| Cover | 1 |
| TOC | 3 |
| Editorial Team | 7 |
| Sister Associations | 10 |
| News | 12 |
| Q.-C Li, L. Zhou, Z.-M. Li, Z.-H. Liu, Y. Fang, L. Zhao, Y. Han - Factors affecting reorientation of hydraulically induced fracture during fracturing with oriented perforations in shale gas reservoirs | 13 |
| R. N. da Cunha, C. de Sousa Vieira, D. L. N. de Figueiredo Amorim - Lumped damage mechanics as a diagnosis tool of reinforced concrete structures in service: case studies of a former bridge arch and a balcony slab | 33 |
| A. Arbaoui, A. Ouahabi, S. Jacques, M. Hamiane - Wavelet-based multiresolution analysis coupled with deep learning to efficiently monitor cracks in concrete | 45 |
| M. Emara, N. Elkomy, H. Hassan - Numerical assessment of reinforced concrete beams strengthened with CFRP sheets under impact loading | 60 |
| K. Nabil, M. Djouri, M. Boucherba, M. Kebaili - Evaluation of rheological performance of a local modified bitumen by Styrene Butadiene Styrene polymer used in wearing course | 77 |
| A. Bouaricha, N. Handel, A. Boutouta, S. Djouimaa - Load bearing capacity of thin-walled rectangular and I-shaped steel sections of short both empty and concrete-filled columns | 89 |
| M. Emara, M. S. Rizk, H.A. Mohamed, M. Zaghlal - Enhancement of circular RC columns using steel mesh as internal or external confinement under the influence of axial compression loading | 98 |
| B.V. Sunil Kumar, V. Neelakantha Londe, M. Lokesha, S.N. Vasantha Kumar, A.O. Surendranathan - Influence of oxidation on fracture toughness of Carbon-Carbon Composites for high-temperature applications | 117 |
| J. Wang, Z. Liu, L. Xue - Structural model updating based on metamodel using modal frequencies | 126 |
| W. Frenelus, H. Peng, J. Zhang - Long-term degradation, damage and fracture in deep rock tunnels: A review on the effect of excavation methods | 140 |
| E. S. M. M. Soliman - Damage severity for cracked simply supported beams | 163 |
| M. Ravikumar, H.N. Redappa, R. Suresh, E. R. Babu, C. R. Nagaraja - Study on micro - nano sized Al2O3 particles on mechanical, wear and fracture behavior of Al7075 Metal Matrix Composites | 178 |
| A. Talhi, M. Z. Touhami, K. Fedaoui - Effect of gaseous carburizing thermochemical treatment on tribological behavior of Ti–6Al–4V alloy | 191 |
| S. Doddamani, C. Wang, M. JinnahSheik Mohamed, Md. ArefinKowser - Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade | 203 |
| I. Elmeguenni - Asymptotic response of friction stir welded joint under cyclic loading | 214 |
| G. Gomes, T. A. A Oliveira, Al. M. D. Neto, L. M. Bezerra - A new methodology to predict damage tolerance based on compliance via global-local analysis | 223 |
| A. I. Fezazi, B. Mechab, M. Salem, B. Serier - Numerical prediction of the ductile damage for axial cracks in pipe under internal pressure | 243 |
| A. Mishra, A. Vats - Supervised machine learning classification algorithms for detection of fracture location in dissimilar friction stir welded joints | 254 |
| M. Utzeri, M. Sasso, G. Chiappini, S. Lenci - Modelling of low-velocity impacts on composite beams in large displacement | 266 |
| M. Azadi, H. Aroo - Bending cyclic behavior and scatter-band analysis of aluminum alloys under beneficial and detrimental conditions through high-cycle fatigue regime | 284 |
| F. R. Andreacola, I. Capasso, L. Pilotti, G. Brando - Influence of 3D-printing parameters on the mechanical properties of 17-4PH stainless steel produced through Selective Laser Melting | 294 |
| H. Suiffi, A. El Maliki, F. Majid, O. Cherkaoui - The effect of using polypropylene fibers on the durability and fire resistance of concrete | 308 |
| T.-H. Nguyen, A.-T. Vu - Evaluating structural safety of trusses using Machine Learning | 320 |
| K. Benyahi, Y. Bouafia, M. S. Kachi, A. Hamri, S. Benakli - Periodic homogenization and damage evolution in RVE composite material with inclusion | 331 |
| S. Çalışkan, R. Gürbüz - Determining the endurance limit of AISI 4340 steels in terms of different statistical approaches | 356 |
| M. Achoui, F. Sebaa, B. Bouchouicha - Influence of themo-mechanical treatments and microstructural state on the fatigue behaviour of a weld seam: case of API X60 steel | 377 |
| M. Słowik - The role of aggregate granulation on testing fracture properties of concrete | 388 |
| R. Capozucca, E. Magagnini, M.V. Vecchietti, S. Khatir - RC beams damaged by cracking and strengthened with NSM CFRP/GFRP rods | 398 |
| R. Capozucca, E. Magagnini, M.V. Vecchietti - Analysis of static response of RC beams with NSM CFRP/GFRP rods | 414 |
| S. Khatir, M. A. Wahab, S. Tiachacht, C. Le Thanh, R. Capozucca, E. Magagnini, B. Benaissa - Damage identification in steel plate using FRF and inverse analysis | 428 |
| T. V. Tretyakova, M. P. Tretyakov, E. A. Chechulina - Experimental study of the Portevin-Le Chatelier effect under complex loading of Al-Mg alloy: procedure issues | 446 |
| A. Ouladbrahim, I. Belaidi, S. Khatir, M. A. Wahab, E. Magagnini, R. Capozucca - Sensitivity analysis of the GTN damage parameters at different temperature for dynamic fracture propagation in X70 pipeline steel using neural network | 454 |