Issue 69

S. Eleonsky et alii, Frattura ed Integrità Strutturale, 69 (2024) 192-209; DOI: 10.3221/IGF-ESIS.69.14

A CKNOWLEDGEMENTS

A

uthors thank the Russian Science Foundation for providing support in the frame of the 21-19-00791 project, (https://rscf.ru/en/project/21-19-00791/).

R EFERENCES

[1] Masubuchi, K. (1980). Analysis of welded structures: residual stresses, distortion, and their consequences. Pergamon: Oxford. [2] Withers, PJ., Bhadeshia HKDH. (2001). Residual stress: Part 1 - measurement techniques, Mater Sci Technol, 17, pp. 355–365. [3] Schajer, GS. (2001). Residual stresses: Measurement by destructive methods. In: Buschow KHJ, et al. (eds) Encyclopedia of Materials: Science and Technology, Section 5a, Elsevier Science, Oxford. [4] Schajer, GS (ed). (2013). Practical residual stress measurement methods. Wiley, Chichester, UK. [5] Schajer, GS., Prime, MB., Withers, PJ. (2022). Why Is It So Challenging to Measure Residual Stresses?, Experimental Mechanics, 62, pp. 1521-1530, DOI: 10.1007/s11340-022-00879-x. [6] Nelson, DV. (2010). Residual stress determination by hole drilling combined with optical methods, Exp. Mech., 50(2), pp. 145–158, DOI: 10.1007/s11340-009-9329-3. [7] Schajer, GS. (2010). Advances in hole-drilling residual stress measurement, Exp. Mech., 50(2), pp. 159–168, DOI: 10.1007/s11340-009-9228-7. [8] Huang, X., Liu, Z., Xie, H. (2013). Recent progress in residual stress measurement techniques, Acta Mech Solida Sin, 26(6), pp. 570–583, DOI: 10.1016/S0894-9166(14)60002-1. [9] Jiang, G., Fu, H., Pan, B., Kang, R. (2019). Recent progress of residual stress measurement methods: A review. Chinese Journal of Aeronautics, 34(2), pp. 54-78, DOI: 10.1016/j.cja.2019.10.010. [10] Pisarev, V.S., Odintsev, I.N., Eleonsky, S.I., Apalkov, A.A. (2018). Residual stress determination by optical interferometric measurements of hole diameter increments, Optics and Lasers in Engineering, 110, pp. 437–456, DOI: 10.1016/j.optlaseng.2018.06.022. [11] Nelson, D.V., Fuchs, E.A., Makino, A., Williams, D.R. (1994). Residual stress determination by single axis holographic interferometry and hole drilling - Part II, Experiments. Exp Mech, 34(1), pp. 79–88, DOI: 10.1007/BF02328444. [12] Nelson, D.V., Makino, A., Fuchs, E.A. (1997). The holographic hole-drilling method for residual stress determination, Opt. Lasers Eng., 27(1), pp. 3–23. [13] Makino, A., Nelson, D.V., Fuchs, E.A., Williams, D.R. (1996). Determination of biaxial residual stresses by a holographic hole-drilling technique, ASME J. Eng. Mater. Technol., 118(4), pp. 583–538. [14] Steinzig, M., Ponslet, E. (2003). Residual stress measurement using the hole drilling method and laser speckle interferometry –Part I, Exp. Tech., 27(3), pp. 43–46, DOI: 10.1111/j.1747-1567.2003.tb00114.x. [15] Ponslet, E., Steinzig. M. (2003). Residual stress measurement using the hole drilling method and laser speckle interferometry - Part II: Analysis technique, Exp. Tech., 27(4), pp. 1–5, DOI: 10.1111/j.1747-1567.2003.tb00117.x. [16] Ponslet, E., Steinzig, M. (2003). Residual stress measurement using the hole drilling method and laser speckle interferometry - Part III: Analysis technique, Exp. Tech., 27(5), pp. 45–48, DOI: 10.1111/j.1747-1567.2003.tb00130.x. [17] Steinzig, M., Takahashi, T. (2003). Residual stress measurement using the hole drilling method and laser speckle interferometry - Part IV: Measurement accuracy, Exp. Tech., 27(6), pp. 59–63, DOI: 10.1111/j.1747-1567.2003.tb00141.x. [18] Schajer, G.S., Steinzig, M. (2005). Full-field calculation of hole drilling residual stresses from electronic speckle pattern interferometry data, Exp. Mech., 45(6), pp. 526–532, DOI: 10.1007/BF02427906. [19] Schmitt, D.R., Hunt, R.W. (2000). Inversion of speckle interferometer fringes for hole drilling residual stress determination, Exp. Mech., 40(2), pp. 1–9, DOI: 10.1007/BF02325038. [20] Schajer, G.S., Prime, M.B. (2006). Use of inverse solutions for residual stress measurement, ASME J. Eng. Mater. Technol., 128(3), pp. 375–382, DOI: 10.1115/1.2204952. [21] Furgiuele, F.M., Pagnotta, L., Poggialini, A. (1991). Measuring residual stresses by hole drilling and coherent optics techniques: a numerical calibration, ASME. J. Eng. Mater. Technol., 113(1), pp. 41–50. [22] Ruzman, I., Schmitt, D.R. (2003). Three-dimensional stress-relief displacements from blind–hole drilling: a parametric description, Exp. Mech., 43(1), pp. 52–60, DOI: 10.1007/BF02410484.

208