Issue 60

L. Wang, Frattura ed Integrità Strutturale, 60 (2022) 380-391; DOI: 10.3221/IGF-ESIS.60.26

[23] Zahedi, H., Emamy, M., Razaghian, A., Mahta, M., Campbell, J. and Tiryakio ğ lu, M. (2007). The effect of Fe-rich intermetallics on the Weibull distribution of tensile properties in a cast Al-5% Si-3% Cu-1% Fe-0.3% Mg alloy. Metall. Mater. Trans. A, 38(3), pp. 659-670. DOI: 10.1007/s11661-006-9068-3. [24] Boyce, B. L. (2010). A sequential tensile method for rapid characterization of extreme-value behavior in microfabricated materials. Exp. Mech., 50(7), pp. 993-997. DOI: 10.1007/s11340-009-9286-x. [25] Hosford, W. F. and Caddell, R. M. (2011). Metal forming: mechanics and metallurgy. Cambridge university press. DOI: 10.1017/CBO9780511811111. [26] Ladani, L., Razmi, J. and Farhan Choudhury, S. (2014). Mechanical anisotropy and strain rate dependency behavior of Ti6Al4V produced using E-beam additive fabrication. J. Eng. Mater. Technol., 136(3). DOI: 10.1115/1.4027729.

391