PSI - Issue 66

Venanzio Giannella et al. / Procedia Structural Integrity 66 (2024) 71–81 Venanzio Giannella et al./ Structural Integrity Procedia 00 (2025) 000 – 000

81

11

Carpinteri A, Spagnoli A, Vantadori S (2009) Multiaxial fatigue life estimation in welded joints using the critical plane approach. Int J Fatigue 31:188 – 196. https://doi.org/10.1016/j.ijfatigue.2008.03.024 Erdogan F, Sih GC (1963) On the Crack Extension in Plates Under Plane Loading and Transverse Shear. J Basic Eng 85:519. https://doi.org/10.1115/1.3656897 Fricke W (2012) IIW recommendations for the fatigue assessment of welded structures by notch stress analysis : IIW -2006-09. Woodhead Pub Giannella V (2021) Stochastic approach to fatigue crack-growth simulation for a railway axle under input data variability. Int J Fatigue 144:106044. https://doi.org/10.1016/j.ijfatigue.2020.106044 Giannella V, Baglivo G, Giordano R, et al (2022a) Structural FEM Analyses of a Landing Gear Testing Machine. Metals (Basel) 12:937. https://doi.org/10.3390/met12060937 Giannella V, Citarella R, Perrella M, Shlyannikov V (2019) Surface crack modelling in an engine compressor disc. Theor Appl Fract Mech 103:102279. https://doi.org/10.1016/j.tafmec.2019.102279 Giannella V, Sepe R, Borrelli A, et al (2021) Numerical investigation on the fracture failure of a railway axle. Eng Fail Anal 129:105680. https://doi.org/10.1016/j.engfailanal.2021.105680 Giannella V, Sepe R, Citarella R (2022b) Fatigue crack propagation for an aircraft compressor under input data variability. Procedia Struct Integr 41:298 – 304. https://doi.org/10.1016/j.prostr.2022.05.035 Hobbacher AF (2016) Recommendations for Fatigue Design of Welded Joints and Components. IIW Collection. Springer International Publishing Lazzarin P, Livieri P, Berto F, Zappalorto M (2008) Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Eng Fract Mech 75:1875 – 1889. https://doi.org/10.1016/j.engfracmech.2006.10.019 Lazzarin P, Sonsino CM, Zambardi R (2004) A notch stress intensity approach to assess the multiaxial fatigue strength of welded tube-to-flange joints subjected to combined loadings. Fatigue Fract Eng Mater Struct 27:127 – 140. https://doi.org/10.1111/j.1460-2695.2004.00733.x Lazzarin P, Tovo R (1998) A notch intensity factor approach to the stress analysis of welds. Fatigue Fract Eng Mater Struct 21:1089 – 1103. https://doi.org/10.1046/j.1460-2695.1998.00097.x Livieri P, Lazzarin P (2005) Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. Int J Fract 133:247 – 276. https://doi.org/10.1007/s10704-005-4043-3 Meneghetti G (2008) The peak stress method applied to fatigue assessments of steel and aluminium fillet-welded joints subjected to mode I loading. Fatigue Fract Eng Mater Struct 31:346 – 369. https://doi.org/10.1111/j.1460-2695.2008.01230.x Meneghetti G (2012) The use of peak stresses for fatigue strength assessments of welded lap joints and cover plates with toe and root failures. Eng Fract Mech 89:40 – 51. https://doi.org/10.1016/j.engfracmech.2012.04.007 Meneghetti G (2013) The peak stress method for fatigue strength assessment of tube-to-flange welded joints under torsion loading. Weld World 57:265 – 275. https://doi.org/10.1007/s40194-013-0022-x Meneghetti G, Campagnolo A (2020) State-of-the-art review of peak stress method for fatigue strength assessment of welded joints. Int J Fatigue 139:105705. https://doi.org/10.1016/j.ijfatigue.2020.105705 Meneghetti G, Campagnolo A, Visentin A, et al (2022) Rapid evaluation of notch stress intensity factors using the peak stress method with 3D tetrahedral finite element models: Comparison of commercial codes. Fatigue Fract Eng Mater Struct. https://doi.org/10.1111/ffe.13645 Meneghetti G, Guzzella C, Atzori B (2014) The peak stress method combined with 3D finite element models for fatigue assessment of toe and root cracking in steel welded joints subjected to axial or bending loading. Fatigue Fract Eng Mater Struct 37:722 – 739. https://doi.org/10.1111/ffe.12171 Meneghetti G, Lazzarin P (2007a) Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components. Fatigue Fract Eng Mater Struct 30:95 – 106. https://doi.org/10.1111/j.1460-2695.2006.01084.x Meneghetti G, Lazzarin P (2011) The Peak Stress Method for Fatigue Strength Assessment of welded joints with weld toe or weld root failures. Weld World 55:22 – 29. https://doi.org/10.1007/BF03321304 Meneghetti G, Lazzarin P (2007b) Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components. Fatigue Fract Eng Mater Struct 30:95 – 106. https://doi.org/10.1111/j.1460-2695.2006.01084.x Pedrosa B, Correia J, Lesiuk G, et al (2022) Fatigue crack growth modelling for S355 structural steel considering plasticity-induced crack-closure by means of UniGrow model. Int J Fatigue 164:107120. https://doi.org/10.1016/j.ijfatigue.2022.107120 Pelizzari J, Campagnolo A, Dengo C, Meneghetti G (2024) Fatigue lifetime assessment of weld ends with idealized or real geometry in steel joints for off-road vehicles using the Peak Stress Method. Int J Fatigue 178:107964 Radaj D, Sonsino CM (1998) Fatigue assessment of welded joints by local approaches. Abington Publishing, Cambridge Radaj D, Sonsino CM, Fricke W (2006) Fatigue Assessment of Welded Joints by Local Approaches, 2nd edn. Woodhead Publishing, Cambridge Radaj D, Vormwald M (2013) Advanced Methods of Fatigue Assessment. Springer Berlin Heidelberg, Berlin, Heidelberg Shlyannikov V, Yarullin R, Yakovlev M, et al (2021) Mixed-mode crack growth simulation in aviation engine compressor disk. Eng Fract Mech 246:107617. https://doi.org/10.1016/j.engfracmech.2021.107617 Sonsino C (1995) Multiaxial fatigue of welded joints under in-phase and out-of-phase local strains and stresses. Int J Fatigue 17:55 – 70. https://doi.org/10.1016/0142-1123(95)93051-3 Susmel L (2009) Multiaxial notch fatigue. Woodhead Publishing, Cambridge, UK, UK Susmel L (2008) Modified Wöhler curve method, theory of critical distances and Eurocode 3: A novel engineering procedure to predict the lifetime of steel welded joints subjected to both uniaxial and multiaxial fatigue loading. Int J Fatigue 30:888 – 907. https://doi.org/10.1016/j.ijfatigue.2007.06.005