PSI - Issue 69

Haofei Zhu et al. / Procedia Structural Integrity 69 (2025) 113–120

120

References

[1] C. Wang, Y. Gao, Y. Li, S. Han, S. Liu, P. Zhang, Effects of solid-solution temperature on microstructure and mechanical properties of a novel 2000 MPa grade ultra-high-strength steel, Journal of Iron and Steel Research International 27(6) (2020) 710-718. [2] C. Zhang, Z. Xiong, Z. Li, Y. Cao, D. Yang, X. Cheng, On the role of chemical heterogeneity in carbon diffusion during quenching and partitioning, Acta Mater. 271 (2024). [3] Z. Xiong, I. Timokhina, E. Pereloma, Clustering, nano-scale precipitation and strengthening of steels, Prog. Mater Sci. 118 (2021) 100764. [4] J. Li, D. Zhan, Z. Jiang, H. Zhang, Y. Yang, Y. Zhang, Progress on improving strength-toughness of ultra-high strength martensitic steels for aerospace applications: a review, J. Mater. Res. Technol. 23 (2023) 172-190. [5] R. Ayer, P.M. Machmeier, Transmission electron microscopy examination of hardening and toughening phenomena in Aermet 100, Metall. Trans. A 24A (1993) 1943-1955. [6] A. Mondiere, V. Déneux, N. Binot, D. Delagnes, Controlling the MC and M2C carbide precipitation in Ferrium® M54® steel to achieve optimum ultimate tensile strength/fracture toughness balance, Mater. Charact. 140 (2018) 103-112. [7] X. Li, Z. Zhang, X. Cheng, Q. Wang, G. Hao, A rapid route to improve the mechanical properties of the aged high Co-Ni steel, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 834 (2022). [8] D. Delagnes, F. Pettinari-Sturmel, M.H. Mathon, R. Danoix, F. Danoix, C. Bellot, P. Lamesle, A. Grellier, Cementite-free martensitic steels: A new route to develop high strength/high toughness grades by modifying the conventional precipitation sequence during tempering, Acta Mater. 60 (2012) 5877-5888. [9] H. Zhu, Z. Xiong, J. Mao, X. Cheng, Effect of ageing temperature on the microstructural evolution and mechanical properties in M2C and NiAl co-precipitation secondary hardening ultrahigh-strength steel, J. Mater. Res. Technol. 30 (2024) 3522-3534. [10] Y. Gao, S. Liu, X. Hu, Q. Ren, Y. Li, V. Dravid, C. Wang, A novel low cost 2000 MPa grade ultra-high strength steel with balanced strength and toughness, Mater. Sci. Eng. A 759 (2019) 298-302. [11] Y. Zhang, D. Zhan, X. Qi, Z. Jiang, Effect of solid-solution temperature on the microstructure and properties of ultra-high-strength ferrium S53® steel, Mater. Sci. Eng. A 730 (2018) 41-49. [12] H. Zhu, Z. Xiong, J. Mao, X. Cheng, Low-cost secondary hardening steel under double ageing: Dual-precipitation control, austenite modification and strength-toughness improvement, Mater. Sci. Eng. A 931 (2025) 148159. [13] H. Zhu, Z. Xiong, J. Mao, X. Cheng, Achieving ultra-high strength, good toughness and cost reduction in secondary hardening steel via dual precipitation, Mater. Charact. 223 (2025) 114869 [14] Y. Zhao, X. Tong, X.H. Wei, S.S. Xu, S. Lan, X.L. Wang, Z.W. Zhang, Effects of microstructure on crack resistance and low-temperature toughness of ultra-low carbon high strength steel, Int. J. Plast. 116 (2019) 203-215.