PSI - Issue 68

Shanyavskiy A. et al. / Procedia Structural Integrity 68 (2025) 453–457 A. Shanyavskiy et al. / Structural Integrity Procedia 00 (2025) 000–000

457

5

b

a

Fig. 4. Plots of real (blue) and simulated (orange) crack fronts for (a) 3 rd and (b) 8 th beach marks.

Acknowledgements The work is supported by the Russian Science Foundation, project 23-19-00640. References

Bathias, C., Paris, P.C. 2004. Gigacycle fatigue in mechanical practice. Marcel Dekker, NY, USA, P. 305. Yoshinaka, F., Nakamura, T., Oguma, H., Fujimura, N., Takeuchi, A., Uesugi, M., Uesugi, K. 2023. Characterization of internal fatigue crack initiation in Ti-6Al-4V alloy via synchrotron radiation X-ray computed tomography. Fatigue Fract Eng Mater Struct. 46(6), pp. 2338-2347. Pan, X., Xu, S., Qian, G., Nikitin, A., Shanyavskiy, A., Palin-Luc, T., Hong, Y. 2020. The Mechanism of Internal Fatigue-Crack Initiation and Early Growth in a Titanium Alloy with Lamellar and Equiaxed Microstructure. Mater Sci Eng A. 798: 140110. Ranc, N., Messager, A., Junet, A., Palin-Luc, T., Buffière, J.Y., Saintier, N., Elmay, M., Mancini, L., King, A., Nadot, Y. 2022. Internal fatigue crack monitoring during ultrasonic fatigue test using temperature measurements and tomography. Mechanics of Materials, Vol. 174. Sakai, T., Ochi, Y., 2004. Very High Cycle Fatigue. Proc. Third Intern Conf VHCF-3, P. 690. Sakai, T., Lian, B., Takeda, M., Shiozawa, K., Oguma, N., Ochi, Y., Nakajima, M., Nakamura, T. 2010. Statistical duplex S-N characteristics of high carbon chromium bearing steel in rotating bending in very high cycle regime. Int J Fatigue 2010;32(3). Pp. 497–504. Shanyavskiy A., 2003. Tolerance fatigue failures of aircraft components. Synergetics in engineering applications; Monografy: Ufa, Russia. (In Russian) Shanyavskiy A., 2005. Synergetical approach to failure analyses of in-service fatigued aircraft components. Part II. In-service crack growth regularities in low-, high- and very-High-cycle fatigue. “Mechanika”, 300, v.1, Politechnika Opolska, Poland. Pp. 277-296. Shanyavskiy, A.A., Soldatenkov, A.P., Nikitin, A.D., 2021. Effect of wave process of plastic deformation at forging on the fatigue fracture mechanism of titanium compressor disks of gas turbine engine. Materials. 14(8). 1851. Shanyavskiy, А.А., Nikitin, A.D., Soldatenkov, A.P., 2022. Very high cycle fatigue of metals. PhysMath, Moscow, P. 400. Shlyannikov, V.N., Yarullin, R.R., Ishtyryakov, I.S., 2019. Failure analysis of an aircraft GTE compressor disk on the base of imitation modeling principles. Procedia Structural Integrity, 2019, Vol. 18. Pp. 322-329. Williams, J.C., Starke Jr., E.A., 2003. Progress in Structural Materials for Aerospace Systems. Acta Mater, 51, Pp. 5775–5799.