PSI - Issue 53

C.T. Duarte et al. / Procedia Structural Integrity 53 (2024) 299–308 Duarte et al./ Structural Integrity Procedia 00 (2023) 000–000

308 10

by using different types of fibre reinforcements. International Journal of Adhesion and Adhesives 124, 103371. Cavalcanti, D. K. K., de Queiroz, H. F. M., Neto, J. S. S., and Banea, M. D., 2022. Strengthening of additive manufactured parts by using different type of fibre reinforcements. The International Journal of Advanced Manufacturing Technology 123, 1889-903. Cavalcanti, D. K. K., Neto, J. S. S., Queiroz, H. F. M. d., Wu, Y., Neto, V. F. S., and Banea, M. D., 2022. Development and Mechanical Characterization of Short Curauá Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling. Polymers 14, 5047. Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., and Suh, S., 2020. Degradation Rates of Plastics in the Environment. ACS Sustainable Chemistry & Engineering 8, 3494-511. de Mendonça, A., Cavalcanti, D., De Queiroz, H., Neto, J., Chaves, F., and Banea, M., 2022. Mechanical Characterization of Filler Modified ABS 3D Printed Composites Made via Fused Filament Fabrication. Annals of “Dunarea de Jos” University of Galati. Fascicle XII, Welding Equipment and Technology 33, 27-34. de Seixas, G., de Queiroz, H., Neto, J., and Banea, M., 2023. Effect of water on the mechanical and thermal properties of natural fibre reinforced hybrid composites. Journal of Composite Materials 57, 1941-58. Deroiné, M., Le Duigou, A., Corre, Y.-M., Le Gac, P.-Y., Davies, P., César, G., and Bruzaud, S., 2014. Accelerated ageing of polylactide in aqueous environments: Comparative study between distilled water and seawater. Polymer Degradation and Stability 108, 319-29. Harris, M., Potgieter, J., Archer, R., and Arif, K. M., 2019. Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments. Materials 12, 1664. Kakanuru, P., and Pochiraju, K., 2020. Moisture Ingress and Degradation of Additively Manufactured PLA, ABS and PLA/SiC Composite Parts. Additive Manufacturing 36, 101529. Menezes, O., Roberts, T., Motta, G., Patrenos, M.-H., McCurdy, W., Alotaibi, A., Vanderpool, M., Vaseghi, M., Beheshti, A., and Davami, K., 2022. Performance of additively manufactured polylactic acid (PLA) in prolonged marine environments. Polymer Degradation and Stability 199, 109903. Montalvão, G. R., Moshrefi-Torbati, M., Hamilton, A., Machado, R., and João, A., 2020. Behaviour of 3D printed PLA and PLA-PHA in marine environments. IOP Conference Series: Earth and Environmental Science 424, 012013. Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., and Hui, D., 2018. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering 143, 172-96. Shanmugam, V., Pavan, M. V., Babu, K., and Karnan, B., 2021. Fused deposition modeling based polymeric materials and their performance: A review. Polymer Composites 42, 5656-77. Syrlybayev, D., Zharylkassyn, B., Seisekulova, A., Akhmetov, M., Perveen, A., and Talamona, D., 2021. Optimisation of Strength Properties of FDM Printed Parts—A Critical Review. Polymers 13, 1587. Wickramasinghe, S., Do, T., and Tran, P., 2020. FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments. Polymers 12, 1529. Zheng, Y., Zhang, W., Baca Lopez, D. M., and Ahmad, R., 2021. Scientometric Analysis and Systematic Review of Multi-Material Additive Manufacturing of Polymers. Polymers 13, 1957.