PSI - Issue 68

Robert Szlosarek et al. / Procedia Structural Integrity 68 (2025) 1173–1180 Robert Szlosarek et al. / Structural Integrity Procedia 00 (2025) 000–000

1180

8

References

Basquin, O.H., 1910. The exponential law of endurance tests. ASTM Proceedings 10, 625-630. Coffin, L.F., Jr., 1954. A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal. Transactions of the ASME. 76(6), 931–949. Droste, M., Henkel, S., Biermann, H., Weidner, A, 2022. Influence of Plastic Strain Control on Martensite Evolution and Fatigue Life of Metastable Austenitic Stainless Steel. Metals 12(7), 1222. Korschinsky, T., Möller, B., Kiel, M., Hecht, M., 2024. Analysis of the Anisotropic Cyclic Material Behavior of EN AW-1050A H24 Derived from Strain-Controlled Testing Using a Clip-On Extensometer and an Optical System, Crystals 14(8), 686. Hauser, M., Nitzsche, P., Weidner, A., Henkel, S., Biermann, H., Volkova, O., Wendler, M., 2023. Effect of Cu addition on solidification, precipitation behavior and mechanical properties in austenitic CrNi–N stainless steel. Materials Science and Engineering: A, 862. 144422. Manson, S.S.,1965. Fatigue: A complex subject—Some simple approximations. Experimental Mechanics 5, 193–226. Morrow, J., 1965. Cyclic Plastic Strain Energy and Fatigue of Metals, in “ Internal Friction, Damping, and Cyclic Plasticity ”. In: Lazan, B.J., (Ed.). American Society for Testing & Materials, West Conshohocken, 45. Möller, B., Tomasella, A., Wagener, R., Melz, T., 2017. Cyclic Material Behavior of High-Strength Steels Used in the Fatigue Assessment of Welded Crane Structures with a Special Focus on Transient Material Effects. SAE International Journal of Engines 10(2). Möller, B., 2021. Integral treatment of butt joints for the fatigue life assessment in the low cycle fatigue regime. Weld World 65, 275–288. Nitzsche, P., Hauser, M., Lehnert, N., Weidner, A., Henkel, S., Wendler, M., Freudenberger, J., Volkova, O., Kräusel, V., Biermann, H., 2024. Quasi-static tensile and fatigue behaviour of a metastable austenitic stainless Cr-Ni-Cu-N steel. Theoretical and Applied Fracture Mechanics, 133, 104571. Ramberg, W., Osgood, W.R., 1943. Description of Stress-Strain Curves by Three Parameters. Technical Note No. 902, National Advisory Committee for Aeronautics, Washington DC. Smith, K.N., Watson, P., Topper, T.H., 1970. A Stress-Strain Function for the Fatigue of Metals. Journal of Materials, 4, 767–778.