 10.1016/j.jmatprotec.2003.11.011. [18] Sasahara, H., Kato, A., Nakajima, H., Yamamoto, H., Muraki, T. and Tsutsumi, M. (2008). High-speed rotary cutting of difficult-to-cut materials on multitasking lathe. Int. J. Mach. Tools Manuf., 48(7-8), pp. 841-850. DOI: 10.1016/j.ijmachtools.2007.12.002. [19] Dessoly, V., Melkote, S.N. and Lescalier, C. (2004). Modeling and verification of cutting tool temperatures in rotary tool turning of hardened steel. Int. J. Mach. Tools Manuf., 44(14), pp. 1463–1470. DOI: 10.1016/j.ijmachtools.2004.05.007. [20] Uhlmann, E., Kaulfersch, F. and Roeder, M. (2014). Turning of high-performance materials with rotating indexable inserts. Procedia CIRP, 14, pp. 610-615. DOI: 10.1016/j.procir.2014.03.028. [21] Ezugwu, E.O. (2007). Improvements in the machining of aero-engine alloys using self-propelled rotary tooling technique. J. Mater. Process. Technol., 185(1-3), pp. 60-71. DOI: 10.1016/j.jmatprotec.2006.03.112. [22] Kossakowska, J. and Jemielniak, K. (2012). Application of Self-Propelled Rotary Tools for turning of difficult-to machine materials. Procedia CIRP, 1, pp. 425–430. DOI: 10.1016/j.procir.2012.04.076. [23] Chinchanikar, S. and Gadge, M. (2024). Modelling cutting force for turning AISI 304 stainless steel with PVD-AlTiN coated, PVD-AlTiN coated-microblasted, and MTCVD-TiCN/Al 2 O 3 coated tools. Advances in Materials and Processing Technologies, pp. 1-26. DOI: 10.1080/2374068X.2024.2341512. [24] Kulkarni, P. and Chinchanikar, S. (2024). Machining effects and multi-objective optimization in Inconel 718 turning with unitary and hybrid nanofluids under MQL. Frattura ed Integrità Strutturale, 68, pp. 222-241. DOI: 10.3221/IGF-ESIS.68.15. [25] Chinchanikar, S. and Gadge, M. (2024). Investigations on tool wear behavior in turning AISI 304 stainless steel: An empirical and neural network modeling approach. Frattura ed Integrità Strutturale, 18(67), pp. 176-191. DOI: 10.3221/IGF-ESIS.67.13.

256