PSI - Issue 68

Ihssane Kididane et al. / Procedia Structural Integrity 68 (2025) 358–364

364

Ihssane Kididane et al. / Structural Integrity Procedia 00 (2024) 000–000

7

energies compared to the literature reference where the failure mode was fully cohesive. These di ff erences in failure mode from the reference can easily be explained by the di ff erent substrate materials used, in this work it was aluminum and in the reference it was steel. Nevertheless, the new experimental methodology was able to satisfactorily describe this (unintended) fracture behavior of the joint. Furthermore, the results of the CMMB and SLB tests were in excellent agreement, which is further evidence of the validity and applicability of the novel testing method.

Acknowledgements

The authors thank Georges Romanos (Henkel AG & Co, Germany) for supplying the adhesive.

References

Ansari, M.A., Huang, R., Liechti, K.M., 2023. Optimal dual actuator loading configurations for extracting mixed-mode cohesive relations from interacting beams. International Journal of Solids and Structures 270, 112229. URL: https://www.sciencedirect.com/science/ article/pii/S0020768323001269 , doi: https://doi.org/10.1016/j.ijsolstr.2023.112229 . Crews, J.H., Reeder, J.R., 1988. A mixed-mode bending apparatus for delamination testing. National Aeronautics and Space Administration, Langley Research Center. Geisel, L.D., Marzi, S., 2024. A modified single-leg bending test to study mode iii fracture of adhesive joints. Engineering Fracture Mechanics 308, 110355. URL: https://www.sciencedirect.com/science/article/pii/S0013794424005186 , doi: https://doi.org/10.1016/ j.engfracmech.2024.110355 . Hahn, O., Meschut, G., Teutenberg, D., Vogel, A., Brede, M., Marzi, S., Matzenmiller, A., Schmerbauch, M., 2012. Experimentelle kennwerter mittlung und simulation von strukturellen klebverbindungen mit elastoplastischen und bruchmechanischen koha¨sivelementen fosta p957. Forschungsvereinigung Stahlanwendung eV, Du¨sseldorf, Germany . Hong, C.S., Yoon, S., 1990. Modified end notched flexure specimen for mixed mode interlaminar fracture in laminated composites. International Journal of Fracture 43, R3–R9. Huber, O., Nickel, J., Kuhn, G., 1993. On the decomposition of the j-integral for 3d crack problems. International Journal of Fracture 64, 339–348. Ji, G., Ouyang, Z., Li, G., 2012. On the interfacial constitutive laws of mixed mode fracture with various adhesive thicknesses. Mechanics of Materials 47, 24–32. URL: https://www.sciencedirect.com/science/article/pii/S0167663612000099 , doi: https://doi. org/10.1016/j.mechmat.2012.01.002 . Kididane, I., Ladwig, N., Marzi, S., 2024. Dual-actuator mixed-mode bending tests on structural adhesive joints. Engineering Fracture Mechan ics 301, 110017. URL: https://www.sciencedirect.com/science/article/pii/S0013794424001802 , doi: https://doi.org/10. 1016/j.engfracmech.2024.110017 . Marzi, S., 2023. 16 - innovations in fracture testing of structural adhesive bonds, in: Dillard, D.A. (Ed.), Advances in Struc tural Adhesive Bonding (Second Edition). second edition ed.. Woodhead Publishing. Woodhead Publishing in Materials, pp. 525– 578. URL: https://www.sciencedirect.com/science/article/pii/B9780323912143000065 , doi: https://doi.org/10.1016/ B978-0-323-91214-3.00006-5 . Marzi, S., Biel, A., Stigh, U., 2011. On experimental methods to investigate the e ff ect of layer thickness on the fracture behavior of adhe sively bonded joints. International Journal of Adhesion and Adhesives 31, 840–850. URL: https://www.sciencedirect.com/science/ article/pii/S0143749611001229 , doi: https://doi.org/10.1016/j.ijadhadh.2011.08.004 . Marzi, S., Hesebeck, O., Brede, M., Kleiner, F., 2009. An end-loaded shear joint (elsj) specimen to measure the critical energy release rate in mode ii of tough, structural adhesive joints. Journal of Adhesion Science and Technology 23, 1883–1891. URL: https://doi.org/10.1163/ 016942409X12508517390716 , doi: 10.1163/016942409X12508517390716 . Panettieri, E., Leclerc, G., Jumel, J., Guitard, J., 2018. Mixed-mode crack propagation tests of composite bonded joints using a dual-actuator load frame – constant and variable gii / gi conditions. Engineering Fracture Mechanics 202, 471–486. URL: https://www.sciencedirect.com/ science/article/pii/S0013794418303345 , doi: https://doi.org/10.1016/j.engfracmech.2018.09.015 . Rigby, R., Aliabadi, M., 1998. Decomposition of the mixed-mode j-integral—revisited. International Journal of Solids and Structures 35, 2073–2099. URL: https://www.sciencedirect.com/science/article/pii/S0020768397001716 , doi: https://doi.org/10. 1016/S0020-7683(97)00171-6 . Sarrado, C., Turon, A., Renart, J., Costa, J., 2015. An experimental data reduction method for the mixed mode bending test based on the j integral approach. Composites Science and Technology 117, 85–91. URL: https://www.sciencedirect.com/science/article/pii/ S0266353815300051 , doi: https://doi.org/10.1016/j.compscitech.2015.05.021 . Singh, H., Chakraborty, A., Frazier, C., Dillard, D., 2010. Mixed mode fracture testing of adhesively bonded specimens using a dual-actuator load frame. Holzforschung 64, 353–361. doi: 10.1515/HF.2010.041 . Yang, T., Gandhi, V., Huang, R., Liechti, K.M., 2022. Rate dependent fracture along a silicon / epoxy interface under mixed-mode loading con ditions. International Journal of Solids and Structures 257, 111129. URL: https://www.sciencedirect.com/science/article/pii/ S0020768321002195 , doi: https://doi.org/10.1016/j.ijsolstr.2021.111129 . special Issue in the honour Dr Stelios Kyriakides. Yosra Rahali, Julien Jumel, G.S., Grognec, P.L., 2023. Fracture properties evaluation of structural adhesives using the dual actuator test frame and digital image correlation technique. The Journal of Adhesion 0, 1–25. doi: 10.1080/00218464.2023.2284962 .