PSI - Issue 61

Ahmet Arda Akay et al. / Procedia Structural Integrity 61 (2024) 138–147 A.A. Akay et al. / Structural Integrity Procedia 00 (2024) 000–000

147

10

conducted by Tan et al. (2005). Subsequently, we have discussed the implementation of an iterative bilinear traction separation law within the boundary element method. We apply the developed method to two model problems borrowed from the existing literature, which involve both single and multi-inclusion Representative Volume Elements (RVEs). We investigate the e ff ects of variations in the following parameters through numerical examples:

• Inclusion diameter • Boundary condition • Interface iteration parameters

The results of our proposed model are systematically compared with those found in the literature, revealing a noteworthy agreement between our findings and the established results. This alignment underscores the robustness and reliability of our approach, further reinforcing its applicability in the study of complex materials.

References

Akay, A., 2023. A New Time Domain Boundary Element Formulation For Rate-Dependent Inelasticity With Application To Homogenization. Ph.D. thesis. Middle East Technical University. Akay, A.A., Gu¨rses, E., Go¨ktepe, S., 2023. A new time-domain boundary element formulation for generalized models of viscoelasticity. Engineer ing Analysis with Boundary Elements 150, 30–43. Aliabadi, M.H., 2002. The boundary element method, applications in solids and structures. volume 2. John Wiley & Sons. Barenblatt, G.I., et al., 1962. The mathematical theory of equilibrium cracks in brittle fracture. Advances in applied mechanics 7, 55–129. Brebbia, C., Dominguez, J., 1992. Boundary elements: An introductory course. mcgraw-hill. Southampton, UK . Chaboche, J.L., Feyel, F., Monerie, Y., 2001. Interface debonding models: a viscous regularization with a limited rate dependency. International journal of solids and structures 38, 3127–3160. Dugdale, D.S., 1960. Yielding of steel sheets containing slits. Journal of the Mechanics and Physics of Solids 8, 100–104. Fre´mond, M., 1988. Contact with adhesion, in: Nonsmooth Mechanics and Applications. Springer, pp. 177–221. Inglis, H., Geubelle, P., Matousˇ, K., Tan, H., Huang, Y., 2007. Cohesive modeling of dewetting in particulate composites: micromechanics vs. multiscale finite element analysis. Mechanics of Materials 39, 580–595. Mantic, V., 1993. A new formula for the c-matrix in the somigliana identity. Journal of Elasticity 33, 191–201. Needleman, A., 1987. A continuum model for void nucleation by inclusion debonding . Palmer, A.C., Rice, J.R., 1973. The growth of slip surfaces in the progressive failure of over-consolidated clay. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences 332, 527–548. Raous, M., Cange´mi, L., Cocu, M., 1999. A consistent model coupling adhesion, friction, and unilateral contact. Computer methods in applied mechanics and engineering 177, 383–399. Tan, H., Liu, C., Huang, Y., Geubelle, P.H., 2005. The cohesive law for the particle / matrix interfaces in high explosives. Journal of the Mechanics and Physics of Solids 53, 1892–1917. Tvergaard, V., 1990. E ff ect of fibre debonding in a whisker-reinforced metal. Materials science and engineering: A 125, 203–213. Tvergaard, V., Hutchinson, J.W., 1992. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. Journal of the Mechanics and Physics of Solids 40, 1377–1397. Wu, Z., Lin, Q., Chen, Y., 2020. Application of fast multipole boundary element method for two-dimensional nonlinear interface debonding of particulate composites. Engineering Analysis with Boundary Elements 113, 72–81. Xu, X.P., Needleman, A., 1994. Numerical simulations of fast crack growth in brittle solids. Journal of the Mechanics and Physics of Solids 42, 1397–1434.