PSI - Issue 66

Mohammad Jameel Ziedan et al. / Procedia Structural Integrity 66 (2024) 229–246 Author name / Structural Integrity Procedia 00 (2024) 000–000

246 18

Lozano-Sánchez, L. M., Bagudanch, I., Sustaita, A. O., Iturbe-Ek, J., Elizalde, L. E., Garcia-Romeu, M. L., & Elías-Zúñiga, A. (2018). Single point incremental forming of two biocompatible polymers: An insight into their thermal and structural properties. Polymers , 10 (4), 1– 22. https://doi.org/10.3390/polym10040391 Mehta, G., Mohanty, A. K., Thayer, K., Misra, M., & Drzal, L. T. (2005). Novel biocomposites sheet molding compounds for low cost housing panel applications. Journal of Polymers and the Environment , 13 (2), 169–175. https://doi.org/10.1007/s10924-005-3211-x Menta, V. G. K., Vuppalapati, R. R., Chandrashekhara, K., & Schuman, T. (2014). Manufacturing of transparent composites using vacuum infusion process. Polymers and Polymer Composites , 22 (9), 843–850. https://doi.org/10.1177/096739111402200912 Michael Rabinovich, Olsavsky, K. L., Leach, B. (Bud), Cabrera-R  ´os, M., & Castro, J. M. (2008). Sheet Molding Compound Characterization Using Spiral Flow. Journal of Applied Polymer Science , 109 (5), 2465–2471. https://doi.org/10.1002/app Mohammadi, A., Vanhove, H., Attisano, M., Ambrogio, G., & Duflou, J. R. (2015). Single point incremental forming of shape memory polymer foam. MATEC Web of Conferences , 21 . https://doi.org/10.1051/matecconf/20152104007 Rabinovich, M., Olsavsky, K. L., Leach, B. (Bud), Cabrera ‐ Ríos, M., & Castro, J. M. (2008). Sheet molding compound characterization using spiral flow. Journal of Applied Polymer Science , 109 (4), 2465–2471. https://doi.org/10.1002/app.25160 Raheem, H. M., & Al-Mukhtar, A. M. (2020). Experimental and analytical study of the hyperelastic behavior of the hydrogel under unconfined compression. Procedia Structural Integrity , 25 , 3–7. https://doi.org/10.1016/j.prostr.2020.04.002 Raheem, H. M., & Al ‐ Mukhtar, A. M. (2021). Experimental investigation of the effects of infusing a foam into hydrogels on the hyperelastic coefficients. Material Design & Processing Communications , 3 (4), mdp2.180. https://doi.org/10.1002/mdp2.180 Santos, P. A., Spinacé, M. A. S., Fermoselli, K. K. G., & De Paoli, M. A. (2007). Polyamide-6/vegetal fiber composite prepared by extrusion and injection molding. Composites Part A: Applied Science and Manufacturing , 38 (12), 2404–2411. https://doi.org/10.1016/j.compositesa.2007.08.011 Semlali AouraghHassani, F. Z., Achaby, M. El, Bensalah, M. O., Rodrigue, D., Bouhfid, R., & Qaiss, A. E. K. (2020). Injection molding of short fiber thermoplastic bio-composites: Prediction of the fiber orientation. Journal of Composite Materials , 54 (30), 4787–4797. https://doi.org/10.1177/0021998320938454 Shibata, S., Bozlur, R. M., Fukumoto, I., & Kanda, Y. (2010). Effects of injection temperature on mechanical properties of bagasse/polypropylene injection molding composites. BioResources , 5 (4), 2097–2111. https://doi.org/10.15376/biores.5.4.2097-2111 Shirinbayan, M., Fitoussi, J., Meraghni, F., Surowiec, B., Bocquet, M., & Tcharkhtchi, A. (2015). High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension. Composites Part B: Engineering , 82 , 30–41. https://doi.org/10.1016/j.compositesb.2015.07.010 Silva, M. B., Martinho, T. M., & Martins, P. A. F. (2013a). Incremental forming of hole-flanges in polymer sheets. Materials and Manufacturing Processes , 28 (3), 330–335. https://doi.org/10.1080/10426914.2012.682488 Silva, M. B., Martinho, T. M., & Martins, P. A. F. (2013b). Incremental Forming of Hole-Flanges in Polymer Sheets. Materials and Manufacturing Processes , 28 (3), 330–335. https://doi.org/10.1080/10426914.2012.682488 Talla, H., Hassan, A. K., & Oleiwi, J. (2022). Study the Effect of Reinforcing Kevlar Fibers with Carbon Fibers and Glass Fibers on the Performance of the Athletic Prosthetic Foot. Basrah Journal for Engineering Science , 22 (2), 41–48. https://doi.org/10.33971/bjes.22.2.7 Tanaka, K., Fujita, Y., & Katayama, T. (2015). Press and injection hybrid molding of glass fiber reinforced thermoplastics. Materials Characterisation VII , 1 , 225–232. https://doi.org/10.2495/mc150201 Wang, Y., Wang, Z., & Gindy, N. (2010). Control system design of a hybrid vacuum-forming machine system. Proceedings of the 10th WSEAS International Conference on Robotics, Control and ManufProceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM ’10 , September , 113–117. Wang, Z. (2010). Rapid manufacturing of vacuum forming components utilising reconfigurable screw pin tooling . August . Xu, D., Wu, W., Malhotra, R., Chen, J., Lu, B., & Cao, J. (2013). Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming. International Journal of Machine Tools and Manufacture , 73 , 37– 46. https://doi.org/10.1016/j.ijmachtools.2013.06.007 Yang, Z., & Chen, F. (2020). Mechanism of twist in incremental sheet forming of thermoplastic polymer. Materials and Design , 195 , 108997. https://doi.org/10.1016/j.matdes.2020.108997 Zhang, D., Heider, D., & Gillespie, J. W. (2017). Void reduction of high-performance thermoplastic composites via oven vacuum bag processing. Journal of Composite Materials , 51 (30), 4219–4230. https://doi.org/10.1177/0021998317700700 Zhang, D., Heider, D., & Gillespie, J. W. (2022). Design and optimization of oven vacuum bag (OVB) processing for void air removal in high performance thermoplastic composites. Journal of Thermoplastic Composite Materials , 35 (12), 2493–2511. https://doi.org/10.1177/0892705720978248