PSI - Issue 61

Jose Beltra Mira et al. / Procedia Structural Integrity 61 (2024) 156–163 Author name / Structural Integrity Procedia 00 (2024) 000–000

163

8

[4] T. D. McLouth, J. V. Severino, P. M. Adams, D. N. Patel, and R. J. Zaldivar, “The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS,” Additive Manufacturing , vol. 18, pp. 103–109, Dec. 2017. [5] J. Torres, M. Cole, A. Owji, Z. DeMastry, and A. P. Gordon, “An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments,” Rapid Prototyping Journal , vol. 22, pp. 387–404, Mar. 2016. [6] M. Arif, S. Kumar, K. Varadarajan, and W. Cantwell, “Performance of biocompatible PEEK processed by fused deposition additive manufacturing,” Materials & Design , vol. 146, pp. 249–259, May 2018. [7] J. Gardan, A. Makke, and N. Recho, “A method to improve the fracture toughness using 3D printing by extrusion deposition,” Procedia Structural Integrity , vol. 2, pp. 144–151, 2016. [8] J. Gardan, A. Makke, and N. Recho, “Fracture improvement by reinforcing the structure of acrylonitrile butadiene styrene parts manufactured by fused deposition modeling,” 3D Printing and Additive Manufacturing , vol. 6, pp. 113–117, Apr. 2019. [9] M. Z. Huang, J. Nomai, and A. K. Schlarb, “The e ff ect ofdi ff erent processing, injection molding (IM) and fused deposition modeling (FDM), on the environmental stress cracking (ESC) behavior of filled and unfilled polycarbonate (PC),” Express Polymer Letters , vol. 15, no. 3, pp. 194–202, 2021. [10] D. Yavas, Z. Zhang, Q. Liu, and D. Wu, “Fracture behavior of 3d printed carbon fiber-reinforced polymer composites,” Composites Science and Technology , vol. 208, p. 108741, May 2021. [11] D. Young, N. Wetmore, and M. Czabaj, “Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acry lonitrile butadiene styrene,” Additive Manufacturing , vol. 22, pp. 508–515, Aug. 2018. [12] Y. Song, Y. Li, W. Song, K. Yee, K.-Y. Lee, and V. Tagarielli, “Measurements of the mechanical response of unidirectional 3D-printed PLA,” Materials & Design , vol. 123, pp. 154–164, June 2017. [13] J. Gardan, A. Makke, and N. Recho, “Improving the fracture toughness of 3d printed thermoplastic polymers by fused deposition modeling,” International Journal of Fracture , vol. 210, no. 1-2, pp. 1–15, 2017. [14] A. Lenti, “Fracture toughness assessment using digital image correlation in additive manufacturing,” Master’s thesis, Polytechnic of Turin, Turin, Italy, 2019. Masters Thesis - Mechanical Engineering. [15] A. E. Patterson, C. Chadha, I. M. Jasiuk, and J. T. Allison, “Design and repeatability analysis of desktop tool for rapid pre-cracking of notched ductile plastic fracture specimens,” Engineering Fracture Mechanics , vol. 217, p. 106536, Aug. 2019. [16] C. Yan, Y.-W. Mai, and S.-X. Wu, “Finite element analysis and experimental evaluation of ductile-brittle transition in compact tension specimen,” International Journal of Fracture , vol. 87, no. 4, pp. 345–362, 1997. [17] J. Jamali, Y. Fan, and J. Wood, “The mixed-mode fracture behavior of epoxy by the compact tension shear test,” International Journal of Adhesion and Adhesives , vol. 63, pp. 79–86, Dec. 2015. [18] R. Gensler, C. Plummer, C. Grein, and H.-H. Kausch, “Influence of the loading rate on the fracture resistance of isotactic polypropylene and impact modified isotactic polypropylene,” Polymer , vol. 41, pp. 3809–3819, May 2000. [19] Sˇ . Hajdu, “The investigation of the stress state near the crack tip of central cracks through numerical analysis,” Procedia Engineering , vol. 69, pp. 477–485, 2014. [20] N. Vidakis, M. Petousis, E. Velidakis, M. Spiridaki, and J. D. Kechagias, “Mechanical performance of fused filament fabricated and 3d-printed polycarbonate polymer and polycarbonate / cellulose nanofiber nanocomposites,” Fibers , vol. 9, p. 74, Nov. 2021. [21] N. Vidakis, M. Petousis, A. Korlos, E. Velidakis, N. Mountakis, C. Charou, and A. Myftari, “Strain rate sensitivity of polycarbonate and thermo plastic polyurethane for various 3d printing temperatures and layer heights,” Polymers , vol. 13, p. 2752, Aug. 2021. [22] T. T. P. Phan and H. T. T. Phan, “Experimental characterization of the mechanical properties of the fused filament fabrication (FFF) printed polycarbonate parts,” in Advances in Engineering Research and Application , pp. 416–422, Springer International Publishing, 2022. [23] R. Lach, A. Schmidtke, L. C. Key, B. Langer, and W. Grellmann, “Fracture mechanics performance of 3d printed amorphous thermoplastic polymers at impact and quasi-static loading,” Procedia Structural Integrity , vol. 42, pp. 3–8, 2022. [24] A. E. Patterson, C. Chadha, I. M. Jasiuk, and J. T. Allison, “Tensile behavior of individual fibers and films made via material extrusion additive manufacturing,” Next Materials , vol. 1, p. 100002, Mar. 2023. [25] A. E. Patterson, C. Chadha, and I. M. Jasiuk, “Identification and mapping of manufacturability constraints for extrusion-based additive manufac turing,” Journal of Manufacturing and Materials Processing , vol. 5, p. 33, Apr. 2021.