| Cover | 1 |
| TOC | 3 |
| Sister Associations | 8 |
| FIS News | 10 |
| Q. T. Nguyen, R. Livaoğlu - Degradation of the first frequency of an RC frame with damage levels | 11 |
| A. Abdo, H. A. Mohamed, T. Ryad, S. Ahmed - The impact of utilizing ultra-high performance fiber-reinforced concrete in beam-column joints with different patterns of transverse reinforcement | 21 |
| D. Derdour, M. Behim, M. Benzerara - Effect of date palm and polypropylene fibers on the characteristics of self-compacting concrete: comparative study | 41 |
| P. Ghannadi, S. S. Kourehli, S. Mirjalili - A review of the application of the simulated annealing algorithm in structural health monitoring (1995-2021) | 61 |
| M. Ayad, N. Boumechra, K. Hamdaoui - Damage identification in RC bridges by confronting two approaches: visual inspection and numerical analysis | 87 |
| K. C. Anil, A. B. Hemavathi, A. Adeebpasha - Mechanical and fractured surface characterization of epoxy/red mud/fly ash/aluminium powder filled hybrid composites for automotive applications | 103 |
| A. Eraky, A. M. Sharabash, M. H. El-Feky - Efficiency of shape memory alloy seismic restrainers for several conditions of bridge joints | 114 |
| H. K. Tabar, F. Basaligheh, M. Nikkhah - Evaluating the safety and the effect of blast loading on the shotcrete together with lattice girder support of tunnels | 131 |
| M. V. Boniardi, A. Casaroli, L. Sirangelo, S. Monella, M. Mazzola - Failure analysis of boron steel components for automotive applications | 147 |
| A. Abdo, R. Asker, D. Atef, S. Ahmed - Experimental and numerical investigations of the flexural behaviour of Green - Ultra High Performance Fiber Reinforced Concrete beams under repeated loads | 158 |
| Y. Zhang, W.-H. Ma, H.-Z. Kang, Q. Li - Fracture behaviour of concrete with different replacement rates of iron tailings sand based on double-K criterion | 181 |
| H. Zine Laabidine , B. Zeineddine, F. Noureddine - The influence of notch connection location on the short-term behaviour of timber-concrete composite beams, modelling of TCC beams and research for optimal locations, a numerical study | 196 |
| L. Girelli, M. Giovagnoli, M. Tocci, A. Fortini, M. Gelfi, M. Merlin, A. Pola - Impact behavior of gravity cast AlSi10Mg alloy: Effect of hot isostatic pressing and innovative high pressure T6 heat treatment | 214 |
| F. Gugouch, M. Elghorba, A. Wahid, B. Youssef - Fracture analysis of defect Chlorinated Poly Vinyl Chloride pipes based on burst pressure and prediction their fraction of life | 228 |
| K. Dileep, A. Srinath, N.R. Banapurmath, M. A. Umarfarooq, Ashok M. Sajjan - Mechanical and Fracture Characterization of Epoxy/PLA/Graphene/SiO2 Composites | 239 |
| B. Gudadappanavar, D. K. Kulkarni, P. S. Shivakumar Gouda - An assessment of HDPE fillers and fiber wrapping on the strength of reinforced concrete | 250 |
| Y. Li, L. Zou, Z. Zhu - Optimization of S-N curve fitting based on neighborhood rough set reduction with improved firefly algorithm | 260 |
| M.A. Kenanda, F. Hammadi, Z. Belabed, M.H. Meliani - Free vibration analysis of porous functionally graded plates using a novel Quasi-3D hyperbolic high order shear deformation theory | 276 |