PSI - Issue 59

Jesús Toribio et al. / Procedia Structural Integrity 59 (2024) 24–30 Jesú s Toribio / Procedia Structural Integrity 00 (2024) 000 – 000

30

7

Herbsleb, G., Schwenk, W., 1985. The influence of dynamic mechanical parameters on stress corrosion cracking of steel - a review. Corrosion 41, 431-437. Hinton, B.R.W., Procter, R.P.M., 1983. The effect of strain-rate and cathodic potential on the tensile ductility of X-65 pipeline steel. Corrosion Science 23, 101-123. Kim, C.D., Wilde, B.E., 1979. A review of the constant strain-rate stress corrosion cracking test. Stress Corrosion Cracking - The Slow Strain Rate Technique, ASTM STP 665 (G.M. Ugiansky and J.H. Payer, Eds.) American Society for Testing and Materials, Philadelphia, pp.97-112. Lidbury, D.P.G., 1983. The estimation of crack tip strain rate parameters characterizing environment assisted crack growth data. Embrittlement by the Localized Crack Environment (R.P. Gangloff, Ed.,) AIME, New York, pp. 149-172. Magnin, T., Chieragatti, R., Oltra, R., 1990. Mechanism of brittle fracture in a ductile 316 alloy during stress corrosion, Acta Metallurgica et Materialia 38, 1313-1319. Maiya, P.S., 1987. Prediction of environmental and strain-rate effects on the stress corrosion cracking of austenitic stainless steels. Journal of Pressure Vessel Technology 109, 116-123. Maiya, P.S., Shack, W.J., 1985. Stress corrosion cracking susceptibility of AISI 316 NG and 316 stainless steel in an impurity environment. Corrosion 41, 630-634. Mayville, R.A., Warren, T.J., Hilton, P.D., 1987. The influence of displacement rate on environmentally assisted cracking of precracked ductile steel specimens. Journal of Engineering Materials and Technology 109, 188-193. Mayville, R.A., Warren, T.J., Hilton, P.D., 1989. Determination of the loading rate needed to obtain environmentally assisted cracking in rising load tests. Journal of Testing and Evaluation 17, 203-211. Parkins, R.N., 1979. Development of strain-rate testing and its implications. Stress Corrosion Cracking - The Slow Strain Rate Technique, ASTM STP 665 (G.M. Ugiansky and J.H. Payer, Eds.) American Society for Testing and Materials, Philadelphia, pp. 5-25. Parkins, R.N., 1987. Factors influencing stress corrosion crack growth kinetics. Corrosion 43, 130-139. Parkins, R.N., 1989. The application of stress corrosion crack growth kinetics to predicting lifetimes of structures. Corrosion Science 29, 1019-1038. Parkins, R.N., 1990. Strain rate effects in stress corrosion cracking. Corrosion 46, 178-189. Patel, P.S., Jarman, R.A., 1985. Strain distribution around a stress corrosion crack tip. British Corrosion Journal 20, 23-27. Puiggali, M., Desjardins, D., Ajana, L., 1987. A critical study of stress corrosion cracking testing methods for stainless steels in hot chloride media. Corrosion Science 27, 585-594. Rice, J.R., Sorensen, E.P., 1978. Continuing crack-tip deformation and fracture for plane-strain crack growth in elastic-plastic solids. Journal of the Mechanics and Physics of Solids 26, 163-186. Rieck, R.M., Atrens, A., Smith, I.O., 1989. The role of crack tip strain rate in the stress corrosion cracking of high strength steels in water. Metallurgical Transactions 20A, 889-895. Scully, J.C., 1979. Propagation of stress corrosion cracks under constant strain-rate conditions. Stress Corrosion Cracking - The Slow Strain Rate Technique, ASTM STP 665 (G.M. Ugiansky and J.H. Payer, Eds.) American Society for Testing and Materials, Philadelphia, pp. 237-253. Scully, J.C., 1980. The interaction of strain-rate and repassivation rate in stress corrosion crack propagation. Corrosion Science 20, 997-1016. Scully, J.R., Moran, P.J., 1988. Influence of strain on the environmental hydrogen-assisted cracking of a high-strength steel in sodium chloride solution. Corrosion 44, 176-185. Thompson, A.W., 1985. Hydrogen-assisted fracture at notches. Materials Science and Technology 1, 711-718. Toribio, J., 1997a. Local strain rate at crack tip: implications in stress corrosion cracking. British Corrosion Journal 32, 41-47. Toribio, J., 1997b. The role of crack tip strain rate in hydrogen assisted cracking. Corrosion Science 39, 1687-1697. Toribio, J., 1998. Material factors influencing notch tip strain rate. British Corrosion Journal 33, 23-28. Toribio, J., Elices, M., 1992. The role of local strain rate in the hydrogen embrittlement of round-notched samples. Corrosion Science 33, 1387-1409. Toribio, J., Kharin, V., 1997a . K -dominance condition in hydrogen assisted cracking: The role of the far field. Fatigue and Fracture of Engineering Materials and Structures 20, 729-745. Toribio, J., Kharin, V., 1997b. The effect of history on hydrogen assisted cracking: 1. Coupling of hydrogenation and crack growth . International Journal of Fracture 88, 233-245. Toribio, J., Kharin, V., 1997c. The effect of history on hydrogen assisted cracking: 2. A Revision of K -Dominance. International Journal of Fracture 88, 247-258. Toribio, J., Kharin, V., 1998. Evaluation of hydrogen assisted cracking: The meaning and significance of the fracture mechanics approach. Nuclear Engineering and Design 182, 149-164. Toribio, J., Kharin, V., 2000. A hydrogen diffusion model for applications in fusion nuclear technology. Fusion Engineering and Design 51-52, 213-218. Toribio, J., Kharin, V., 2015. A generalised model of hydrogen diffusion in metals with multiple trap types. Philosophical Magazine 95, 3429 3451. Toribio, J., Kharin, V., Vergara D., Lorenzo M., 2010. Two-dimensional numerical modelling of hydrogen diffusion in metals assisted by both stress and strain. Advanced Materials Research 138, 117-126. Wang, M., Akiyama, E., Tsuzaki, K., 2005a. Crosshead speed dependence of the notch tensile strength of a high strength steel in the presence of hydrogen. Scripta Materialia 53, 713-718. Wang, M., Akiyama, E., Tsuzaki, K., 2005b. Effect of hydrogen and stress concentration on the notch tensile strength of AISI 4135 steel. Materials Science and Engineering A398, 37-46. Wang, M., Akiyama, E., Tsuzaki, K., 2007. Effect of hydrogen on the fracture behavior of high strength steel during slow strain rate test. Corrosion Science 49, 4081-4097.