PSI - Issue 66

Karolina Głowacka et al. / Procedia Structural Integrity 66 (2024) 108 – 121 Author name / Structural Integrity Procedia 00 (2025) 000–000

121

14

[5] Miyajima T., Sakai M.; Fiber bridging of a carbon fiber-reinforced carbon matrix lamina composite; Journal of Materials Research; 1991; vol. 6, no. 3, s. 539-547. [6] Duan Q., Hu H., Cao D., Cai W., Li S., A new mechanism based cohesive zone model for Mode I delamination coupled with fiber bridging of composite laminates, Composite Structures Volume 332, 15 March 2024, 117931 [7] Wang Q, et al. Failure prediction and optimization for composite pressure vessel combining FEM simulation and machine learning approach. Compos Struct 2024; 337:118099. [8] Sierra-Pérez J., Torres-Arredondo M.A., Güemes A.; Damage and nonlinearities detection in wind turbine blades based on strain field pattern recognition. FBGs, OBR and strain gauges comparison; Composite Structures; 2016; vol. 135; s. 156-166. [9] Smirkic M.F., Koscak J., Damjanowic D.; Application of 2D digital image correlation for displacement and crack width measurement on RC elements; Gradevinar; 2018; vol. 70 (9); s. 771-781. [10] Rastogi P. K.; Holographic Interferometry: Principles and Methods; Springer Series in Optical Sciences; 1994. [11] Luo, X., Tan, H., Lin, G. et al. Strain Field Measurements Using Digital Photogrammetry for Large Inflatable Structures. Exp Tech 41, 453– 462 (2017). https://doi.org/10.1007/s40799-017-0190-5. [12] Zhang T. et al, A design method for continuous fiber-reinforced composite patches, Thin-Walled Structures Volume 204 , November 2024, 112336 [13] Ragupathi B., Jakkula P., Rienks M., Balle F., Online monitoring of pre-crack initiation in carbon fiber-reinforced thermoplastic composites by an ultrasonic cutting tool using high-speed optical imaging and infrared thermography, Ultrasonics Volume 143, September 2024, 107411 [14] G ł owacka K., Ma ł ecka J., Smolnicki T., Analysis of the surface topography of fractures caused by static and impact bending of polypropylene and polyamide PA6 reinforced with continuous glass fibers, Adv. Sci. Technol. Res. J. 2024; 18(5). [15] Ł agoda K, Kurek A, Ł agoda T, B ł a ż ejewski W, Osiecki T, Kroll L. Cracking of thick-walled fiber composites during bending tests. Theor Appl Fract Mech 2019; 101:46–52. [16] Vantadori S, Carpinteri A, G ł owacka K, Greco F, Osiecki T, Ronchei C, et al. Fracture toughness characterisation of a glass fibre-reinforced plastic composite. Fatigue Fract Eng Mater Struct 2021;44:3–13. [17] Kulkarni R.R., Chawla K.K., Vaidya U.K., Koopman M.C., Eberhardt A.W.; Characterization of long fiber thermoplastic/metal laminates; Journal of Material Science; 2008; vol. 43; s. 4391-4398.