PSI - Issue 66

Yu.G. Matvienko et al. / Procedia Structural Integrity 66 (2024) 148–152 Author name / Structural Integrity Procedia 00 (2025) 000 – 000

152

5

Acknowledgements The authors acknowledge the support of the Russian Science Foundation (project N 24-19-00117). References Aliha, M.R.M., Ayatollahi, M.R., Smith, D.J., Pavier, M.J., 2010. Geometry and Size Effects on Fracture Trajectory in a Limestone Rock under Mixed Mode Loading. Engineering Fracture Mechanics 77, 2200-2212. Erdogan, F., Sih, G. C., 1963. On the Crack Extension in Plates under Plane Loading and Transverse Shear. Journal of Basic Engineering 85, 519-25. Matvienko, Yu. G., Chernyatin, A. S., Rasumovskii, I. A., 2013. Numerical Analysis of the Components of the Three-dimensional Non-singular Stress Field at a Mixed-type Crack Tip. Journal of Machine Manufacture and Reliability 42, 293 – 299. Matvienko, Yu.G., Morozov, E.M., 2017. Two Basic Approaches in a Search of the Crack Propagation Angle. Fatigue and Fracture of Engineering Materials and Structures 40, 1191-1200. Matvienko, Yu.G., 2020. The Effect of Crack-tip Constraint in Some Problems of Fracture Mechanics. Engineering Failure Analysis 110, Article 104413. Pokrovskii, A.M., Matvienko, Yu.G., 2023a. A Fracture Criterion with Biaxial Constraints of Deformations along the Front of a Normal Rupture Crack. Journal of Machine Manufacture and Reliability 52(4), 320 – 328. Pokrovskii, A.M., Matvienko, Yu.G., 2023b. The Two-Parameter Fracture Criterion Taking into Account Two-Dimensional Deformation Constraints at the Front of a Mixed-Type Crack. Journal of Machine Manufacture and Reliability 52(6), 532 – 541. Pook, L.P., 2016. The Linear Elastic Analysis of Cracked Bodies, Crack Paths and Some Practical Crack Path Examples. Engineering Fracture Mechanics 167, 2-19. Sih, G. C., 1974. Strain-energy-density Factor Applied to Mixed Mode Crack Problems. International Journal of Fracture 10, 305-321. Williams, M.L., 1957. On the Stress Distribution at the Base of a Stationary Crack. Journal of Applied Mechanics 24, 109-114.