PSI - Issue 68

Mohamed Elsayed et al. / Procedia Structural Integrity 68 (2025) 1003–1009 Elsayed et al. / Structural Integrity Procedia 00 (2025) 000–000

1009

7

nuclear pressure vessel steel. Materials Science and Engineering: A , 625 , 65–80. https://doi.org/https://doi.org/10.1016/j.msea.2014.11.056 Huysmans, S., Peeters, E., De Bruycker, E., & De Prins, K. (2021). Weldability study of additive manufactured 316L austenitic stainless steel components—welding of AM with conventional 316L components. Welding in the World , 65 (7), 1415–1427. https://doi.org/10.1007/s40194-021-01098-z Kadoi, K., Ueno, S., & Inoue, H. (2023). Effects of ferrite content and concentrations of carbon and silicon on weld solidification cracking susceptibility of stainless steels. Journal of Materials Research and Technology , 25 , 1314–1321. https://doi.org/https://doi.org/10.1016/j.jmrt.2023.06.018 Khedr, M., Awad, I., Jaskari, M., Ali, M., Abdel-Aleem, H., Mahmoud, T., & Hamada, A. (2023). Microstructural Evolution and Mechanical Performance of Two Joints of Medium-Mn Stainless Steel with Low-and High-Alloyed Steels. Materials , 16 , 1624. https://doi.org/10.3390/ma16041624 Khedr, M., Elsayed, M., Jaskari, M., Abdel-Aleem, H. A., Gaafer, A. M., & Hamada, A. (2024). Effect of building orientation on weld characteristics of additively manufactured 316L stainless steel: Microstructure and mechanical properties. Materials Science and Engineering: A , 913 , 147086. https://doi.org/10.1016/j.msea.2024.147086 Khedr, M., Elshokrofy, H., Pokka, A., Hamada, A., Jaskari, M., Mustakangas, A., Järvenpää, A., Ibrahim, A. & Elsamanty, M. (2024). Effect of design parameters on auxetic behavior and stiffness of additively manufactured 316L stainless steel. Journal of Materials Research and Technology: 30 , 8805-8814. https://doi.org/10.1016/j.jmrt.2024.05.197 Kou, S. (2020). Nucleation and Growth of Grains. In Welding metallurgy, 3rd Edition. In New Jersey, USA . Kumar, M. P., Varahamoorthi, R., & Gnanamurugan, K. (2020). Materials Today : Proceedings Modelling and optimization of process parameters to obtain maximum tensile strength for laser butt welding of 316L austenitic stainless steel sheets. Materials Today: Proceedings , 26 , 1380–1388. https://doi.org/10.1016/j.matpr.2020.02.279 Kumar, S., & Shahi, A. S. (2011). Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Materials and Design , 32 (6), 3617–3623. https://doi.org/10.1016/j.matdes.2011.02.017 Liu, M., Kumar, A., Bukkapatnam, S., & Kuttolamadom, M. (2021). A Review of the Anomalies in Directed Energy Deposition (DED) Processes & Potential Solutions - Part Quality & Defects. Procedia Manufacturing , 53 , 507–518. https://doi.org/https://doi.org/10.1016/j.promfg.2021.06.093 Mäkikangas, J., Rautio, T., Jalava-Kanervio, J., Mustakangas, A., & Järvenpää, A. (2021). Laser Welding of Laser Powder Bed Fusion (LPBF) Manufactured 316L Stainless Steel Lap Joint. Key Engineering Materials , 883 , 242–249. https://doi.org/10.4028/www.scientific.net/KEM.883.242 Mohyla, P., Hajnys, J., Sternadelová, K., Krejčí, L., Pagáč, M., Konečná, K., & Krpec, P. (2020). Analysis of welded joint properties on an AISI316L stainless steel tube manufactured by SLM technology. Materials , 13 (19), 1–14. https://doi.org/10.3390/ma13194362 Mokhtari, M., Pommier, P., Balcaen, Y., & Alexis, J. (2021). Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes. Journal of Manufacturing and Materials Processing , 5 (4), 136. https://doi.org/10.3390/jmmp5040136 Sohrabpoor, H., Salarvand, V., Lupoi, R., Chu, Q., Li, W., Aldwell, B., Stanley, W., O’Halloran, S., Raghavendra, R., Choi, C. H., & Brabazon, D. (2021). Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion. Journal of Materials Research and Technology , 12 (February), 210–220. https://doi.org/10.1016/j.jmrt.2021.02.090 Zhang, R., Buchanan, C., Matilainen, V. P., Daskalaki-Mountanou, D., Britton, T. Ben, Piili, H., Salminen, A., & Gardner, L. (2021). Mechanical properties and microstructure of additively manufactured stainless steel with laser welded joints. Materials and Design , 208 , 109921. https://doi.org/10.1016/j.matdes.2021.109921