PSI - Issue 54

Daniel F.O. Braga et al. / Procedia Structural Integrity 54 (2024) 631–637 Daniel F.O. Braga et al. / Structural Integrity Procedia 00 (2023) 000–000 7 Kumar, P., Zhu, Z., Nai, S.M., Narayan, R., Ramamurty, U., 2021. Fracture toughness of 304l austenitic stainless steel produced by laser powder bed fusion. Scripta Materialia 202, 114002. URL: https://www.sciencedirect.com/science/article/pii/ S1359646221002827 , doi: https://doi.org/10.1016/j.scriptamat.2021.114002 . Liu, Q., Wang, Y., Zheng, H., Tang, K., Ding, L., Li, H., Gong, S., 2016. Microstructure and mechanical properties of lmd–slm hybrid forming ti6al4v alloy. Materials Science and Engineering: A 660, 24–33. URL: https://www.sciencedirect.com/ science/article/pii/S092150931630185X , doi: https://doi.org/10.1016/j.msea.2016.02.069 . Paul, M.J., Liu, Q., Best, J.P., Li, X., Kruzic, J.J., Ramamurty, U., Gludovatz, B., 2021. Fracture resistance of alsi10mg fabricated by laser powder bed fusion. Acta Materialia 211, 116869. URL: https://www.sciencedirect.com/science/ article/pii/S1359645421002494 , doi: https://doi.org/10.1016/j.actamat.2021.116869 . Petrat, T., Graf, B., Gumenyuk, A., Rethmeier, M., 2016. Laser metal deposition as repair technology for a gas turbine burner made of inconel 718. Physics Procedia 83, 761–768. URL: https://www.sciencedirect.com/science/article/pii/ S1875389216301857 , doi: https://doi.org/10.1016/j.phpro.2016.08.078 . laser Assisted Net Shape Engineering 9 Interna tional Conference on Photonic Technologies Proceedings of the LANE 2016 September 19-22, 2016 Fürth, Germany. Petrat, T., Kersting, R., Graf, B., Rethmeier, M., 2018. Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting. Procedia CIRP 74, 168–171. URL: https://www.sciencedirect.com/ science/article/pii/S2212827118308552 , doi: https://doi.org/10.1016/j.procir.2018.08.071 . 10th CIRP Conference on Photonic Technologies [LANE 2018]. Rengers, S., 2012. Electron beam melting [ebm] vs. direct metal laser sintering [dmls], in: SAMPE Midwest Chapter, Direct Part Manufacturing Workshop. Suryawanshi, J., Prashanth, K., Scudino, S., Eckert, J., Prakash, O., Ramamurty, U., 2016. Simultaneous enhancements of strength and toughness in an al-12si alloy synthesized using selective laser melting. Acta Materialia 115, 285– 294. URL: https://www.sciencedirect.com/science/article/pii/S1359645416304281 , doi: https://doi.org/10.1016/j. actamat.2016.06.009 . Svensson, M., 2009. Ti6Al4V manufactured with electron beam melting (ebm): Mechanical and chemical properties, in: Aeromat 2009. Uhlmann, E., Düchting, J., Petrat, T., Graf, B., Rethmeier, M., 2019. Heat treatment of slm-lmd hybrid components, in: Proceedings of the Lasers in Manufacturing Conference (LIM). Wang, F., Lei, L., Fu, X., Shi, L., Luo, X., Song, Z., Zhang, G., 2023. Toward developing ti alloys with high fatigue crack growth resistance by additive manufacturing. Journal of Materials Science Technology 132, 166–178. URL: https://www. sciencedirect.com/science/article/pii/S1005030222005370 , doi: https://doi.org/10.1016/j.jmst.2022.06.011 .

637