PSI - Issue 68

Robert Lowe et al. / Procedia Structural Integrity 68 (2025) 173–183 R. Lowe et al. / Structural Integrity Procedia 00 (2025) 000–000

183 11

https://doi.org/10.1017/9781139050586 Dittenber, D.B., GangaRao, H.V.S., 2012. Critical review of recent publications on use of natural composites in infrastructure. Composites Part A: Applied Science and Manufacturing 43, 1419–1429. https://doi.org/10.1016/j.compositesa.2011.11.019 Ferrari, F., Esposito Corcione, C., Striani, R., Saitta, L., Cicala, G., Greco, A., 2021. Fully Recyclable Bio-Based Epoxy Formulations Using Epoxidized Precursors from Waste Flour: Thermal and Mechanical Characterization. Polymers 13, 2768. https://doi.org/10.3390/polym13162768 Goriparthi, B.K., Suman, K.N.S., Mohan Rao, N., 2012. Effect of fiber surface treatments on mechanical and abrasive wear performance of polylactide/jute composites. Composites Part A: Applied Science and Manufacturing 43, 1800–1808. https://doi.org/10.1016/j.compositesa.2012.05.007 Kinloch, A.J., Taylor, A.C., Techapaitoon, M., Teo, W.S., Sprenger, S., 2016. From matrix nano- and micro-phase tougheners to composite macro properties. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 374, 20150275. https://doi.org/10.1098/rsta.2015.0275 Kuwata, M., Hogg, P.J., 2011. Interlaminar toughness of interleaved CFRP using non-woven veils: Part 1. Mode-I testing. Composites Part A: Applied Science and Manufacturing 42, 1551–1559. https://doi.org/10.1016/j.compositesa.2011.07.016 Mouritz, A.P., 2007. Review of z-pinned composite laminates. Composites Part A: Applied Science and Manufacturing 38, 2383–2397. https://doi.org/10.1016/j.compositesa.2007.08.016 Pil, L., Bensadoun, F., Pariset, J., Verpoest, I., 2016. Why are designers fascinated by flax and hemp fibre composites? Composites Part A: Applied Science and Manufacturing 83, 193–205. https://doi.org/10.1016/j.compositesa.2015.11.004 Piñero-Hernanz, R., Dodds, C., Hyde, J., García-Serna, J., Poliakoff, M., Lester, E., Cocero, M.J., Kingman, S., Pickering, S., Wong, K.H., 2008. Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water. Composites Part A: Applied Science and Manufacturing 39, 454–461. https://doi.org/10.1016/j.compositesa.2008.01.001 Prasad, V., Sekar, K., Varghese, S., Joseph, M.A., 2020. Evaluation of interlaminar fracture toughness and dynamic mechanical properties of nano TiO2 coated flax fibre epoxy composites. Polymer Testing 91, 106784. https://doi.org/10.1016/j.polymertesting.2020.106784 Prasad, V., Sekar, K., Varghese, S., Joseph, M.A., 2019. Enhancing Mode I and Mode II interlaminar fracture toughness of flax fibre reinforced epoxy composites with nano TiO2. Composites Part A: Applied Science and Manufacturing 124, 105505. https://doi.org/10.1016/j.compositesa.2019.105505 Quan, D., Alderliesten, R., Dransfeld, C., Murphy, N., Ivanković, A., Benedictus, R., 2020. Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils. Composite Structures 252, 112699. https://doi.org/10.1016/j.compstruct.2020.112699 Quan, D., Deegan, B., Binsfeld, L., Li, X., Atkinson, J., Ivanković, A., Murphy, N., 2020. Effect of interlaying UV-irradiated PEEK fibres on the mechanical, impact and fracture response of aerospace-grade carbon fibre/epoxy composites. Composites Part B: Engineering 191, 107923. https://doi.org/10.1016/j.compositesb.2020.107923 Quan, D., Deegan, B., Byrne, L., Scarselli, G., Ivanković, A., Murphy, N., 2020. Rapid surface activation of carbon fibre reinforced PEEK and PPS composites by high-power UV-irradiation for the adhesive joining of dissimilar materials. Composites Part A: Applied Science and Manufacturing 137, 105976. https://doi.org/10.1016/j.compositesa.2020.105976 Quan, D., Mischo, C., Binsfeld, L., Ivankovic, A., Murphy, N., 2020. Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT- and graphene nanoplatelet-doped thermoplastic veils. Composite Structures 235, 111767. https://doi.org/10.1016/j.compstruct.2019.111767 Ravandi, M., Teo, W.S., Tran, L.Q.N., Yong, M.S., Tay, T.E., 2016. The effects of through-the-thickness stitching on the Mode I interlaminar fracture toughness of flax/epoxy composite laminates. Materials & Design 109, 659–669. https://doi.org/10.1016/j.matdes.2016.07.093 Saitta, L., Prasad, V., Tosto, C., Murphy, N., Ivankovic, A., Cicala, G., Scarselli, G., 2022. Characterization of biobased epoxy resins to manufacture eco-composites showing recycling properties. Polymer Composites 43, 9179–9192. https://doi.org/10.1002/pc.27095