Issue 65

A. Joshi et alii, Frattura ed Integrità Strutturale, 65 (2023) 59-73; DOI: 10.3221/IGF-ESIS.65.05

A CKNOWLEDGMENTS

A

uthors gratefully acknowledge the funding and support provided by ARDB-DRDO Government of India, New Delhi, with the Grant-In-Aid scheme of ARDB/01/1051938/M/I under the Structural panel to complete the research work. The authors of this paper appraise their gratitude to the Department of Mechanical Engineering, KLS VDIT, Haliyal, and SDM College of Engineering and Technology, Dharwad for their inspiration and support throughout the investigations.

R EFERENCES

[1] Seyhan, A. T., Tanoglu, M., and Schulte, K. (2008). Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer-based composites. Engineering Fracture Mechanics, 75(18), pp. 5151-5162. [2] Arca, M. A., and Coker, D. (2014, June). Experimental investigation of CNT effect on curved beam strength and interlaminar fracture toughness of CFRP laminates. In Journal of Physics: Conference Series 524(1), p. 012038). [3] Chaudhry, M. S., Czekanski, A., and Zhu, Z. H. (2017). Characterization of carbon nanotube enhanced interlaminar fracture toughness of woven carbon fiber reinforced polymer composites. International Journal of Mechanical Sciences, 131, pp. 480-489. [4] Rodríguez-González, J. A., and Rubio-González, C. (2019). Influence of sprayed multi-walled carbon nanotubes on mode I and mode II interlaminar fracture toughness of carbon fiber/epoxy composites. Advanced Composite Materials, 28(sup1), pp. 19-36. [5] Quan, D., Urdániz, J. L., and Ivankovi ć , A. (2018). Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fiber reinforced epoxy composites using multi-walled carbon nanotubes. Materials and Design, 143, pp. 81-92. [6] Gouda, P. S., Chatterjee, V., Barhai, P. K., Jawali, D., Rahatekar, S., and Wisnom, M. R. (2014). Improved fracture toughness in carbon fiber epoxy composite through novel pre-preg coating method using epoxy terminated butadiene nitrile rubber. Materials and Design (1980-2015), 62, pp. 320-326. [7] Uppin, V. S., Sridhar, I., and Gouda, P. S. (2016). Interlaminar fracture toughness in glass-cellulose reinforced epoxy hybrid composites. In IOP Conference Series: Materials Science and Engineering 149(1), p. 012113. [8] Saravanakumar, K., Arumugam, V., Souhith, R., and Santulli, C. (2020). Influence of milled glass fiber fillers on mode I and mode II interlaminar fracture toughness of epoxy resin for fabrication of glass/epoxy composites. Fibers, 8(6), 36. [9] Liu, B., Cao, S., Gao, N., Cheng, L., Liu, Y., Zhang, Y., and Feng, D. (2019). Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture. Composites Science and Technology, 183, 107829. [10] Wang, Zhi, Xueyou Huang, Longbin Bai, Ruikui Du, Yaqing Liu, Yanfei Zhang, and Guizhe Zhao (2016). Effect of micro-Al2O3 contents on mechanical property of carbon fiber reinforced epoxy matrix composites. Composites Part B: Engineering 91, pp. 392-398. [11] Ravikumar, M. S. S. P., and Prasad, M. S. (2014). Fracture toughness and mechanical properties of aluminum oxide filled chopped strand mat e-glass fibre reinforced-epoxy composites. Int. J. Sci. Res. Publ, 4(7), pp. 1-7. [12] Gouda, P. S., Sridhar, I., and Umarfarooq, M. A. (2022). Crack suppression in glass epoxy hybrid L-bend composites through drawdown coating technique using nano and micro fillers. Materials Today: Proceedings, 62, pp. 7292-7296. [13] Mohammed, R. A. (2016). Effect of Al 2 O 3 powder on some mechanical and physical properties for unsaturated polyester resin hybrid composites materials reinforced by carbon and glass fibers. Engineering and Technology Journal, 34(12 Part A), pp. 2371-2379. [14] Srivastava, V. K., Gries, T., Veit, D., Quadflieg, T., Mohr, B., and Kolloch, M. (2017). Effect of nanomaterial on mode I and mode II interlaminar fracture toughness of woven carbon fabric reinforced polymer composites. Engineering Fracture Mechanics, 180, pp. 73-86. [15] Kostagiannakopoulou, C., Louis, T. H., Sotiriadis, G., and Kostopoulos, V. (2021). Effects of graphene geometrical characteristics on the interlaminar fracture toughness of CFRP laminates. Engineering Fracture Mechanics, 245, 107584. [16] Althahban, S., Alomari, A. S., Sallam, H. E. D. M., and Jazaa, Y. (2023). An investigation of wear, mechanical, and water sorption/solubility behaviors of a commercial restorative composite containing nano-additives. Journal of Materials Research and Technology. [17] Alhazmi, W. H., Jazaa, Y., Mousa, S., Abd-Elhady, A. A., and Sallam, H. E. M. (2021). Tribological and mechanical properties of epoxy reinforced by hybrid nanoparticles. Latin American Journal of Solids and Structures, 18.

74