Issue 69

M.P. Khudyakov et alii, Frattura ed Integrità Strutturale, 69 (2024) 129-141; DOI: 10.3221/IGF-ESIS.69.10

Figure 5: Cutting forces rate in the cut-down milling process (t = 1.5 mm, s = 0.1 mm/tooth, V = 180 m/min).

Figure 6: The amplitude curve of xy F in the cut-down milling process (t = 1.5 mm, s = 0.1 mm/tooth, V = 180 m/min).

Figure 7: The amplitude curve of xy F in the cut-up milling process (t = 1.5 mm, s = 0.1 mm/tooth, V = 180 m/min).

135