Issue 67

D. Fellah et alii, Frattura ed Integrità Strutturale, 67 (2014) 58-79; DOI: 10.3221/IGF-ESIS.67.05

Overall, the findings of this study provide valuable insights into the properties and behavior of recycled concrete, and may contribute to the development of more effective methods for incorporating recycled materials into concrete structures.

A CKNOWLEDGMENTS

T O

he authors would like to thank the L2MGC laboratory of UMMTO and the LSPM laboratory of the Sorbonne Paris North university, and the Tassili project (PHC – 43940NJ) for their contribution to the realization of this work.

D ECLARATION OF INTEREST STATEMENT

n behalf of all authors, the corresponding author states that there is no conflict of interest.

R EFERENCES

[1] Manzi, S., Mazzotti, C., Bignozzi, M.C. (2017). Self-compacting concrete with recycled concrete aggregate: Study of the long-term properties, Constr. Build. Mater., 157(2017), pp. 582–590, DOI: 10.1016/j.conbuildmat.2017.09.129. [2] Yanya, Y. (2018). Blending ratio of recycled aggregate on the performance of pervious concrete, Frat. Ed Integrita Strutt., 12(46), pp. 343–351, DOI: 10.3221/IGF-ESIS.46.31. [3] Younis, A., Ebead, U., Judd, S. (2018). Life cycle cost analysis of structural concrete using seawater, recycled concrete aggregate, and GFRP reinforcement, Constr. Build. Mater., 175, pp. 152–160, DOI: 10.1016/j.conbuildmat.2018.04.183. [4] Xiao, J., Li, J., Zhang, C. (2005). Mechanical properties of recycled aggregate concrete under uniaxial loading, Cem. Concr. Res., 35(6), pp. 1187–1194, DOI: 10.1016/j.cemconres.2004.09.020. [5] Yang, H., Fang, J., Jiang, J., Li, M., Mei, J. (2023). Compressive stress–strain curve of recycled concrete under repeated loading, Constr. Build. Mater., 387(April), pp. 131598, DOI: 10.1016/j.conbuildmat.2023.131598. [6] Zhou, C., Chen, Z. (2017). Mechanical properties of recycled concrete made with different types of coarse aggregate, Constr. Build. Mater., 134, pp. 497–506, DOI: 10.1016/j.conbuildmat.2016.12.163. [7] Bhikshma, V. and Kishore, R. (2010). Development of stress-strain curves for recycled aggregate concrete, Asian J. Civ. Eng. (Bulding Housing), 11(2), pp. 253–261. [8] Xiao, J., Li, W., Sun, Z., Lange, D.A., Shah, S.P. (2013). Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation, Cem. Concr. Compos., 37(1), pp. 276–292, DOI: 10.1016/j.cemconcomp.2013.01.006. [9] Silva, M.P., Mota, M.T., Gadéa, A.S.M., Leite, M.B. , Nagahama, K.J. (2015). The Behavior of Recycled Concrete through the Application of an Isotropic Damage Model, Open J. Civ. Eng., (5), pp. 339–351, DOI: 10.4236/ojce.2015.53034. [10] Peng, Y., Zakaria, S., Sun, Y., Chen, Y., Zhang, L. (2022). Analysis of tensile strength and failure mechanism based on parallel homogenization model for recycled concrete, Materials (Basel)., 15, pp. 145, DOI: 10.3390/ma15010145. [11] Gupta, M., Sharma, M., Shashank Bishnoi. (2022). Multiscale modelling of uniaxial compressive stress-strain behaviour of concrete using analytical homogenisation and damage mechanics, Mech. Mater., 173, pp. 104430, DOI: 10.1016/j.mechmat.2022.104430. [12] Königsberger, M., and., Stéphanie, S. (2018). Micromechanical multiscale modeling of ITZ-driven failure of recycled concrete: Effects of composition and maturity on the material strength, Appl. Sci., 8(6), pp. 1–25, DOI: 10.3390/app8060976. [13] Sharma, M., Bishnoi, S. (2020). Influence of properties of interfacial transition zone on elastic modulus of concrete : Evidence from micromechanical modelling, Constr. Build. Mater., 246, pp. 118381, DOI: 10.1016/j.conbuildmat.2020.118381. [14] Bishnoi, S., Scrivener, K.L. (2009). Cement and Concrete Research µic : A new platform for modelling the hydration of

77