PSI - Issue 68

Lucie Malíková et al. / Procedia Structural Integrity 68 (2025) 225–230 L. Malíková et al. / Structural Integrity Procedia 00 (2025) 000–000

230

6

from the state budget of the Czech Republic. Financial support from the Faculty of Civil Engineering, Brno University of Technology (project No. FAST-S-24-8503) is also gratefully acknowledged. References Elfgren, L., Eligehausen, R., Rots, J.G., 2001. Anchor bolts in concrete structures: summary of round robin tests and analysis arranged by RILEM TC 90-FMA: fracture mechanics of concrete-applications. Materials and Structures 34 (8), 451–457. Eligehausen, R., Mallée, R., Silva, J.F., 2006. Anchorage in concrete construction. Ernst & Sohn, Berlin, Germany, p. 378. Eligehausen, R., Sawade, G.,1989. A fracture mechanics based description of the pull-out behavior of headed studs embedded in concrete. In: Elfgren L, editor. Fracture mechanics of concrete structures. Chapman and Hall, London. EN1992-4, 2018. Eurocode 2 design of concrete structures – Part 4. Design of fastenings for use in concrete. European committee for standardization, Brussels; July 2018 EN1992-4. Erdogan, F., Sih, G.C., 1963. On the crack extension in plates under plates under plane loading and transverse shear. Journal of Basic Engineering 85 (4), 519–525. ETAG 001, 2010. Guideline for european technical approval of metal anchors for use in concrete, edition 1997, Annex C: design methods for anchorages 3 rd amended. Fédération Internationale du Béton (fib), 2011. Design of anchorages in concrete: Part I-V. Lausanne: international federation for structural concrete (fib) [fib Bulletin 58]. Fuchs, W., Eligehausen, R., Breen, J.E., 1995. Concrete Capacity Design (CCD) Approach for Fastening to Concrete. ACI Structural Journal 92 (1), 73–94. Karmokar, T., Mohyeddin, A., Lee, J., Paraskeva, T., 2021. Concrete cone failure of single cast-in anchors under tensile loading – A literature review. Engineering Structures 243, 112615. Krenchel, H., Shah, S.P., 1985. Fracture analysis of the pullout test. Materials and Structures, 439–446. Malíková, L., Miarka, P., Seitl, S., 2024. Short fatigue crack behavior under various level of mixed-mode. Accepted to Proceedings of the 7th International Conference (MSAM 2024), IOS Press Ebooks. Malíková, L., Miarka, P., 2025. Investigations on crack initiation from steel anchors. Submitted to Procedia Structural Integrity within the 8th International Conference on Crack Paths 2024. Nilforoush, R., Nilsson, M., Elfgren, L., 2017. Experiemental evaluation of tensile behaviour of single cast-in-place anchor bolts in plain and steel fibre-reinforced normal- and high-strength concrete. Engineering Structures 147, 195–206. Stone, W.C., Carino, N.J., 1983. Deformation and failure in large-scale pullout tests. ACI Journal Proceedings 80 (6), 501–513.