PSI - Issue 68

Victor Rizov et al. / Procedia Structural Integrity 68 (2025) 146–152 V. Rizov / Structural Integrity Procedia 00 (2025) 000–000

152

7

Dolgov, N. A. 2016. Analytical Methods to Determine the Stress State in the Substrate–Coating System under Mechanical Loads. Strength of Materials 48, 658-667. Freund, L.B., 1995, The stress distribution and curvature of a general compositionally graded semiconductor layer. Journal of Crystal. Growth 132, 341-344. Hutchinson, J.W., Suo, Z., 1992, Mixed mode cracking in layered materials. Advanced in Applied Mechanics 64, 804 – 810. Kim, J.S., Paik, K.W., Oh, S.H., 1999. The Multilayer-Modified Stoney’s Formula for Laminated Polymer Composites on a Silicon Substrate. Journal of Applied Physics 86, 5474–5479. Markov, I., Dinev, D., 2005. Theoretical and experimental investigation of a beam strengthened by bonded composite strip. Reports of International Scientific Conference VSU’2005. Mušálek, R., Kováøík, O., Matìjíèek, J., 2010. In-situ observation of crack propagation in thermally sprayed coatings. Surface & Coatings Technology 205, 1807–1811. Rizov, V.I., 2019. Influence of material inhomogeneity and non-linear mechanical behaviour of the material on delamination in multilayered beams. Frattura ed Integrità Strutturale 47, 468-481. Rizov , V.I., 2021. Delamination analysis of multilayered beams exhibiting creep under torsion, Coupled Systems Mechanics 10, 317-331. Rizov , V.I., 2022. Viscoelastic inhomogeneous beam subjected to mechanical loading and periodically varying temperature: a longitudinal fracture analysis. Procedia Structural Integrity 41, 103–114. Sy-Ngoc Nguyen, Jaehun Lee, Maenghyo Cho, 2015. Efficient higher-order zig-zag theory for viscoelastic laminated composite plates. International Journal of Solids and Structures 62, 174-185. Sy-Ngoc Nguyen, Jaehun Lee, Jang-Woo Han, Maenghyo Cho, 2020. A coupled hygrothermo-mechanical viscoelastic analysis of multilayered composite plates for long-term creep behaviors. Composite Structures 242, 112030. Tokova, L., Yasinskyy, A., Ma, C.-C., 2017. Effect of the layer inhomogeneity on the distribution of stresses and displacements in an elastic multilayer cylinder. Acta Mechanica 228, 2856-2877. Yu, J- H., Guo, S., Gillard, D. A., 2003. Bimaterial curvature measurements for CTE of adhesives: optimization and modelling. J Adhes Sci Technol 17, 149-164.